Re: [PATCH v2 00/12] Introduce STM32MP1 clock driver

[Michael Turquette <mturquette@baylibre.com>]

Excerpts from gabriel.fernandez@st.com's message of March 8, 2018 8:53 am:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
> 
> v2:
>   - Don't use MFD, use existing binding of STM32 RCC.
>   - Rework Peripheral and Kernel clocks
>   - cosmetic changes
> 
> This patch-set introduces clock driver for STM32MP157 based on Arm Cortex-A7.
> The driver patch is split in several patches (by kind of clock) to facilitate
> code reviewing.

Applied to clk-stm32mp1 towards v4.17.

Regards,
Mike

> 
> Gabriel Fernandez (12):
>   dt-bindings: Document STM32MP1 Reset Clock Controller (RCC) bindings
>   clk: stm32mp1: Introduce STM32MP1 clock driver
>   clk: stm32mp1: add MP1 gate for hse/hsi/csi oscillators
>   clk: stm32mp1: add Source Clocks for PLLs
>   clk: stm32mp1: add PLL clocks
>   clk: stm32mp1: add Post-dividers for PLL
>   clk: stm32mp1: add Sub System clocks
>   clk: stm32mp1: add Kernel timers
>   clk: stm32mp1: add Peripheral & Kernel Clocks
>   clk: stm32mp1: add RTC clock
>   clk: stm32mp1: add MCO clocks
>   clk: stm32mp1: add Debug clocks
> 
>  .../devicetree/bindings/clock/st,stm32mp1-rcc.txt  |   60 +
>  drivers/clk/Kconfig                                |    6 +
>  drivers/clk/Makefile                               |    1 +
>  drivers/clk/clk-stm32mp1.c                         | 2117 ++++++++++++++++++++
>  include/dt-bindings/clock/stm32mp1-clks.h          |  254 +++
>  5 files changed, 2438 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt
>  create mode 100644 drivers/clk/clk-stm32mp1.c
>  create mode 100644 include/dt-bindings/clock/stm32mp1-clks.h
> 
> -- 
> 1.9.1
> 
>