From: Michal Nazarewicz <mina86@mina86.com>
To: Felipe Balbi <balbi@ti.com>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Alan Stern <stern@rowland.harvard.edu>,
Yang Wei <Wei.Yang@windriver.com>,
Michal Nazarewicz <mina86@mina86.com>
Subject: [PATCHv4 6/6] usb: gadget: f_mass_storage: Fix a warning while loading g_mass_storage
Date: Fri, 13 Jun 2014 15:38:09 +0200 [thread overview]
Message-ID: <1402666689-4971-7-git-send-email-mina86@mina86.com> (raw)
In-Reply-To: <1402666689-4971-1-git-send-email-mina86@mina86.com>
While loading g_mass_storage module, the following warning can
trigger:
WARNING: at drivers/usb/gadget/composite.c:
usb_composite_setup_continue: Unexpected call
Modules linked in: fat vfat minix nls_cp437 nls_iso8859_1 g_mass_storage
[<800179cc>] (unwind_backtrace+0x0/0x104) from [<80619608>] (dump_stack+0x20/0x24)
[<80619608>] (dump_stack+0x20/0x24) from [<80025100>] (warn_slowpath_common+0x64/0x74)
[<80025100>] (warn_slowpath_common+0x64/0x74) from [<800251cc>] (warn_slowpath_fmt+0x40/0x48)
[<800251cc>] (warn_slowpath_fmt+0x40/0x48) from [<7f047774>] (usb_composite_setup_continue+0xb4/0xbc [g_mass_storage])
[<7f047774>] (usb_composite_setup_continue+0xb4/0xbc [g_mass_storage]) from [<7f047ad4>] (handle_exception+0x358/0x3e4 [g_mass_storage])
[<7f047ad4>] (handle_exception+0x358/0x3e4 [g_mass_storage]) from [<7f048080>] (fsg_main_thread+0x520/0x157c [g_mass_storage])
[<7f048080>] (fsg_main_thread+0x520/0x157c [g_mass_storage]) from [<8004bc90>] (kthread+0x98/0x9c)
[<8004bc90>] (kthread+0x98/0x9c) from [<8000faec>] (kernel_thread_exit+0x0/0x8)
The root cause is that the existing code fails to take into account
the possibility that common->new_fsg can change while
do_set_interface() is running, because the spinlock does not protect
it.
Change the code so that the common->new_fsg field is protected by the
common->lock spin lock.
Reported-by: Yang Wei <Wei.Yang@windriver.com>
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
---
drivers/usb/gadget/f_mass_storage.c | 54 +++++++++++++++++++++++--------------
1 file changed, 34 insertions(+), 20 deletions(-)
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index b963939..bd663c2 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -264,7 +264,7 @@ struct fsg_common {
/* filesem protects: backing files in use */
struct rw_semaphore filesem;
- /* lock protects: state, all the req_busy's */
+ /* lock protects: state, all the req_busy's, and new_fsg */
spinlock_t lock;
struct usb_ep *ep0; /* Copy of gadget->ep0 */
@@ -407,23 +407,39 @@ static void wakeup_thread(struct fsg_common *common)
wake_up_process(common->thread_task);
}
-static void raise_exception(struct fsg_common *common, enum fsg_state new_state)
+static void __raise_exception(struct fsg_common *common,
+ enum fsg_state new_state)
{
- unsigned long flags;
-
/*
* Do nothing if a higher-priority exception is already in progress.
* If a lower-or-equal priority exception is in progress, preempt it
* and notify the main thread by sending it a signal.
*/
+ if (common->state > new_state)
+ return;
+
+ common->exception_req_tag = common->ep0_req_tag;
+ common->state = new_state;
+ if (common->thread_task)
+ send_sig_info(SIGUSR1, SEND_SIG_FORCED, common->thread_task);
+}
+
+static void raise_exception(struct fsg_common *common, enum fsg_state new_state)
+{
+ unsigned long flags;
spin_lock_irqsave(&common->lock, flags);
- if (common->state <= new_state) {
- common->exception_req_tag = common->ep0_req_tag;
- common->state = new_state;
- if (common->thread_task)
- send_sig_info(SIGUSR1, SEND_SIG_FORCED,
- common->thread_task);
- }
+ __raise_exception(common, new_state);
+ spin_unlock_irqrestore(&common->lock, flags);
+}
+
+static void raise_config_change_exception(struct fsg_common *common,
+ struct fsg_dev *new_fsg)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&common->lock, flags);
+ common->new_fsg = new_fsg;
+ __raise_exception(common, FSG_STATE_CONFIG_CHANGE);
spin_unlock_irqrestore(&common->lock, flags);
}
@@ -2320,16 +2336,14 @@ reset:
static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
{
struct fsg_dev *fsg = fsg_from_func(f);
- fsg->common->new_fsg = fsg;
- raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+ raise_config_change_exception(fsg->common, fsg);
return USB_GADGET_DELAYED_STATUS;
}
static void fsg_disable(struct usb_function *f)
{
struct fsg_dev *fsg = fsg_from_func(f);
- fsg->common->new_fsg = NULL;
- raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+ raise_config_change_exception(fsg->common, NULL);
}
@@ -2342,6 +2356,7 @@ static void handle_exception(struct fsg_common *common)
struct fsg_buffhd *bh;
enum fsg_state old_state;
struct fsg_lun *curlun;
+ struct fsg_dev *new_fsg;
unsigned int exception_req_tag;
/*
@@ -2405,6 +2420,7 @@ static void handle_exception(struct fsg_common *common)
common->next_buffhd_to_drain = &common->buffhds[0];
exception_req_tag = common->exception_req_tag;
old_state = common->state;
+ new_fsg = common->new_fsg;
if (old_state == FSG_STATE_ABORT_BULK_OUT)
common->state = FSG_STATE_STATUS_PHASE;
@@ -2460,8 +2476,8 @@ static void handle_exception(struct fsg_common *common)
break;
case FSG_STATE_CONFIG_CHANGE:
- do_set_interface(common, common->new_fsg);
- if (common->new_fsg)
+ do_set_interface(common, new_fsg);
+ if (new_fsg)
usb_composite_setup_continue(common->cdev);
break;
@@ -3178,8 +3194,7 @@ static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
DBG(fsg, "unbind\n");
if (fsg->common->fsg == fsg) {
- fsg->common->new_fsg = NULL;
- raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+ raise_config_change_exception(fsg->common, NULL);
/* FIXME: make interruptible or killable somehow? */
wait_event(common->fsg_wait, common->fsg != fsg);
}
@@ -3665,4 +3680,3 @@ void fsg_config_from_params(struct fsg_config *cfg,
cfg->fsg_num_buffers = fsg_num_buffers;
}
EXPORT_SYMBOL_GPL(fsg_config_from_params);
-
--
2.0.0.526.g5318336
next prev parent reply other threads:[~2014-06-13 13:38 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-13 13:38 [PATCHv4 0/6] Various small USB fixes Michal Nazarewicz
2014-06-13 13:38 ` [PATCHv4 1/6] usb: gadget: f_fs: resurect usb_functionfs_descs_head structure Michal Nazarewicz
2014-06-13 13:38 ` [PATCHv4 2/6] tools: ffs-test: fix header values endianess Michal Nazarewicz
2014-06-13 13:38 ` [PATCHv4 3/6] usb: gadget: f_fs: add usb_functionfs_descs_head_v2 structure Michal Nazarewicz
2014-06-13 13:38 ` [PATCHv4 4/6] tools: ffs-test: convert to new descriptor format Michal Nazarewicz
2014-06-13 13:38 ` [PATCHv4 5/6] tools: ffs-test: add compatibility code for old kernels Michal Nazarewicz
2014-06-13 13:38 ` Michal Nazarewicz [this message]
2014-06-13 14:22 ` [PATCHv4 6/6] usb: gadget: f_mass_storage: Fix a warning while loading g_mass_storage Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402666689-4971-7-git-send-email-mina86@mina86.com \
--to=mina86@mina86.com \
--cc=Wei.Yang@windriver.com \
--cc=balbi@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®