mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
To: Felipe Balbi <balbi@ti.com>
Cc: "Ivan T. Ivanov" <iivanov@mm-sol.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org
Subject: [PATCH v8 09/20] usb: phy: msm: Remove unused pclk_src_name
Date: Mon, 28 Apr 2014 16:34:12 +0300	[thread overview]
Message-ID: <1398692063-11372-10-git-send-email-iivanov@mm-sol.com> (raw)
In-Reply-To: <1398692063-11372-1-git-send-email-iivanov@mm-sol.com>

From: "Ivan T. Ivanov" <iivanov@mm-sol.com>

There are no references to 'pclk_src_name' in plaform code,
so it is unused.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
---
 drivers/usb/phy/phy-msm-usb.c | 26 +-------------------------
 include/linux/usb/msm_hsusb.h |  5 -----
 2 files changed, 1 insertion(+), 30 deletions(-)

diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 7eb2abf..c2361bf 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -464,9 +464,6 @@ static int msm_otg_suspend(struct msm_otg *motg)
 	if (!IS_ERR(motg->core_clk))
 		clk_disable_unprepare(motg->core_clk);

-	if (!IS_ERR(motg->pclk_src))
-		clk_disable_unprepare(motg->pclk_src);
-
 	if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
 			motg->pdata->otg_control == OTG_PMIC_CONTROL) {
 		msm_hsusb_ldo_set_mode(motg, 0);
@@ -496,9 +493,6 @@ static int msm_otg_resume(struct msm_otg *motg)
 	if (!atomic_read(&motg->in_lpm))
 		return 0;

-	if (!IS_ERR(motg->pclk_src))
-		clk_prepare_enable(motg->pclk_src);
-
 	clk_prepare_enable(motg->pclk);
 	clk_prepare_enable(motg->clk);
 	if (!IS_ERR(motg->core_clk))
@@ -1396,17 +1390,8 @@ static int msm_otg_probe(struct platform_device *pdev)
 	 * If USB Core is running its protocol engine based on CORE CLK,
 	 * CORE CLK  must be running at >55Mhz for correct HSUSB
 	 * operation and USB core cannot tolerate frequency changes on
-	 * CORE CLK. For such USB cores, vote for maximum clk frequency
-	 * on pclk source
+	 * CORE CLK.
 	 */
-	 motg->pclk_src = ERR_PTR(-ENOENT);
-	 if (motg->pdata->pclk_src_name) {
-		motg->pclk_src = devm_clk_get(&pdev->dev,
-					motg->pdata->pclk_src_name);
-		if (IS_ERR(motg->pclk_src))
-			return PTR_ERR(motg->pclk_src);
-	}
-
 	motg->pclk = devm_clk_get(&pdev->dev, "usb_hs_pclk");
 	if (IS_ERR(motg->pclk)) {
 		dev_err(&pdev->dev, "failed to get usb_hs_pclk\n");
@@ -1446,10 +1431,6 @@ static int msm_otg_probe(struct platform_device *pdev)
 	motg->v1p8  = regs[2].consumer;

 	clk_set_rate(motg->clk, 60000000);
-	if (!IS_ERR(motg->pclk_src)) {
-		clk_set_rate(motg->pclk_src, INT_MAX);
-		clk_prepare_enable(motg->pclk_src);
-	}

 	clk_prepare_enable(motg->clk);
 	clk_prepare_enable(motg->pclk);
@@ -1525,8 +1506,6 @@ disable_clks:
 	clk_disable_unprepare(motg->clk);
 	if (!IS_ERR(motg->core_clk))
 		clk_disable_unprepare(motg->core_clk);
-	if (!IS_ERR(motg->pclk_src))
-		clk_disable_unprepare(motg->pclk_src);
 	return ret;
 }

@@ -1571,9 +1550,6 @@ static int msm_otg_remove(struct platform_device *pdev)
 	clk_disable_unprepare(motg->clk);
 	if (!IS_ERR(motg->core_clk))
 		clk_disable_unprepare(motg->core_clk);
-	if (!IS_ERR(motg->pclk_src))
-		clk_disable_unprepare(motg->pclk_src);
-
 	msm_hsusb_ldo_init(motg, 0);

 	pm_runtime_set_suspended(&pdev->dev);
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
index 72c5830..262ed80 100644
--- a/include/linux/usb/msm_hsusb.h
+++ b/include/linux/usb/msm_hsusb.h
@@ -106,8 +106,6 @@ enum usb_chg_type {
  * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
  * @mode: Supported mode (OTG/peripheral/host).
  * @otg_control: OTG switch controlled by user/Id pin
- * @pclk_src_name: pclk is derived from ebi1_usb_clk in case of 7x27 and 8k
- *              dfab_usb_hs_clk in case of 8660 and 8960.
  */
 struct msm_otg_platform_data {
 	int *phy_init_seq;
@@ -117,7 +115,6 @@ struct msm_otg_platform_data {
 	enum otg_control_type otg_control;
 	enum msm_usb_phy_type phy_type;
 	void (*setup_gpio)(enum usb_otg_state state);
-	char *pclk_src_name;
 	int (*link_clk_reset)(struct clk *link_clk, bool assert);
 	int (*phy_clk_reset)(struct clk *phy_clk);
 };
@@ -129,7 +126,6 @@ struct msm_otg_platform_data {
  * @irq: IRQ number assigned for HSUSB controller.
  * @clk: clock struct of usb_hs_clk.
  * @pclk: clock struct of usb_hs_pclk.
- * @pclk_src: pclk source for voting.
  * @phy_reset_clk: clock struct of usb_phy_clk.
  * @core_clk: clock struct of usb_hs_core_clk.
  * @regs: ioremapped register base address.
@@ -150,7 +146,6 @@ struct msm_otg {
 	int irq;
 	struct clk *clk;
 	struct clk *pclk;
-	struct clk *pclk_src;
 	struct clk *phy_reset_clk;
 	struct clk *core_clk;
 	void __iomem *regs;
--
1.8.3.2


  parent reply	other threads:[~2014-04-28 13:36 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1398692063-11372-1-git-send-email-iivanov@mm-sol.com>
2014-04-28 13:34 ` [PATCH v8 01/20] usb: phy: msm: Make driver selectable on ARCH_QCOM Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 02/20] usb: phy: msm: Remove __init macro from driver probe method Ivan T. Ivanov
     [not found]   ` <535E893B.7050609@cogentembedded.com>
     [not found]     ` <20140428170357.GP30292@saruman.home>
2014-04-28 17:52       ` Ivan T. Ivanov
2014-04-28 17:54         ` Felipe Balbi
2014-04-28 17:57           ` Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 03/20] usb: phy: msm: Move global regulators variables to driver state Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 04/20] usb: phy: msm: Enable deferred driver probing Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 05/20] usb: phy: msm: Migrate to Managed Device Resource allocation Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 06/20] usb: phy: msm: Remove unnecessarily check for valid regulators Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 07/20] usb: phy: msm: Fix checkpatch.pl warnings Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 08/20] usb: phy: msm: Replace custom enum usb_mode_type with enum usb_dr_mode Ivan T. Ivanov
2014-04-28 13:34 ` Ivan T. Ivanov [this message]
2014-04-28 13:34 ` [PATCH v8 10/20] usb: phy: msm: Remove HSUSB prefix from regulator names Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 11/20] usb: phy: msm: Properly check result from platform_get_irq() Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 12/20] usb: phy: msm: Add device tree support and binding information Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 13/20] usb: phy: msm: Use reset framework for LINK and PHY resets Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 14/20] usb: phy: msm: Add support for secondary PHY control Ivan T. Ivanov
2014-04-30 16:22   ` Felipe Balbi
2014-04-28 13:34 ` [PATCH v8 15/20] usb: phy: msm: Correct USB PHY Reset sequence for newer platform Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 16/20] usb: phy: msm: Fix PTS definitions for MSM USB controller Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 17/20] usb: phy: msm: Select secondary PHY via TCSR Ivan T. Ivanov
2014-04-30 16:23   ` Felipe Balbi
2014-05-03  6:45   ` Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 18/20] usb: phy: msm: Handle disconnect events Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 19/20] usb: phy: msm: Vote for corner of VDD CX instead of voltage of VDD CX Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 20/20] usb: phy: msm: Use usb_add_phy_dev() to register device Ivan T. Ivanov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1398692063-11372-10-git-send-email-iivanov@mm-sol.com \
    --to=iivanov@mm-sol.com \
    --cc=balbi@ti.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®