From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
To: Lee Jones <lee.jones@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>,
Mark Brown <broonie@kernel.org>,
Mike Turquette <mturquette@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Alessandro Zummo <a.zummo@towertech.it>,
Kukjin Kim <kgene.kim@samsung.com>,
Doug Anderson <dianders@chromium.org>,
Olof Johansson <olof@lixom.net>,
Sjoerd Simons <sjoerd.simons@collabora.co.uk>,
Daniel Stone <daniels@collabora.com>,
Tomeu Vizoso <tomeu.vizoso@collabora.com>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Subject: [PATCH v4 00/14] Add Maxim 77802 PMIC support
Date: Wed, 25 Jun 2014 21:03:24 +0200 [thread overview]
Message-ID: <1403723019-6212-1-git-send-email-javier.martinez@collabora.co.uk> (raw)
MAX77802 is a PMIC that contains 10 high efficiency Buck regulators,
32 Low-dropout (LDO) regulators, two 32kHz buffered clock outputs,
a Real-Time-Clock (RTC) and a I2C interface to program the individual
regulators, clocks and the RTC.
This fourth version of the patch-set addresses several issues pointed
out by Mark Brown, Doug Anderson and Krzysztof Kozlowski The individual
changes are added on each patch change log.
This series are based on drivers added by Simon Glass to the Chrome OS
kernel and adds support for the Maxim 77802 Power Management IC, their
regulators, clocks, RTC and I2C interface.
NOTE: This version of the series model the real power scheme for Maxim
77802 regulators instead of a simplistic model like in older versions.
So these changes depend on patch:
"[PATCH v3] ARM: dts: Add cros_ec to exynos5420-peach-pit and exynos5800-peach-pi"
https://patchwork.kernel.org/patch/4411351/
which adds tps65090 support to Peach boards since regulators from this
PMIC supply power to a set of MAX77802 regulators.
The patch-set has been tested on both Daisy/Snow (max77686) and Peach
pit (max77802) Chromebooks and it's composed of the following patches:
Doug Anderson (1):
mfd: max77686: Allow the max77686 rtc to wakeup the system
Javier Martinez Canillas (13):
mfd: max77686: Convert to use regmap_irq
clk: max77686: Add DT include for MAX77686 PMIC clock
clk: max77686: Improve Maxim 77686 PMIC clocks binding
clk: Add generic driver for Maxim PMIC clocks
clk: max77686: Convert to the generic max clock driver
mfd: Add driver for Maxim 77802 Power Management IC
mfd: max77802: Add DT binding documentation
regmap: Add regmap_reg_copy function
regulator: Add driver for Maxim 77802 PMIC regulators
clk: Add driver for Maxim 77802 PMIC clocks
clk: max77802: Add DT binding documentation
rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock
ARM: dts: Add max77802 to exynos5420-peach-pit and exynos5800-peach-pi
.../devicetree/bindings/clock/maxim,max77686.txt | 15 +-
.../devicetree/bindings/clock/maxim,max77802.txt | 42 ++
Documentation/devicetree/bindings/mfd/max77802.txt | 97 +++
arch/arm/boot/dts/exynos5420-peach-pit.dts | 343 ++++++++++
arch/arm/boot/dts/exynos5800-peach-pi.dts | 343 ++++++++++
drivers/base/regmap/regmap.c | 34 +
drivers/clk/Kconfig | 11 +
drivers/clk/Makefile | 2 +
drivers/clk/clk-max-gen.c | 195 ++++++
drivers/clk/clk-max-gen.h | 32 +
drivers/clk/clk-max77686.c | 183 +-----
drivers/clk/clk-max77802.c | 99 +++
drivers/mfd/Kconfig | 15 +
drivers/mfd/Makefile | 3 +-
drivers/mfd/max77686-irq.c | 319 ----------
drivers/mfd/max77686.c | 97 ++-
drivers/mfd/max77802.c | 366 +++++++++++
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/max77802.c | 694 +++++++++++++++++++++
drivers/rtc/Kconfig | 10 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-max77686.c | 55 +-
drivers/rtc/rtc-max77802.c | 637 +++++++++++++++++++
include/dt-bindings/clock/maxim,max77686.h | 23 +
include/dt-bindings/clock/maxim,max77802.h | 22 +
include/linux/mfd/max77686-private.h | 28 +-
include/linux/mfd/max77686.h | 2 -
include/linux/mfd/max77802-private.h | 307 +++++++++
include/linux/mfd/max77802.h | 121 ++++
include/linux/regmap.h | 9 +
31 files changed, 3583 insertions(+), 532 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/maxim,max77802.txt
create mode 100644 Documentation/devicetree/bindings/mfd/max77802.txt
create mode 100644 drivers/clk/clk-max-gen.c
create mode 100644 drivers/clk/clk-max-gen.h
create mode 100644 drivers/clk/clk-max77802.c
delete mode 100644 drivers/mfd/max77686-irq.c
create mode 100644 drivers/mfd/max77802.c
create mode 100644 drivers/regulator/max77802.c
create mode 100644 drivers/rtc/rtc-max77802.c
create mode 100644 include/dt-bindings/clock/maxim,max77686.h
create mode 100644 include/dt-bindings/clock/maxim,max77802.h
create mode 100644 include/linux/mfd/max77802-private.h
create mode 100644 include/linux/mfd/max77802.h
--
2.0.0.rc2
next reply other threads:[~2014-06-25 19:04 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-25 19:03 Javier Martinez Canillas [this message]
2014-06-25 19:03 ` [PATCH v4 01/14] mfd: max77686: Convert to use regmap_irq Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 02/14] mfd: max77686: Allow the max77686 rtc to wakeup the system Javier Martinez Canillas
2014-06-26 9:03 ` Krzysztof Kozlowski
2014-06-25 19:03 ` [PATCH v4 03/14] clk: max77686: Add DT include for MAX77686 PMIC clock Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 04/14] clk: max77686: Improve Maxim 77686 PMIC clocks binding Javier Martinez Canillas
2014-06-25 19:54 ` Doug Anderson
2014-06-25 19:03 ` [PATCH v4 05/14] clk: Add generic driver for Maxim PMIC clocks Javier Martinez Canillas
2014-06-26 9:00 ` Krzysztof Kozlowski
2014-06-26 11:51 ` Yadwinder Singh Brar
2014-06-26 12:31 ` Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 06/14] clk: max77686: Convert to the generic max clock driver Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 07/14] mfd: Add driver for Maxim 77802 Power Management IC Javier Martinez Canillas
2014-06-26 9:31 ` Krzysztof Kozlowski
2014-06-26 11:13 ` Javier Martinez Canillas
2014-06-26 16:12 ` Doug Anderson
2014-06-26 16:18 ` Javier Martinez Canillas
2014-06-26 16:29 ` Doug Anderson
2014-06-26 16:36 ` Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 08/14] mfd: max77802: Add DT binding documentation Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 09/14] regmap: Add regmap_reg_copy function Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 10/14] regulator: Add driver for Maxim 77802 PMIC regulators Javier Martinez Canillas
2014-06-26 10:08 ` Krzysztof Kozlowski
2014-06-26 11:26 ` Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 11/14] clk: Add driver for Maxim 77802 PMIC clocks Javier Martinez Canillas
2014-06-26 10:40 ` Krzysztof Kozlowski
2014-06-25 19:03 ` [PATCH v4 12/14] clk: max77802: Add DT binding documentation Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 13/14] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 14/14] ARM: dts: Add max77802 to exynos5420-peach-pit and exynos5800-peach-pi Javier Martinez Canillas
2014-06-26 13:32 ` [PATCH v4 00/14] Add Maxim 77802 PMIC support Naveen Krishna Ch
2014-06-26 13:56 ` Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403723019-6212-1-git-send-email-javier.martinez@collabora.co.uk \
--to=javier.martinez@collabora.co.uk \
--cc=a.zummo@towertech.it \
--cc=broonie@kernel.org \
--cc=daniels@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=k.kozlowski@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=olof@lixom.net \
--cc=sameo@linux.intel.com \
--cc=sjoerd.simons@collabora.co.uk \
--cc=tomeu.vizoso@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®