[PATCH v2 0/3] mmc: sdhci: Use mmc core regulator infrastucture

mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed

* [PATCH v2 0/3] mmc: sdhci: Use mmc core regulator infrastucture
@ 2014-06-05 22:00 Markus Mayer
  2014-06-05 22:00 ` [PATCH v2 1/3] " Markus Mayer
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Markus Mayer @ 2014-06-05 22:00 UTC (permalink / raw)
  To: Chris Ball, Ulf Hansson
  Cc: Tim Kryger, Mike Looijmans, Andrew Bresticker, Linux MMC List,
	Linux Kernel Mailing List

This series switches the common SDHCI code over to use mmc_host's
regulator pointers rather than keeping its own set.

In addition, we can now re-use the newly introduced local "mmc" pointer
in several other function calls in lieu of using host->mmc.

The first patch in the series has been posted before
(https://lkml.org/lkml/2014/4/24/947). The two follow-on patches have
not. Patches 2 & 3 could be squashed together if the maintainers are so
inclined.

This series is based on mmc-next.

Changes from v1:
  - Resolved merge conflicts resulting from RMK's MMC series. The most
    significant conflict was the move of regulator code from
    sdhci_do_set_ios() to sdhci_set_power().
  - Added follow-on patches 2 & 3 of the series.
  - Updated Tim Kryger's e-mail address.

Markus Mayer (2):
  mmc: sdhci: Use existing mmc pointer calling mmc_regulator_set_ocr()
  mmc: sdhci: Replace host->mmc with mmc where possible

Tim Kryger (1):
  mmc: sdhci: Use mmc core regulator infrastucture

 drivers/mmc/host/sdhci.c  | 113 ++++++++++++++++++----------------------------
 include/linux/mmc/sdhci.h |   3 --
 2 files changed, 44 insertions(+), 72 deletions(-)

-- 
1.9.1

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH v2 1/3] mmc: sdhci: Use mmc core regulator infrastucture
  2014-06-05 22:00 [PATCH v2 0/3] mmc: sdhci: Use mmc core regulator infrastucture Markus Mayer
@ 2014-06-05 22:00 ` Markus Mayer
  2014-06-05 22:00 ` [PATCH v2 2/3] mmc: sdhci: Use existing mmc pointer calling mmc_regulator_set_ocr() Markus Mayer
  2014-06-05 22:00 ` [PATCH v2 3/3] mmc: sdhci: Replace host->mmc with mmc where possible Markus Mayer
  2 siblings, 0 replies; 4+ messages in thread
From: Markus Mayer @ 2014-06-05 22:00 UTC (permalink / raw)
  To: Chris Ball, Ulf Hansson
  Cc: Tim Kryger, Mike Looijmans, Andrew Bresticker, Linux MMC List,
	Linux Kernel Mailing List

From: Tim Kryger <tim.kryger@gmail.com>

Switch the common SDHCI code over to use mmc_host's regulator pointers
and remove the ones in the sdhci_host structure.  Additionally, use the
common mmc_regulator_get_supply function to get the regulators and set
the ocr_avail mask.

This change sets the ocr_avail directly based upon the voltage ranges
supported which ensures ocr_avail is set correctly while allowing the
use of regulators that can't provide exactly 1.8v, 3.0v, or 3.3v.

Signed-off-by: Tim Kryger <tim.kryger@gmail.com>
Signed-off-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Matt Porter <mporter@linaro.org>
---
 drivers/mmc/host/sdhci.c  | 97 ++++++++++++++++++-----------------------------
 include/linux/mmc/sdhci.h |  3 --
 2 files changed, 36 insertions(+), 64 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 47055f3..ee524b0 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1223,6 +1223,7 @@ EXPORT_SYMBOL_GPL(sdhci_set_clock);
 static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
 			    unsigned short vdd)
 {
+	struct mmc_host *mmc = host->mmc;
 	u8 pwr = 0;
 
 	if (mode != MMC_POWER_OFF) {
@@ -1284,9 +1285,9 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
 			mdelay(10);
 	}
 
-	if (host->vmmc) {
+	if (!IS_ERR(mmc->supply.vmmc)) {
 		spin_unlock_irq(&host->lock);
-		mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd);
+		mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, vdd);
 		spin_lock_irq(&host->lock);
 	}
 }
@@ -1440,13 +1441,15 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 {
 	unsigned long flags;
 	u8 ctrl;
+	struct mmc_host *mmc = host->mmc;
 
 	spin_lock_irqsave(&host->lock, flags);
 
 	if (host->flags & SDHCI_DEVICE_DEAD) {
 		spin_unlock_irqrestore(&host->lock, flags);
-		if (host->vmmc && ios->power_mode == MMC_POWER_OFF)
-			mmc_regulator_set_ocr(host->mmc, host->vmmc, 0);
+		if (!IS_ERR(mmc->supply.vmmc) &&
+		    ios->power_mode == MMC_POWER_OFF)
+			mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, 0);
 		return;
 	}
 
@@ -1707,6 +1710,7 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
 static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 						struct mmc_ios *ios)
 {
+	struct mmc_host *mmc = host->mmc;
 	u16 ctrl;
 	int ret;
 
@@ -1725,8 +1729,9 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 		ctrl &= ~SDHCI_CTRL_VDD_180;
 		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
 
-		if (host->vqmmc) {
-			ret = regulator_set_voltage(host->vqmmc, 2700000, 3600000);
+		if (!IS_ERR(mmc->supply.vqmmc)) {
+			ret = regulator_set_voltage(mmc->supply.vqmmc, 2700000,
+						    3600000);
 			if (ret) {
 				pr_warning("%s: Switching to 3.3V signalling voltage "
 						" failed\n", mmc_hostname(host->mmc));
@@ -1746,8 +1751,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 
 		return -EAGAIN;
 	case MMC_SIGNAL_VOLTAGE_180:
-		if (host->vqmmc) {
-			ret = regulator_set_voltage(host->vqmmc,
+		if (!IS_ERR(mmc->supply.vqmmc)) {
+			ret = regulator_set_voltage(mmc->supply.vqmmc,
 					1700000, 1950000);
 			if (ret) {
 				pr_warning("%s: Switching to 1.8V signalling voltage "
@@ -1776,8 +1781,9 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 
 		return -EAGAIN;
 	case MMC_SIGNAL_VOLTAGE_120:
-		if (host->vqmmc) {
-			ret = regulator_set_voltage(host->vqmmc, 1100000, 1300000);
+		if (!IS_ERR(mmc->supply.vqmmc)) {
+			ret = regulator_set_voltage(mmc->supply.vqmmc, 1100000,
+						    1300000);
 			if (ret) {
 				pr_warning("%s: Switching to 1.2V signalling voltage "
 						" failed\n", mmc_hostname(host->mmc));
@@ -2962,25 +2968,22 @@ int sdhci_add_host(struct sdhci_host *host)
 	    !(host->mmc->caps & MMC_CAP_NONREMOVABLE))
 		mmc->caps |= MMC_CAP_NEEDS_POLL;
 
+	/* If there are external regulators, get them */
+	if (mmc_regulator_get_supply(mmc) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
 	/* If vqmmc regulator and no 1.8V signalling, then there's no UHS */
-	host->vqmmc = regulator_get_optional(mmc_dev(mmc), "vqmmc");
-	if (IS_ERR_OR_NULL(host->vqmmc)) {
-		if (PTR_ERR(host->vqmmc) < 0) {
-			pr_info("%s: no vqmmc regulator found\n",
-				mmc_hostname(mmc));
-			host->vqmmc = NULL;
-		}
-	} else {
-		ret = regulator_enable(host->vqmmc);
-		if (!regulator_is_supported_voltage(host->vqmmc, 1700000,
-			1950000))
+	if (!IS_ERR(mmc->supply.vqmmc)) {
+		ret = regulator_enable(mmc->supply.vqmmc);
+		if (!regulator_is_supported_voltage(mmc->supply.vqmmc, 1700000,
+						    1950000))
 			caps[1] &= ~(SDHCI_SUPPORT_SDR104 |
 					SDHCI_SUPPORT_SDR50 |
 					SDHCI_SUPPORT_DDR50);
 		if (ret) {
 			pr_warn("%s: Failed to enable vqmmc regulator: %d\n",
 				mmc_hostname(mmc), ret);
-			host->vqmmc = NULL;
+			mmc->supply.vqmmc = NULL;
 		}
 	}
 
@@ -3041,34 +3044,6 @@ int sdhci_add_host(struct sdhci_host *host)
 
 	ocr_avail = 0;
 
-	host->vmmc = regulator_get_optional(mmc_dev(mmc), "vmmc");
-	if (IS_ERR_OR_NULL(host->vmmc)) {
-		if (PTR_ERR(host->vmmc) < 0) {
-			pr_info("%s: no vmmc regulator found\n",
-				mmc_hostname(mmc));
-			host->vmmc = NULL;
-		}
-	}
-
-#ifdef CONFIG_REGULATOR
-	/*
-	 * Voltage range check makes sense only if regulator reports
-	 * any voltage value.
-	 */
-	if (host->vmmc && regulator_get_voltage(host->vmmc) > 0) {
-		ret = regulator_is_supported_voltage(host->vmmc, 2700000,
-			3600000);
-		if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330)))
-			caps[0] &= ~SDHCI_CAN_VDD_330;
-		if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_300)))
-			caps[0] &= ~SDHCI_CAN_VDD_300;
-		ret = regulator_is_supported_voltage(host->vmmc, 1700000,
-			1950000);
-		if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_180)))
-			caps[0] &= ~SDHCI_CAN_VDD_180;
-	}
-#endif /* CONFIG_REGULATOR */
-
 	/*
 	 * According to SD Host Controller spec v3.00, if the Host System
 	 * can afford more than 150mA, Host Driver should set XPC to 1. Also
@@ -3077,8 +3052,8 @@ int sdhci_add_host(struct sdhci_host *host)
 	 * value.
 	 */
 	max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT);
-	if (!max_current_caps && host->vmmc) {
-		u32 curr = regulator_get_current_limit(host->vmmc);
+	if (!max_current_caps && !IS_ERR(mmc->supply.vmmc)) {
+		u32 curr = regulator_get_current_limit(mmc->supply.vmmc);
 		if (curr > 0) {
 
 			/* convert to SDHCI_MAX_CURRENT format */
@@ -3118,8 +3093,11 @@ int sdhci_add_host(struct sdhci_host *host)
 				   SDHCI_MAX_CURRENT_MULTIPLIER;
 	}
 
+	if (mmc->ocr_avail)
+		ocr_avail &= mmc->ocr_avail;
+
 	if (host->ocr_mask)
-		ocr_avail = host->ocr_mask;
+		ocr_avail &= host->ocr_mask;
 
 	mmc->ocr_avail = ocr_avail;
 	mmc->ocr_avail_sdio = ocr_avail;
@@ -3273,6 +3251,7 @@ EXPORT_SYMBOL_GPL(sdhci_add_host);
 
 void sdhci_remove_host(struct sdhci_host *host, int dead)
 {
+	struct mmc_host *mmc = host->mmc;
 	unsigned long flags;
 
 	if (dead) {
@@ -3310,15 +3289,11 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
 
 	tasklet_kill(&host->finish_tasklet);
 
-	if (host->vmmc) {
-		regulator_disable(host->vmmc);
-		regulator_put(host->vmmc);
-	}
+	if (!IS_ERR(mmc->supply.vmmc))
+		regulator_disable(mmc->supply.vmmc);
 
-	if (host->vqmmc) {
-		regulator_disable(host->vqmmc);
-		regulator_put(host->vqmmc);
-	}
+	if (!IS_ERR(mmc->supply.vqmmc))
+		regulator_disable(mmc->supply.vqmmc);
 
 	if (host->adma_desc)
 		dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE,
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 08abe99..09ebe57 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -104,9 +104,6 @@ struct sdhci_host {
 
 	const struct sdhci_ops *ops;	/* Low level hw interface */
 
-	struct regulator *vmmc;		/* Power regulator (vmmc) */
-	struct regulator *vqmmc;	/* Signaling regulator (vccq) */
-
 	/* Internal data */
 	struct mmc_host *mmc;	/* MMC structure */
 	u64 dma_mask;		/* custom DMA mask */
-- 
1.9.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH v2 2/3] mmc: sdhci: Use existing mmc pointer calling mmc_regulator_set_ocr()
  2014-06-05 22:00 [PATCH v2 0/3] mmc: sdhci: Use mmc core regulator infrastucture Markus Mayer
  2014-06-05 22:00 ` [PATCH v2 1/3] " Markus Mayer
@ 2014-06-05 22:00 ` Markus Mayer
  2014-06-05 22:00 ` [PATCH v2 3/3] mmc: sdhci: Replace host->mmc with mmc where possible Markus Mayer
  2 siblings, 0 replies; 4+ messages in thread
From: Markus Mayer @ 2014-06-05 22:00 UTC (permalink / raw)
  To: Chris Ball, Ulf Hansson
  Cc: Tim Kryger, Mike Looijmans, Andrew Bresticker, Linux MMC List,
	Linux Kernel Mailing List

Use the existing "mmc" pointer rather than host->mmc as first argument
to mmc_regulator_set_ocr().

Signed-off-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Matt Porter <mporter@linaro.org>
---
 drivers/mmc/host/sdhci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index ee524b0..f15720e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1287,7 +1287,7 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
 
 	if (!IS_ERR(mmc->supply.vmmc)) {
 		spin_unlock_irq(&host->lock);
-		mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, vdd);
+		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
 		spin_lock_irq(&host->lock);
 	}
 }
@@ -1449,7 +1449,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 		spin_unlock_irqrestore(&host->lock, flags);
 		if (!IS_ERR(mmc->supply.vmmc) &&
 		    ios->power_mode == MMC_POWER_OFF)
-			mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, 0);
+			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
 		return;
 	}
 
-- 
1.9.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH v2 3/3] mmc: sdhci: Replace host->mmc with mmc where possible
  2014-06-05 22:00 [PATCH v2 0/3] mmc: sdhci: Use mmc core regulator infrastucture Markus Mayer
  2014-06-05 22:00 ` [PATCH v2 1/3] " Markus Mayer
  2014-06-05 22:00 ` [PATCH v2 2/3] mmc: sdhci: Use existing mmc pointer calling mmc_regulator_set_ocr() Markus Mayer
@ 2014-06-05 22:00 ` Markus Mayer
  2 siblings, 0 replies; 4+ messages in thread
From: Markus Mayer @ 2014-06-05 22:00 UTC (permalink / raw)
  To: Chris Ball, Ulf Hansson
  Cc: Tim Kryger, Mike Looijmans, Andrew Bresticker, Linux MMC List,
	Linux Kernel Mailing List

After the switch to the MMC core regulator infrastucture, we already
have a local "mmc" pointer in various functions. There is no longer a
need to access the data structure via host->mmc.

Signed-off-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Matt Porter <mporter@linaro.org>
---
 drivers/mmc/host/sdhci.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index f15720e..86683bb 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1734,7 +1734,7 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 						    3600000);
 			if (ret) {
 				pr_warning("%s: Switching to 3.3V signalling voltage "
-						" failed\n", mmc_hostname(host->mmc));
+						" failed\n", mmc_hostname(mmc));
 				return -EIO;
 			}
 		}
@@ -1747,7 +1747,7 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 			return 0;
 
 		pr_warning("%s: 3.3V regulator output did not became stable\n",
-				mmc_hostname(host->mmc));
+				mmc_hostname(mmc));
 
 		return -EAGAIN;
 	case MMC_SIGNAL_VOLTAGE_180:
@@ -1756,7 +1756,7 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 					1700000, 1950000);
 			if (ret) {
 				pr_warning("%s: Switching to 1.8V signalling voltage "
-						" failed\n", mmc_hostname(host->mmc));
+						" failed\n", mmc_hostname(mmc));
 				return -EIO;
 			}
 		}
@@ -1777,7 +1777,7 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 			return 0;
 
 		pr_warning("%s: 1.8V regulator output did not became stable\n",
-				mmc_hostname(host->mmc));
+				mmc_hostname(mmc));
 
 		return -EAGAIN;
 	case MMC_SIGNAL_VOLTAGE_120:
@@ -1786,7 +1786,7 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
 						    1300000);
 			if (ret) {
 				pr_warning("%s: Switching to 1.2V signalling voltage "
-						" failed\n", mmc_hostname(host->mmc));
+						" failed\n", mmc_hostname(mmc));
 				return -EIO;
 			}
 		}
@@ -3261,7 +3261,7 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
 
 		if (host->mrq) {
 			pr_err("%s: Controller removed during "
-				" transfer!\n", mmc_hostname(host->mmc));
+				" transfer!\n", mmc_hostname(mmc));
 
 			host->mrq->cmd->error = -ENOMEDIUM;
 			tasklet_schedule(&host->finish_tasklet);
@@ -3272,7 +3272,7 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
 
 	sdhci_disable_card_detection(host);
 
-	mmc_remove_host(host->mmc);
+	mmc_remove_host(mmc);
 
 #ifdef SDHCI_USE_LEDS_CLASS
 	led_classdev_unregister(&host->led);
@@ -3296,7 +3296,7 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
 		regulator_disable(mmc->supply.vqmmc);
 
 	if (host->adma_desc)
-		dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE,
+		dma_free_coherent(mmc_dev(mmc), ADMA_SIZE,
 				  host->adma_desc, host->adma_addr);
 	kfree(host->align_buffer);
 
-- 
1.9.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2014-06-05 22:01 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-06-05 22:00 [PATCH v2 0/3] mmc: sdhci: Use mmc core regulator infrastucture Markus Mayer
2014-06-05 22:00 ` [PATCH v2 1/3] " Markus Mayer
2014-06-05 22:00 ` [PATCH v2 2/3] mmc: sdhci: Use existing mmc pointer calling mmc_regulator_set_ocr() Markus Mayer
2014-06-05 22:00 ` [PATCH v2 3/3] mmc: sdhci: Replace host->mmc with mmc where possible Markus Mayer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®