Re: [PATCH v2 00/12] Introduce STM32MP1 clock driver

[Gabriel FERNANDEZ <gabriel.fernandez@st.com>]

Many Thanks Mike !

Best Regards

Gabriel.


On 03/11/2018 11:42 PM, Michael Turquette wrote:
> Excerpts from gabriel.fernandez@st.com's message of March 8, 2018 8:53 
> am:
>> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>>
>> v2:
>>   - Don't use MFD, use existing binding of STM32 RCC.
>>   - Rework Peripheral and Kernel clocks
>>   - cosmetic changes
>>
>> This patch-set introduces clock driver for STM32MP157 based on Arm 
>> Cortex-A7.
>> The driver patch is split in several patches (by kind of clock) to 
>> facilitate
>> code reviewing.
>
> Applied to clk-stm32mp1 towards v4.17.
>
> Regards,
> Mike
>
>>
>> Gabriel Fernandez (12):
>>   dt-bindings: Document STM32MP1 Reset Clock Controller (RCC) bindings
>>   clk: stm32mp1: Introduce STM32MP1 clock driver
>>   clk: stm32mp1: add MP1 gate for hse/hsi/csi oscillators
>>   clk: stm32mp1: add Source Clocks for PLLs
>>   clk: stm32mp1: add PLL clocks
>>   clk: stm32mp1: add Post-dividers for PLL
>>   clk: stm32mp1: add Sub System clocks
>>   clk: stm32mp1: add Kernel timers
>>   clk: stm32mp1: add Peripheral & Kernel Clocks
>>   clk: stm32mp1: add RTC clock
>>   clk: stm32mp1: add MCO clocks
>>   clk: stm32mp1: add Debug clocks
>>
>>  .../devicetree/bindings/clock/st,stm32mp1-rcc.txt  |   60 +
>>  drivers/clk/Kconfig                                |    6 +
>>  drivers/clk/Makefile                               |    1 +
>>  drivers/clk/clk-stm32mp1.c                         | 2117 
>> ++++++++++++++++++++
>>  include/dt-bindings/clock/stm32mp1-clks.h          |  254 +++
>>  5 files changed, 2438 insertions(+)
>>  create mode 100644 
>> Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt
>>  create mode 100644 drivers/clk/clk-stm32mp1.c
>>  create mode 100644 include/dt-bindings/clock/stm32mp1-clks.h
>>
>> -- 
>> 1.9.1
>>
>>