[PATCH 00/10] xhci: features for usb-next

[Mathias Nyman <mathias.nyman@linux.intel.com>]

Hi Greg

These following xhci patches are for usb-next and hopefully for 3.16

This patcheseries includes a bigger change in xhci command queue code,
(last four patches), a task that I've been working on for a longer time.
Sarah gave green light for v5 before she went on her sabbatical.

http://marc.info/?l=linux-usb&m=139889908701592&w=2

-Mathias

Alexander Gordeev (1):
  xhci: Use pci_enable_msix_exact() instead of pci_enable_msix()

Dan Williams (2):
  xhci: 'noxhci_port_switch' kernel parameter
  usb: catch attempts to submit urbs with a vmalloc'd transfer buffer

Fabio Estevam (1):
  usb: xhci: Use IS_ENABLED() macro

Lin Wang (1):
  xhci: fix wrong port number reported when setting USB2.0 hardware LPM.

Mathias Nyman (4):
  xhci: Use command structures when queuing commands on the command ring
  xhci: Add a global command queue
  xhci: Use completion and status in global command queue
  xhci: rework command timeout and cancellation,

Sarah Sharp (1):
  xhci: Report max device limit when Enable Slot command fails.

 Documentation/kernel-parameters.txt |   3 +
 drivers/usb/core/hcd.c              |   3 +
 drivers/usb/host/pci-quirks.c       |  15 +-
 drivers/usb/host/xhci-hub.c         |  43 ++-
 drivers/usb/host/xhci-mem.c         |  17 +-
 drivers/usb/host/xhci-ring.c        | 587 ++++++++++++++----------------------
 drivers/usb/host/xhci.c             | 271 +++++++++--------
 drivers/usb/host/xhci.h             |  47 +--
 8 files changed, 440 insertions(+), 546 deletions(-)

-- 
1.8.3.2