From: Peter Foley <pefoley2@pefoley.com>
To: linux-kernel@vger.kernel.org
Cc: rdunlap@infradead.org, linux-doc@vger.kernel.org,
Peter Foley <pefoley2@pefoley.com>
Subject: [PATCH 1/4] Documentation: use subdir-y to avoid unnecessary built-in.o files
Date: Thu, 17 Apr 2014 10:11:47 -0400 [thread overview]
Message-ID: <1397743910-18391-1-git-send-email-pefoley2@pefoley.com> (raw)
Change the Documentation makefiles from obj-m to subdir-y
to avoid generating unnecessary built-in.o files since nothing
in Documentation/ is ever linked in to vmlinux.
Signed-off-by: Peter Foley <pefoley2@pefoley.com>
---
Documentation/Makefile | 6 +++---
Documentation/accounting/Makefile | 3 ---
Documentation/auxdisplay/Makefile | 3 ---
Documentation/filesystems/Makefile | 3 ---
Documentation/ia64/Makefile | 3 ---
Documentation/laptops/Makefile | 3 ---
Documentation/misc-devices/Makefile | 1 +
Documentation/misc-devices/mei/Makefile | 3 ---
Documentation/networking/Makefile | 8 +-------
Documentation/networking/timestamping/Makefile | 3 ---
Documentation/pcmcia/Makefile | 3 ---
Documentation/spi/Makefile | 3 ---
Documentation/timers/Makefile | 3 ---
Documentation/watchdog/Makefile | 1 +
Documentation/watchdog/src/Makefile | 3 ---
15 files changed, 6 insertions(+), 43 deletions(-)
create mode 100644 Documentation/misc-devices/Makefile
create mode 100644 Documentation/watchdog/Makefile
diff --git a/Documentation/Makefile b/Documentation/Makefile
index 31d302b..605f84f 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -1,3 +1,3 @@
-obj-m := DocBook/ accounting/ auxdisplay/ connector/ \
- filesystems/ filesystems/configfs/ ia64/ laptops/ networking/ \
- pcmcia/ spi/ timers/ watchdog/src/ misc-devices/mei/
+subdir-y := DocBook accounting auxdisplay connector \
+ filesystems filesystems ia64 laptops networking \
+ pcmcia spi timers watchdog misc-devices
diff --git a/Documentation/accounting/Makefile b/Documentation/accounting/Makefile
index 31929eb..7e232cb 100644
--- a/Documentation/accounting/Makefile
+++ b/Documentation/accounting/Makefile
@@ -1,6 +1,3 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
# List of programs to build
hostprogs-y := getdelays
diff --git a/Documentation/auxdisplay/Makefile b/Documentation/auxdisplay/Makefile
index 51fe233..ada4dac 100644
--- a/Documentation/auxdisplay/Makefile
+++ b/Documentation/auxdisplay/Makefile
@@ -1,6 +1,3 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
# List of programs to build
hostprogs-y := cfag12864b-example
diff --git a/Documentation/filesystems/Makefile b/Documentation/filesystems/Makefile
index a5dd114..883010c 100644
--- a/Documentation/filesystems/Makefile
+++ b/Documentation/filesystems/Makefile
@@ -1,6 +1,3 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
# List of programs to build
hostprogs-y := dnotify_test
diff --git a/Documentation/ia64/Makefile b/Documentation/ia64/Makefile
index b75db69..d493163 100644
--- a/Documentation/ia64/Makefile
+++ b/Documentation/ia64/Makefile
@@ -1,6 +1,3 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
# List of programs to build
hostprogs-y := aliasing-test
diff --git a/Documentation/laptops/Makefile b/Documentation/laptops/Makefile
index 5cb144a..0abe44f 100644
--- a/Documentation/laptops/Makefile
+++ b/Documentation/laptops/Makefile
@@ -1,6 +1,3 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
# List of programs to build
hostprogs-y := dslm
diff --git a/Documentation/misc-devices/Makefile b/Documentation/misc-devices/Makefile
new file mode 100644
index 0000000..e2b7aa4
--- /dev/null
+++ b/Documentation/misc-devices/Makefile
@@ -0,0 +1 @@
+subdir-y := mei
diff --git a/Documentation/misc-devices/mei/Makefile b/Documentation/misc-devices/mei/Makefile
index 00e8c3e..d758047 100644
--- a/Documentation/misc-devices/mei/Makefile
+++ b/Documentation/misc-devices/mei/Makefile
@@ -1,6 +1,3 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
# List of programs to build
hostprogs-y := mei-amt-version
HOSTCFLAGS_mei-amt-version.o += -I$(objtree)/usr/include
diff --git a/Documentation/networking/Makefile b/Documentation/networking/Makefile
index 0aa1ac9..4c5d7c4 100644
--- a/Documentation/networking/Makefile
+++ b/Documentation/networking/Makefile
@@ -1,7 +1 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
-
-obj-m := timestamping/
+subdir-y := timestamping
diff --git a/Documentation/networking/timestamping/Makefile b/Documentation/networking/timestamping/Makefile
index d934afc..bbe6f81 100644
--- a/Documentation/networking/timestamping/Makefile
+++ b/Documentation/networking/timestamping/Makefile
@@ -1,6 +1,3 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
# List of programs to build
hostprogs-y := timestamping hwtstamp_config
diff --git a/Documentation/pcmcia/Makefile b/Documentation/pcmcia/Makefile
index accde87..47a8fa1 100644
--- a/Documentation/pcmcia/Makefile
+++ b/Documentation/pcmcia/Makefile
@@ -1,6 +1,3 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
# List of programs to build
hostprogs-y := crc32hash
diff --git a/Documentation/spi/Makefile b/Documentation/spi/Makefile
index a5b03c8..efa2558 100644
--- a/Documentation/spi/Makefile
+++ b/Documentation/spi/Makefile
@@ -1,6 +1,3 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
# List of programs to build
hostprogs-y := spidev_test spidev_fdx
diff --git a/Documentation/timers/Makefile b/Documentation/timers/Makefile
index 73f75f8..6c09ee6 100644
--- a/Documentation/timers/Makefile
+++ b/Documentation/timers/Makefile
@@ -1,6 +1,3 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
# List of programs to build
hostprogs-$(CONFIG_X86) := hpet_example
diff --git a/Documentation/watchdog/Makefile b/Documentation/watchdog/Makefile
new file mode 100644
index 0000000..6018f45
--- /dev/null
+++ b/Documentation/watchdog/Makefile
@@ -0,0 +1 @@
+subdir-y := src
diff --git a/Documentation/watchdog/src/Makefile b/Documentation/watchdog/src/Makefile
index 40e5f46..4a892c3 100644
--- a/Documentation/watchdog/src/Makefile
+++ b/Documentation/watchdog/src/Makefile
@@ -1,6 +1,3 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
# List of programs to build
hostprogs-y := watchdog-simple watchdog-test
--
1.9.2
next reply other threads:[~2014-04-17 14:12 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-17 14:11 Peter Foley [this message]
2014-04-17 14:11 ` [PATCH 2/4] Documentation: add makefiles for more targets Peter Foley
2014-08-26 16:50 ` Andrey Wagin
2014-04-17 14:11 ` [PATCH 3/4] Documentation: make functions static to avoid prototype warnings Peter Foley
2014-04-17 14:11 ` [PATCH 4/4] Documentation: fix misc. warnings Peter Foley
2014-06-29 2:23 ` [PATCH 1/4] Documentation: use subdir-y to avoid unnecessary built-in.o files Randy Dunlap
2014-07-09 20:52 ` Sam Ravnborg
2014-08-25 20:33 ` Randy Dunlap
2014-09-02 22:58 ` Peter Foley
2014-09-02 23:24 ` Randy Dunlap
2014-09-02 23:29 ` Mark Brown
2014-09-03 23:08 ` Peter Foley
2014-09-03 23:21 ` Mark Brown
2014-09-03 23:38 ` Randy Dunlap
2014-09-03 23:49 ` Mark Brown
2014-09-04 10:42 ` Mark Brown
2014-09-06 0:07 ` Randy Dunlap
2014-09-07 17:59 ` Randy Dunlap
2014-09-07 18:48 ` Mark Brown
2014-09-07 20:52 ` Randy Dunlap
2014-09-08 8:03 ` Stephen Rothwell
2014-09-08 10:22 ` Mark Brown
2014-09-08 14:57 ` Stephen Rothwell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397743910-18391-1-git-send-email-pefoley2@pefoley.com \
--to=pefoley2@pefoley.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rdunlap@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®