[PATCH] regulator: Allow set voltage on fixed regulators

[Tim Kryger <tim.kryger@linaro.org>]

If a regulator consumer requests a voltage range that can be satisfied,
the return value should indicate success even if that regulator has a
fixed voltage.  Since there is already logic to check if the requested
voltage range overlaps the allowed range, set REGULATOR_CHANGE_VOLTAGE
for regulators with constraints that include a positive voltage.

Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
---
 drivers/regulator/of_regulator.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index ea4f36f..a205d62 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -36,7 +36,7 @@ static void of_get_regulation_constraints(struct device_node *np,
 		constraints->max_uV = be32_to_cpu(*max_uV);
 
 	/* Voltage change possible? */
-	if (constraints->min_uV != constraints->max_uV)
+	if (constraints->max_uV > 0)
 		constraints->valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE;
 	/* Only one voltage?  Then make sure it's set. */
 	if (min_uV && max_uV && constraints->min_uV == constraints->max_uV)
-- 
1.7.9.5