From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Daniel Lezcano <daniel.lezcano@linaro.org>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
linux-pm@vger.kernel.org, Jason Cooper <jason@lakedaemon.net>,
Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Ezequiel Garcia <ezequiel.garcia@free-electrons.com>,
linux-arm-kernel@lists.infradead.org,
Lior Amsalem <alior@marvell.com>,
Tawfik Bayouk <tawfik@marvell.com>,
Nadav Haklai <nadavh@marvell.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v6 08/11] ARM: mvebu: Add the PMSU related part of the cpu idle functions
Date: Fri, 28 Mar 2014 12:13:28 +0100 [thread overview]
Message-ID: <1396005211-15573-9-git-send-email-gregory.clement@free-electrons.com> (raw)
In-Reply-To: <1396005211-15573-1-git-send-email-gregory.clement@free-electrons.com>
The cpu idle support will need to access to Power Management Service
Unit. This commit adds the architecture related functions that will be
used in the idle path of the cpuidle driver.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/mach-mvebu/pmsu.c | 132 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 131 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index db5011f98df3..968c8c02c126 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -24,9 +24,12 @@
#include <linux/io.h>
#include <linux/smp.h>
#include <linux/resource.h>
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
#include <asm/smp_plat.h>
+#include <asm/suspend.h>
+#include <asm/tlbflush.h>
#include "common.h"
-#include "pmsu.h"
static void __iomem *pmsu_mp_base;
@@ -34,12 +37,33 @@ static void __iomem *pmsu_mp_base;
#define PMSU_REG_SIZE 0x1000
/* PMSU MP registers */
+#define PMSU_CONTROL_AND_CONFIG(cpu) ((cpu * 0x100) + 0x104)
+#define PMSU_CONTROL_AND_CONFIG_DFS_REQ BIT(18)
+#define PMSU_CONTROL_AND_CONFIG_PWDDN_REQ BIT(16)
+#define PMSU_CONTROL_AND_CONFIG_L2_PWDDN BIT(20)
+
+#define PMSU_CPU_POWER_DOWN_CONTROL(cpu) ((cpu * 0x100) + 0x108)
+
+#define PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP BIT(0)
+
+#define PMSU_STATUS_AND_MASK(cpu) ((cpu * 0x100) + 0x10c)
+#define PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT BIT(16)
+#define PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT BIT(17)
+#define PMSU_STATUS_AND_MASK_IRQ_WAKEUP BIT(20)
+#define PMSU_STATUS_AND_MASK_FIQ_WAKEUP BIT(21)
+#define PMSU_STATUS_AND_MASK_DBG_WAKEUP BIT(22)
+#define PMSU_STATUS_AND_MASK_IRQ_MASK BIT(24)
+#define PMSU_STATUS_AND_MASK_FIQ_MASK BIT(25)
+
#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x124)
/* PMSU fabric registers */
#define L2C_NFABRIC_PM_CTL 0x4
#define L2C_NFABRIC_PM_CTL_PWR_DOWN BIT(20)
+extern void ll_disable_coherency(void);
+extern void ll_enable_coherency(void);
+
static struct of_device_id of_pmsu_table[] = {
{ .compatible = "marvell,armada-370-pmsu", },
{ .compatible = "marvell,armada-370-xp-pmsu", },
@@ -133,4 +157,110 @@ static void armada_370_xp_pmsu_enable_l2_powerdown_onidle(void)
writel(reg, pmsu_mp_base + L2C_NFABRIC_PM_CTL);
}
+static void armada_370_xp_cpu_resume(void)
+{
+ asm volatile("bl ll_add_cpu_to_smp_group\n\t"
+ "bl ll_enable_coherency\n\t"
+ "b cpu_resume\n\t");
+}
+
+/* No locking is needed because we only access per-CPU registers */
+void armada_370_xp_pmsu_idle_prepare(bool deepidle)
+{
+ unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
+ u32 reg;
+
+ if (pmsu_mp_base == NULL)
+ return;
+
+ /*
+ * Adjust the PMSU configuration to wait for WFI signal, enable
+ * IRQ and FIQ as wakeup events, set wait for snoop queue empty
+ * indication and mask IRQ and FIQ from CPU
+ */
+ reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+ reg |= PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT |
+ PMSU_STATUS_AND_MASK_IRQ_WAKEUP |
+ PMSU_STATUS_AND_MASK_FIQ_WAKEUP |
+ PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT |
+ PMSU_STATUS_AND_MASK_IRQ_MASK |
+ PMSU_STATUS_AND_MASK_FIQ_MASK;
+ writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+
+ reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+ /* ask HW to power down the L2 Cache if needed */
+ if (deepidle)
+ reg |= PMSU_CONTROL_AND_CONFIG_L2_PWDDN;
+
+ /* request power down */
+ reg |= PMSU_CONTROL_AND_CONFIG_PWDDN_REQ;
+ writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+
+ /* Disable snoop disable by HW - SW is taking care of it */
+ reg = readl(pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
+ reg |= PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP;
+ writel(reg, pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
+}
+
+static noinline int do_armada_370_xp_cpu_suspend(unsigned long deepidle)
+{
+ armada_370_xp_pmsu_idle_prepare(deepidle);
+
+ v7_exit_coherency_flush(all);
+
+ ll_disable_coherency();
+
+ dsb();
+
+ wfi();
+
+ /* If we are here, wfi failed. As processors run out of
+ * coherency for some time, tlbs might be stale, so flush them
+ */
+ local_flush_tlb_all();
+
+ ll_enable_coherency();
+
+ /* Test the CR_C bit and set it if it was cleared */
+ asm volatile(
+ "mrc p15, 0, %0, c1, c0, 0 \n\t"
+ "tst %0, #(1 << 2) \n\t"
+ "orreq %0, %0, #(1 << 2) \n\t"
+ "mcreq p15, 0, %0, c1, c0, 0 \n\t"
+ "isb "
+ : : "r" (0));
+
+ pr_warn("Failed to suspend the system\n");
+
+ return 0;
+}
+
+static int armada_370_xp_cpu_suspend(unsigned long deepidle)
+{
+ return cpu_suspend(deepidle, do_armada_370_xp_cpu_suspend);
+}
+
+/* No locking is needed because we only access per-CPU registers */
+static noinline void armada_370_xp_pmsu_idle_restore(void)
+{
+ unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
+ u32 reg;
+
+ if (pmsu_mp_base == NULL)
+ return;
+
+ /* cancel ask HW to power down the L2 Cache if possible */
+ reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+ reg &= ~PMSU_CONTROL_AND_CONFIG_L2_PWDDN;
+ writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+
+ /* cancel Enable wakeup events and mask interrupts */
+ reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+ reg &= ~(PMSU_STATUS_AND_MASK_IRQ_WAKEUP | PMSU_STATUS_AND_MASK_FIQ_WAKEUP);
+ reg &= ~PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT;
+ reg &= ~PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT;
+ reg &= ~(PMSU_STATUS_AND_MASK_IRQ_MASK | PMSU_STATUS_AND_MASK_FIQ_MASK);
+ writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+}
+
early_initcall(armada_370_xp_pmsu_init);
--
1.8.1.2
next prev parent reply other threads:[~2014-03-28 11:16 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-28 11:13 [PATCH v6 00/11] CPU idle for Armada XP Gregory CLEMENT
2014-03-28 11:13 ` [PATCH v6 01/11] ARM: PJ4B: Add cpu_suspend/cpu_resume hooks for PJ4B Gregory CLEMENT
2014-03-28 11:13 ` [PATCH v6 02/11] ARM: mvebu: remove the address parameter for ll_set_cpu_coherent Gregory CLEMENT
2014-03-28 11:13 ` [PATCH v6 03/11] ARM: mvebu: ll_set_cpu_coherent always uses the current CPU Gregory CLEMENT
2014-03-28 11:13 ` [PATCH v6 04/11] ARM: mvebu: Remove the unused argument of set_cpu_coherent() Gregory CLEMENT
2014-03-28 11:13 ` [PATCH v6 05/11] ARM: mvebu: Split low level functions to manipulate HW coherency Gregory CLEMENT
2014-03-28 11:13 ` [PATCH v6 06/11] ARM: mvebu: Low level function to disable HW coherency support Gregory CLEMENT
2014-03-28 11:13 ` [PATCH v6 07/11] ARM: mvebu: Allow to power down L2 cache controller in idle mode Gregory CLEMENT
2014-03-28 11:13 ` Gregory CLEMENT [this message]
2014-03-28 11:13 ` [PATCH v6 09/11] ARM: mvebu: Register notifier callback for the cpuidle transition Gregory CLEMENT
2014-04-03 8:18 ` Daniel Lezcano
2014-03-28 11:13 ` [PATCH v6 10/11] cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC Gregory CLEMENT
2014-04-03 8:16 ` Daniel Lezcano
2014-04-04 8:20 ` Gregory CLEMENT
2014-03-28 11:13 ` [PATCH v6 11/11] ARM: mvebu: register the cpuidle driver for the Armada XP SoCs Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1396005211-15573-9-git-send-email-gregory.clement@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=alior@marvell.com \
--cc=andrew@lunn.ch \
--cc=daniel.lezcano@linaro.org \
--cc=ezequiel.garcia@free-electrons.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=nadavh@marvell.com \
--cc=rjw@rjwysocki.net \
--cc=sebastian.hesselbarth@gmail.com \
--cc=tawfik@marvell.com \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®