mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Peter Foley <pefoley2@pefoley.com>
To: linux-kernel@vger.kernel.org
Cc: rdunlap@infradead.org, linux-doc@vger.kernel.org,
	Peter Foley <pefoley2@pefoley.com>
Subject: [PATCH 3/4] Documentation: make functions static to avoid prototype warnings
Date: Thu, 17 Apr 2014 10:11:49 -0400	[thread overview]
Message-ID: <1397743910-18391-3-git-send-email-pefoley2@pefoley.com> (raw)
In-Reply-To: <1397743910-18391-1-git-send-email-pefoley2@pefoley.com>

Signed-off-by: Peter Foley <pefoley2@pefoley.com>
---
 Documentation/arm/SH-Mobile/vrl4.c                    |  6 +++---
 Documentation/laptops/hpfall.c                        | 16 ++++++++--------
 Documentation/prctl/disable-tsc-ctxt-sw-stress-test.c | 11 ++++++-----
 Documentation/prctl/disable-tsc-on-off-stress-test.c  |  7 ++++---
 Documentation/prctl/disable-tsc-test.c                |  5 +++--
 5 files changed, 24 insertions(+), 21 deletions(-)

diff --git a/Documentation/arm/SH-Mobile/vrl4.c b/Documentation/arm/SH-Mobile/vrl4.c
index e8a1913..4cbbba5 100644
--- a/Documentation/arm/SH-Mobile/vrl4.c
+++ b/Documentation/arm/SH-Mobile/vrl4.c
@@ -77,7 +77,7 @@ struct hdr {
 
 #define ROUND_UP(x)	((x + ALIGN - 1) & ~(ALIGN - 1))
 
-ssize_t do_read(int fd, void *buf, size_t count)
+static ssize_t do_read(int fd, void *buf, size_t count)
 {
 	size_t offset = 0;
 	ssize_t l;
@@ -98,7 +98,7 @@ ssize_t do_read(int fd, void *buf, size_t count)
 	return offset;
 }
 
-ssize_t do_write(int fd, const void *buf, size_t count)
+static ssize_t do_write(int fd, const void *buf, size_t count)
 {
 	size_t offset = 0;
 	ssize_t l;
@@ -117,7 +117,7 @@ ssize_t do_write(int fd, const void *buf, size_t count)
 	return offset;
 }
 
-ssize_t write_zero(int fd, size_t len)
+static ssize_t write_zero(int fd, size_t len)
 {
 	size_t i = len;
 
diff --git a/Documentation/laptops/hpfall.c b/Documentation/laptops/hpfall.c
index b85dbba..d4e1380 100644
--- a/Documentation/laptops/hpfall.c
+++ b/Documentation/laptops/hpfall.c
@@ -21,7 +21,7 @@
 
 char unload_heads_path[64];
 
-int set_unload_heads_path(char *device)
+static int set_unload_heads_path(char *device)
 {
 	char devname[64];
 
@@ -33,7 +33,7 @@ int set_unload_heads_path(char *device)
 				"/sys/block/%s/device/unload_heads", devname);
 	return 0;
 }
-int valid_disk(void)
+static int valid_disk(void)
 {
 	int fd = open(unload_heads_path, O_RDONLY);
 	if (fd < 0) {
@@ -45,7 +45,7 @@ int valid_disk(void)
 	return 1;
 }
 
-void write_int(char *path, int i)
+static void write_int(char *path, int i)
 {
 	char buf[1024];
 	int fd = open(path, O_RDWR);
@@ -61,27 +61,27 @@ void write_int(char *path, int i)
 	close(fd);
 }
 
-void set_led(int on)
+static void set_led(int on)
 {
 	write_int("/sys/class/leds/hp::hddprotect/brightness", on);
 }
 
-void protect(int seconds)
+static void protect(int seconds)
 {
 	write_int(unload_heads_path, seconds*1000);
 }
 
-int on_ac(void)
+static int on_ac(void)
 {
 //	/sys/class/power_supply/AC0/online
 }
 
-int lid_open(void)
+static int lid_open(void)
 {
 //	/proc/acpi/button/lid/LID/state
 }
 
-void ignore_me(void)
+static void ignore_me(void)
 {
 	protect(0);
 	set_led(0);
diff --git a/Documentation/prctl/disable-tsc-ctxt-sw-stress-test.c b/Documentation/prctl/disable-tsc-ctxt-sw-stress-test.c
index f8e8e95..81fdd42 100644
--- a/Documentation/prctl/disable-tsc-ctxt-sw-stress-test.c
+++ b/Documentation/prctl/disable-tsc-ctxt-sw-stress-test.c
@@ -27,19 +27,20 @@
 # define PR_TSC_SIGSEGV		2   /* throw a SIGSEGV instead of reading the TSC */
 #endif
 
-uint64_t rdtsc() {
+static uint64_t rdtsc(void)
+{
 uint32_t lo, hi;
 /* We cannot use "=A", since this would use %rax on x86_64 */
 __asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
 return (uint64_t)hi << 32 | lo;
 }
 
-void sigsegv_expect(int sig)
+static void sigsegv_expect(int sig)
 {
 	/* */
 }
 
-void segvtask(void)
+static void segvtask(void)
 {
 	if (prctl(PR_SET_TSC, PR_TSC_SIGSEGV) < 0)
 	{
@@ -54,13 +55,13 @@ void segvtask(void)
 }
 
 
-void sigsegv_fail(int sig)
+static void sigsegv_fail(int sig)
 {
 	fprintf(stderr, "FATAL ERROR, rdtsc() failed while enabled\n");
 	exit(0);
 }
 
-void rdtsctask(void)
+static void rdtsctask(void)
 {
 	if (prctl(PR_SET_TSC, PR_TSC_ENABLE) < 0)
 	{
diff --git a/Documentation/prctl/disable-tsc-on-off-stress-test.c b/Documentation/prctl/disable-tsc-on-off-stress-test.c
index 1fcd9144..4d83a27 100644
--- a/Documentation/prctl/disable-tsc-on-off-stress-test.c
+++ b/Documentation/prctl/disable-tsc-on-off-stress-test.c
@@ -29,7 +29,8 @@
 
 /* snippet from wikipedia :-) */
 
-uint64_t rdtsc() {
+static uint64_t rdtsc(void)
+{
 uint32_t lo, hi;
 /* We cannot use "=A", since this would use %rax on x86_64 */
 __asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
@@ -38,7 +39,7 @@ return (uint64_t)hi << 32 | lo;
 
 int should_segv = 0;
 
-void sigsegv_cb(int sig)
+static void sigsegv_cb(int sig)
 {
 	if (!should_segv)
 	{
@@ -55,7 +56,7 @@ void sigsegv_cb(int sig)
 	rdtsc();
 }
 
-void task(void)
+static void task(void)
 {
 	signal(SIGSEGV, sigsegv_cb);
 	alarm(10);
diff --git a/Documentation/prctl/disable-tsc-test.c b/Documentation/prctl/disable-tsc-test.c
index 843c81e..2541e65 100644
--- a/Documentation/prctl/disable-tsc-test.c
+++ b/Documentation/prctl/disable-tsc-test.c
@@ -29,14 +29,15 @@ const char *tsc_names[] =
 	[PR_TSC_SIGSEGV] = "PR_TSC_SIGSEGV",
 };
 
-uint64_t rdtsc() {
+static uint64_t rdtsc(void)
+{
 uint32_t lo, hi;
 /* We cannot use "=A", since this would use %rax on x86_64 */
 __asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
 return (uint64_t)hi << 32 | lo;
 }
 
-void sigsegv_cb(int sig)
+static void sigsegv_cb(int sig)
 {
 	int tsc_val = 0;
 
-- 
1.9.2


  parent reply	other threads:[~2014-04-17 14:13 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-17 14:11 [PATCH 1/4] Documentation: use subdir-y to avoid unnecessary built-in.o files Peter Foley
2014-04-17 14:11 ` [PATCH 2/4] Documentation: add makefiles for more targets Peter Foley
2014-08-26 16:50   ` Andrey Wagin
2014-04-17 14:11 ` Peter Foley [this message]
2014-04-17 14:11 ` [PATCH 4/4] Documentation: fix misc. warnings Peter Foley
2014-06-29  2:23 ` [PATCH 1/4] Documentation: use subdir-y to avoid unnecessary built-in.o files Randy Dunlap
2014-07-09 20:52   ` Sam Ravnborg
2014-08-25 20:33 ` Randy Dunlap
2014-09-02 22:58   ` Peter Foley
2014-09-02 23:24     ` Randy Dunlap
2014-09-02 23:29       ` Mark Brown
2014-09-03 23:08         ` Peter Foley
2014-09-03 23:21           ` Mark Brown
2014-09-03 23:38             ` Randy Dunlap
2014-09-03 23:49               ` Mark Brown
2014-09-04 10:42               ` Mark Brown
2014-09-06  0:07                 ` Randy Dunlap
2014-09-07 17:59                   ` Randy Dunlap
2014-09-07 18:48                     ` Mark Brown
2014-09-07 20:52                       ` Randy Dunlap
2014-09-08  8:03                       ` Stephen Rothwell
2014-09-08 10:22                         ` Mark Brown
2014-09-08 14:57                           ` Stephen Rothwell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1397743910-18391-3-git-send-email-pefoley2@pefoley.com \
    --to=pefoley2@pefoley.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rdunlap@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®