From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
To: Felipe Balbi <balbi@ti.com>
Cc: "Ivan T. Ivanov" <iivanov@mm-sol.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org
Subject: [PATCH v8 05/20] usb: phy: msm: Migrate to Managed Device Resource allocation
Date: Mon, 28 Apr 2014 16:34:08 +0300 [thread overview]
Message-ID: <1398692063-11372-6-git-send-email-iivanov@mm-sol.com> (raw)
In-Reply-To: <1398692063-11372-1-git-send-email-iivanov@mm-sol.com>
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
Move memory, regulators, clocks and irq allocation to
devm_* variants. Properly check for valid clk handles.
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
---
drivers/usb/phy/phy-msm-usb.c | 187 +++++++++++++++---------------------------
1 file changed, 68 insertions(+), 119 deletions(-)
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index b7d73f2..67705fc 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -63,27 +63,18 @@ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init)
int ret = 0;
if (init) {
- motg->vddcx = regulator_get(motg->phy.dev, "HSUSB_VDDCX");
- if (IS_ERR(motg->vddcx)) {
- dev_err(motg->phy.dev, "unable to get hsusb vddcx\n");
- return PTR_ERR(motg->vddcx);
- }
-
ret = regulator_set_voltage(motg->vddcx,
USB_PHY_VDD_DIG_VOL_MIN,
USB_PHY_VDD_DIG_VOL_MAX);
if (ret) {
dev_err(motg->phy.dev, "unable to set the voltage "
"for hsusb vddcx\n");
- regulator_put(motg->vddcx);
return ret;
}
ret = regulator_enable(motg->vddcx);
- if (ret) {
+ if (ret)
dev_err(motg->phy.dev, "unable to enable hsusb vddcx\n");
- regulator_put(motg->vddcx);
- }
} else {
ret = regulator_set_voltage(motg->vddcx, 0,
USB_PHY_VDD_DIG_VOL_MAX);
@@ -93,8 +84,6 @@ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init)
ret = regulator_disable(motg->vddcx);
if (ret)
dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n");
-
- regulator_put(motg->vddcx);
}
return ret;
@@ -105,53 +94,38 @@ static int msm_hsusb_ldo_init(struct msm_otg *motg, int init)
int rc = 0;
if (init) {
- motg->v3p3 = regulator_get(motg->phy.dev, "HSUSB_3p3");
- if (IS_ERR(motg->v3p3)) {
- dev_err(motg->phy.dev, "unable to get hsusb 3p3\n");
- return PTR_ERR(motg->v3p3);
- }
-
rc = regulator_set_voltage(motg->v3p3, USB_PHY_3P3_VOL_MIN,
USB_PHY_3P3_VOL_MAX);
if (rc) {
dev_err(motg->phy.dev, "unable to set voltage level "
"for hsusb 3p3\n");
- goto put_3p3;
+ goto exit;
}
rc = regulator_enable(motg->v3p3);
if (rc) {
dev_err(motg->phy.dev, "unable to enable the hsusb 3p3\n");
- goto put_3p3;
- }
- motg->v1p8 = regulator_get(motg->phy.dev, "HSUSB_1p8");
- if (IS_ERR(motg->v1p8)) {
- dev_err(motg->phy.dev, "unable to get hsusb 1p8\n");
- rc = PTR_ERR(motg->v1p8);
- goto disable_3p3;
+ goto exit;
}
rc = regulator_set_voltage(motg->v1p8, USB_PHY_1P8_VOL_MIN,
USB_PHY_1P8_VOL_MAX);
if (rc) {
dev_err(motg->phy.dev, "unable to set voltage level "
"for hsusb 1p8\n");
- goto put_1p8;
+ goto disable_3p3;
}
rc = regulator_enable(motg->v1p8);
if (rc) {
dev_err(motg->phy.dev, "unable to enable the hsusb 1p8\n");
- goto put_1p8;
+ goto disable_3p3;
}
return 0;
}
regulator_disable(motg->v1p8);
-put_1p8:
- regulator_put(motg->v1p8);
disable_3p3:
regulator_disable(motg->v3p3);
-put_3p3:
- regulator_put(motg->v3p3);
+exit:
return rc;
}
@@ -506,7 +480,7 @@ static int msm_otg_suspend(struct msm_otg *motg)
clk_disable_unprepare(motg->pclk);
clk_disable_unprepare(motg->clk);
- if (motg->core_clk)
+ if (!IS_ERR(motg->core_clk))
clk_disable_unprepare(motg->core_clk);
if (!IS_ERR(motg->pclk_src))
@@ -546,7 +520,7 @@ static int msm_otg_resume(struct msm_otg *motg)
clk_prepare_enable(motg->pclk);
clk_prepare_enable(motg->clk);
- if (motg->core_clk)
+ if (!IS_ERR(motg->core_clk))
clk_prepare_enable(motg->core_clk);
if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
@@ -1404,6 +1378,7 @@ static void msm_otg_debugfs_cleanup(void)
static int msm_otg_probe(struct platform_device *pdev)
{
+ struct regulator_bulk_data regs[3];
int ret = 0;
struct resource *res;
struct msm_otg *motg;
@@ -1415,37 +1390,34 @@ static int msm_otg_probe(struct platform_device *pdev)
return -ENODEV;
}
- motg = kzalloc(sizeof(struct msm_otg), GFP_KERNEL);
+ motg = devm_kzalloc(&pdev->dev, sizeof(struct msm_otg), GFP_KERNEL);
if (!motg) {
dev_err(&pdev->dev, "unable to allocate msm_otg\n");
return -ENOMEM;
}
- motg->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
+ motg->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg),
+ GFP_KERNEL);
if (!motg->phy.otg) {
dev_err(&pdev->dev, "unable to allocate msm_otg\n");
- ret = -ENOMEM;
- goto free_motg;
+ return -ENOMEM;
}
motg->pdata = dev_get_platdata(&pdev->dev);
phy = &motg->phy;
phy->dev = &pdev->dev;
- motg->phy_reset_clk = clk_get(&pdev->dev, "usb_phy_clk");
+ motg->phy_reset_clk = devm_clk_get(&pdev->dev, "usb_phy_clk");
if (IS_ERR(motg->phy_reset_clk)) {
dev_err(&pdev->dev, "failed to get usb_phy_clk\n");
- ret = PTR_ERR(motg->phy_reset_clk);
- goto free_motg;
+ return PTR_ERR(motg->phy_reset_clk);
}
- motg->clk = clk_get(&pdev->dev, "usb_hs_clk");
+ motg->clk = devm_clk_get(&pdev->dev, "usb_hs_clk");
if (IS_ERR(motg->clk)) {
dev_err(&pdev->dev, "failed to get usb_hs_clk\n");
- ret = PTR_ERR(motg->clk);
- goto put_phy_reset_clk;
+ return PTR_ERR(motg->clk);
}
- clk_set_rate(motg->clk, 60000000);
/*
* If USB Core is running its protocol engine based on CORE CLK,
@@ -1454,22 +1426,18 @@ static int msm_otg_probe(struct platform_device *pdev)
* CORE CLK. For such USB cores, vote for maximum clk frequency
* on pclk source
*/
+ motg->pclk_src = ERR_PTR(-ENOENT);
if (motg->pdata->pclk_src_name) {
- motg->pclk_src = clk_get(&pdev->dev,
- motg->pdata->pclk_src_name);
+ motg->pclk_src = devm_clk_get(&pdev->dev,
+ motg->pdata->pclk_src_name);
if (IS_ERR(motg->pclk_src))
- goto put_clk;
- clk_set_rate(motg->pclk_src, INT_MAX);
- clk_prepare_enable(motg->pclk_src);
- } else
- motg->pclk_src = ERR_PTR(-ENOENT);
-
+ return PTR_ERR(motg->pclk_src);
+ }
- motg->pclk = clk_get(&pdev->dev, "usb_hs_pclk");
+ motg->pclk = devm_clk_get(&pdev->dev, "usb_hs_pclk");
if (IS_ERR(motg->pclk)) {
dev_err(&pdev->dev, "failed to get usb_hs_pclk\n");
- ret = PTR_ERR(motg->pclk);
- goto put_pclk_src;
+ return PTR_ERR(motg->pclk);
}
/*
@@ -1477,65 +1445,72 @@ static int msm_otg_probe(struct platform_device *pdev)
* clock is introduced to remove the dependency on AXI
* bus frequency.
*/
- motg->core_clk = clk_get(&pdev->dev, "usb_hs_core_clk");
- if (IS_ERR(motg->core_clk))
- motg->core_clk = NULL;
+ motg->core_clk = devm_clk_get(&pdev->dev, "usb_hs_core_clk");
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "failed to get platform resource mem\n");
- ret = -ENODEV;
- goto put_core_clk;
- }
+ motg->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (IS_ERR(motg->regs))
+ return PTR_ERR(motg->regs);
- motg->regs = ioremap(res->start, resource_size(res));
- if (!motg->regs) {
- dev_err(&pdev->dev, "ioremap failed\n");
- ret = -ENOMEM;
- goto put_core_clk;
- }
dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs);
motg->irq = platform_get_irq(pdev, 0);
if (!motg->irq) {
dev_err(&pdev->dev, "platform_get_irq failed\n");
- ret = -ENODEV;
- goto free_regs;
+ return motg->irq;
+ }
+
+ regs[0].supply = "HSUSB_VDDCX";
+ regs[1].supply = "HSUSB_3p3";
+ regs[2].supply = "HSUSB_1p8";
+
+ ret = devm_regulator_bulk_get(motg->phy.dev, ARRAY_SIZE(regs), regs);
+ if (ret)
+ return ret;
+
+ motg->vddcx = regs[0].consumer;
+ motg->v3p3 = regs[1].consumer;
+ motg->v1p8 = regs[2].consumer;
+
+ clk_set_rate(motg->clk, 60000000);
+ if (!IS_ERR(motg->pclk_src)) {
+ clk_set_rate(motg->pclk_src, INT_MAX);
+ clk_prepare_enable(motg->pclk_src);
}
clk_prepare_enable(motg->clk);
clk_prepare_enable(motg->pclk);
+ if (!IS_ERR(motg->core_clk))
+ clk_prepare_enable(motg->core_clk);
+
ret = msm_hsusb_init_vddcx(motg, 1);
if (ret) {
dev_err(&pdev->dev, "hsusb vddcx configuration failed\n");
- goto free_regs;
+ goto disable_clks;
}
ret = msm_hsusb_ldo_init(motg, 1);
if (ret) {
dev_err(&pdev->dev, "hsusb vreg configuration failed\n");
- goto vddcx_exit;
+ goto disable_vddcx;
}
ret = msm_hsusb_ldo_set_mode(motg, 1);
if (ret) {
dev_err(&pdev->dev, "hsusb vreg enable failed\n");
- goto ldo_exit;
+ goto disable_ldo;
}
- if (motg->core_clk)
- clk_prepare_enable(motg->core_clk);
-
writel(0, USB_USBINTR);
writel(0, USB_OTGSC);
INIT_WORK(&motg->sm_work, msm_otg_sm_work);
INIT_DELAYED_WORK(&motg->chg_work, msm_chg_detect_work);
- ret = request_irq(motg->irq, msm_otg_irq, IRQF_SHARED,
+ ret = devm_request_irq(&pdev->dev, motg->irq, msm_otg_irq, IRQF_SHARED,
"msm_otg", motg);
if (ret) {
dev_err(&pdev->dev, "request irq failed\n");
- goto disable_clks;
+ goto disable_ldo;
}
phy->init = msm_otg_reset;
@@ -1550,7 +1525,7 @@ static int msm_otg_probe(struct platform_device *pdev)
ret = usb_add_phy(&motg->phy, USB_PHY_TYPE_USB2);
if (ret) {
dev_err(&pdev->dev, "usb_add_phy failed\n");
- goto free_irq;
+ goto disable_ldo;
}
platform_set_drvdata(pdev, motg);
@@ -1568,33 +1543,18 @@ static int msm_otg_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
return 0;
-free_irq:
- free_irq(motg->irq, motg);
+
+disable_ldo:
+ msm_hsusb_ldo_init(motg, 0);
+disable_vddcx:
+ msm_hsusb_init_vddcx(motg, 0);
disable_clks:
clk_disable_unprepare(motg->pclk);
clk_disable_unprepare(motg->clk);
-ldo_exit:
- msm_hsusb_ldo_init(motg, 0);
-vddcx_exit:
- msm_hsusb_init_vddcx(motg, 0);
-free_regs:
- iounmap(motg->regs);
-put_core_clk:
- if (motg->core_clk)
- clk_put(motg->core_clk);
- clk_put(motg->pclk);
-put_pclk_src:
- if (!IS_ERR(motg->pclk_src)) {
+ if (!IS_ERR(motg->core_clk))
+ clk_disable_unprepare(motg->core_clk);
+ if (!IS_ERR(motg->pclk_src))
clk_disable_unprepare(motg->pclk_src);
- clk_put(motg->pclk_src);
- }
-put_clk:
- clk_put(motg->clk);
-put_phy_reset_clk:
- clk_put(motg->phy_reset_clk);
-free_motg:
- kfree(motg->phy.otg);
- kfree(motg);
return ret;
}
@@ -1617,7 +1577,7 @@ static int msm_otg_remove(struct platform_device *pdev)
pm_runtime_disable(&pdev->dev);
usb_remove_phy(phy);
- free_irq(motg->irq, motg);
+ disable_irq(motg->irq);
/*
* Put PHY in low power mode.
@@ -1637,26 +1597,15 @@ static int msm_otg_remove(struct platform_device *pdev)
clk_disable_unprepare(motg->pclk);
clk_disable_unprepare(motg->clk);
- if (motg->core_clk)
+ if (!IS_ERR(motg->core_clk))
clk_disable_unprepare(motg->core_clk);
- if (!IS_ERR(motg->pclk_src)) {
+ if (!IS_ERR(motg->pclk_src))
clk_disable_unprepare(motg->pclk_src);
- clk_put(motg->pclk_src);
- }
+
msm_hsusb_ldo_init(motg, 0);
- iounmap(motg->regs);
pm_runtime_set_suspended(&pdev->dev);
- clk_put(motg->phy_reset_clk);
- clk_put(motg->pclk);
- clk_put(motg->clk);
- if (motg->core_clk)
- clk_put(motg->core_clk);
-
- kfree(motg->phy.otg);
- kfree(motg);
-
return 0;
}
--
1.8.3.2
next prev parent reply other threads:[~2014-04-28 13:36 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1398692063-11372-1-git-send-email-iivanov@mm-sol.com>
2014-04-28 13:34 ` [PATCH v8 01/20] usb: phy: msm: Make driver selectable on ARCH_QCOM Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 02/20] usb: phy: msm: Remove __init macro from driver probe method Ivan T. Ivanov
[not found] ` <535E893B.7050609@cogentembedded.com>
[not found] ` <20140428170357.GP30292@saruman.home>
2014-04-28 17:52 ` Ivan T. Ivanov
2014-04-28 17:54 ` Felipe Balbi
2014-04-28 17:57 ` Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 03/20] usb: phy: msm: Move global regulators variables to driver state Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 04/20] usb: phy: msm: Enable deferred driver probing Ivan T. Ivanov
2014-04-28 13:34 ` Ivan T. Ivanov [this message]
2014-04-28 13:34 ` [PATCH v8 06/20] usb: phy: msm: Remove unnecessarily check for valid regulators Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 07/20] usb: phy: msm: Fix checkpatch.pl warnings Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 08/20] usb: phy: msm: Replace custom enum usb_mode_type with enum usb_dr_mode Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 09/20] usb: phy: msm: Remove unused pclk_src_name Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 10/20] usb: phy: msm: Remove HSUSB prefix from regulator names Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 11/20] usb: phy: msm: Properly check result from platform_get_irq() Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 12/20] usb: phy: msm: Add device tree support and binding information Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 13/20] usb: phy: msm: Use reset framework for LINK and PHY resets Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 14/20] usb: phy: msm: Add support for secondary PHY control Ivan T. Ivanov
2014-04-30 16:22 ` Felipe Balbi
2014-04-28 13:34 ` [PATCH v8 15/20] usb: phy: msm: Correct USB PHY Reset sequence for newer platform Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 16/20] usb: phy: msm: Fix PTS definitions for MSM USB controller Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 17/20] usb: phy: msm: Select secondary PHY via TCSR Ivan T. Ivanov
2014-04-30 16:23 ` Felipe Balbi
2014-05-03 6:45 ` Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 18/20] usb: phy: msm: Handle disconnect events Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 19/20] usb: phy: msm: Vote for corner of VDD CX instead of voltage of VDD CX Ivan T. Ivanov
2014-04-28 13:34 ` [PATCH v8 20/20] usb: phy: msm: Use usb_add_phy_dev() to register device Ivan T. Ivanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398692063-11372-6-git-send-email-iivanov@mm-sol.com \
--to=iivanov@mm-sol.com \
--cc=balbi@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®