From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
To: Lee Jones <lee.jones@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>,
Mark Brown <broonie@kernel.org>,
Mike Turquette <mturquette@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Alessandro Zummo <a.zummo@towertech.it>,
Kukjin Kim <kgene.kim@samsung.com>,
Doug Anderson <dianders@chromium.org>,
Olof Johansson <olof@lixom.net>,
Sjoerd Simons <sjoerd.simons@collabora.co.uk>,
Daniel Stone <daniels@collabora.com>,
Tomeu Vizoso <tomeu.vizoso@collabora.com>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Subject: [PATCH v4 09/14] regmap: Add regmap_reg_copy function
Date: Wed, 25 Jun 2014 21:03:33 +0200 [thread overview]
Message-ID: <1403723019-6212-10-git-send-email-javier.martinez@collabora.co.uk> (raw)
In-Reply-To: <1403723019-6212-1-git-send-email-javier.martinez@collabora.co.uk>
Some device drivers using the register map API need to copy the
value from one register to another. Even though it can be done
with a combination of regmap_read() and regmap_write(), it is
better to have a function to avoid code duplication and also it
sanity check and do it atomically by holding the regmap lock.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---
Changes since v3: None
drivers/base/regmap/regmap.c | 34 ++++++++++++++++++++++++++++++++++
include/linux/regmap.h | 9 +++++++++
2 files changed, 43 insertions(+)
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 74d8c06..a2e0b04 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -2555,6 +2555,40 @@ int regmap_parse_val(struct regmap *map, const void *buf,
}
EXPORT_SYMBOL_GPL(regmap_parse_val);
+/**
+ * regmap_reg_copy(): Copy a value from a single register to another one
+ *
+ * @map: Register map to operate on
+ * @dest: Register to copy the value to
+ * @src: Register to copy the value from
+ *
+ * A value of zero will be returned on success, a negative errno will
+ * be returned in error cases.
+ */
+int regmap_reg_copy(struct regmap *map, unsigned int dest, unsigned int src)
+{
+ int val;
+ int ret = 0;
+
+ if (dest == src)
+ return ret;
+
+ if (dest % map->reg_stride ||
+ src % map->reg_stride)
+ return -EINVAL;
+
+ map->lock(map->lock_arg);
+
+ ret = _regmap_read(map, src, &val);
+ if (!ret)
+ ret = _regmap_write(map, dest, val);
+
+ map->unlock(map->lock_arg);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regmap_reg_copy);
+
static int __init regmap_initcall(void)
{
regmap_debugfs_initcall();
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 7b0e4b4..116c22b 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -445,6 +445,8 @@ int regmap_register_patch(struct regmap *map, const struct reg_default *regs,
int regmap_parse_val(struct regmap *map, const void *buf,
unsigned int *val);
+int regmap_reg_copy(struct regmap *map, unsigned int dest, unsigned int src);
+
static inline bool regmap_reg_in_range(unsigned int reg,
const struct regmap_range *range)
{
@@ -723,6 +725,13 @@ static inline int regmap_parse_val(struct regmap *map, const void *buf,
return -EINVAL;
}
+static inline int regmap_reg_copy(struct regmap *map, unsigned int dest,
+ unsigned int src)
+{
+ WARN_ONCE(1, "regmap API is disabled");
+ return -EINVAL;
+}
+
static inline struct regmap *dev_get_regmap(struct device *dev,
const char *name)
{
--
2.0.0.rc2
next prev parent reply other threads:[~2014-06-25 19:04 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-25 19:03 [PATCH v4 00/14] Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 01/14] mfd: max77686: Convert to use regmap_irq Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 02/14] mfd: max77686: Allow the max77686 rtc to wakeup the system Javier Martinez Canillas
2014-06-26 9:03 ` Krzysztof Kozlowski
2014-06-25 19:03 ` [PATCH v4 03/14] clk: max77686: Add DT include for MAX77686 PMIC clock Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 04/14] clk: max77686: Improve Maxim 77686 PMIC clocks binding Javier Martinez Canillas
2014-06-25 19:54 ` Doug Anderson
2014-06-25 19:03 ` [PATCH v4 05/14] clk: Add generic driver for Maxim PMIC clocks Javier Martinez Canillas
2014-06-26 9:00 ` Krzysztof Kozlowski
2014-06-26 11:51 ` Yadwinder Singh Brar
2014-06-26 12:31 ` Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 06/14] clk: max77686: Convert to the generic max clock driver Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 07/14] mfd: Add driver for Maxim 77802 Power Management IC Javier Martinez Canillas
2014-06-26 9:31 ` Krzysztof Kozlowski
2014-06-26 11:13 ` Javier Martinez Canillas
2014-06-26 16:12 ` Doug Anderson
2014-06-26 16:18 ` Javier Martinez Canillas
2014-06-26 16:29 ` Doug Anderson
2014-06-26 16:36 ` Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 08/14] mfd: max77802: Add DT binding documentation Javier Martinez Canillas
2014-06-25 19:03 ` Javier Martinez Canillas [this message]
2014-06-25 19:03 ` [PATCH v4 10/14] regulator: Add driver for Maxim 77802 PMIC regulators Javier Martinez Canillas
2014-06-26 10:08 ` Krzysztof Kozlowski
2014-06-26 11:26 ` Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 11/14] clk: Add driver for Maxim 77802 PMIC clocks Javier Martinez Canillas
2014-06-26 10:40 ` Krzysztof Kozlowski
2014-06-25 19:03 ` [PATCH v4 12/14] clk: max77802: Add DT binding documentation Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 13/14] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 14/14] ARM: dts: Add max77802 to exynos5420-peach-pit and exynos5800-peach-pi Javier Martinez Canillas
2014-06-26 13:32 ` [PATCH v4 00/14] Add Maxim 77802 PMIC support Naveen Krishna Ch
2014-06-26 13:56 ` Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403723019-6212-10-git-send-email-javier.martinez@collabora.co.uk \
--to=javier.martinez@collabora.co.uk \
--cc=a.zummo@towertech.it \
--cc=broonie@kernel.org \
--cc=daniels@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=k.kozlowski@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=olof@lixom.net \
--cc=sameo@linux.intel.com \
--cc=sjoerd.simons@collabora.co.uk \
--cc=tomeu.vizoso@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®