From: Philipp Reisner <philipp.reisner@linbit.com>
To: linux-kernel@vger.kernel.org, Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Subject: [PATCH 15/18] drbd: close race when detaching from disk
Date: Mon, 30 Jun 2014 17:53:04 +0200 [thread overview]
Message-ID: <1404143587-24344-16-git-send-email-philipp.reisner@linbit.com> (raw)
In-Reply-To: <1404143587-24344-1-git-send-email-philipp.reisner@linbit.com>
From: Lars Ellenberg <lars.ellenberg@linbit.com>
BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
IP: bd_release+0x21/0x70
Process drbd_w_t7146
Call Trace:
close_bdev_exclusive
drbd_free_ldev [drbd]
drbd_ldev_destroy [drbd]
w_after_state_ch [drbd]
Race probably went like this:
state.disk = D_FAILED
... first one to hit zero during D_FAILED:
put_ldev() /* ----------------> 0 */
i = atomic_dec_return()
if (i == 0)
if (state.disk == D_FAILED)
schedule_work(go_diskless)
/* 1 <------ */ get_ldev_if_state()
go_diskless()
do_some_pre_cleanup() corresponding put_ldev():
force_state(D_DISKLESS) /* 0 <------ */ i = atomic_dec_return()
if (i == 0)
atomic_inc() /* ---------> 1 */
state.disk = D_DISKLESS
schedule_work(after_state_ch) /* execution pre-empted by IRQ ? */
after_state_ch()
put_ldev()
i = atomic_dec_return() /* 0 */
if (i == 0)
if (state.disk == D_DISKLESS) if (state.disk == D_DISKLESS)
drbd_ldev_destroy() drbd_ldev_destroy();
Trying to fix this by checking the disk state *before* the
atomic_dec_return(), which implies memory barriers, and by inserting
extra memory barriers around the state assignment in __drbd_set_state().
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
---
drivers/block/drbd/drbd_int.h | 9 +++++++--
drivers/block/drbd/drbd_state.c | 11 +++++++----
2 files changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index a16f9ae..a0ffc19 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -1946,6 +1946,11 @@ static inline bool is_sync_state(enum drbd_conns connection_state)
static inline void put_ldev(struct drbd_device *device)
{
+ enum drbd_disk_state ds = device->state.disk;
+ /* We must check the state *before* the atomic_dec becomes visible,
+ * or we have a theoretical race where someone hitting zero,
+ * while state still D_FAILED, will then see D_DISKLESS in the
+ * condition below and calling into destroy, where he must not, yet. */
int i = atomic_dec_return(&device->local_cnt);
/* This may be called from some endio handler,
@@ -1954,10 +1959,10 @@ static inline void put_ldev(struct drbd_device *device)
__release(local);
D_ASSERT(device, i >= 0);
if (i == 0) {
- if (device->state.disk == D_DISKLESS)
+ if (ds == D_DISKLESS)
/* even internal references gone, safe to destroy */
drbd_ldev_destroy(device);
- if (device->state.disk == D_FAILED) {
+ if (ds == D_FAILED) {
/* all application IO references gone. */
if (!test_and_set_bit(GO_DISKLESS, &device->flags))
drbd_queue_work(&first_peer_device(device)->connection->sender_work,
diff --git a/drivers/block/drbd/drbd_state.c b/drivers/block/drbd/drbd_state.c
index 1bddd6c..6629f46 100644
--- a/drivers/block/drbd/drbd_state.c
+++ b/drivers/block/drbd/drbd_state.c
@@ -958,7 +958,6 @@ __drbd_set_state(struct drbd_device *device, union drbd_state ns,
enum drbd_state_rv rv = SS_SUCCESS;
enum sanitize_state_warnings ssw;
struct after_state_chg_work *ascw;
- bool did_remote, should_do_remote;
os = drbd_read_state(device);
@@ -1010,18 +1009,22 @@ __drbd_set_state(struct drbd_device *device, union drbd_state ns,
(os.disk != D_DISKLESS && ns.disk == D_DISKLESS))
atomic_inc(&device->local_cnt);
- did_remote = drbd_should_do_remote(device->state);
if (!is_sync_state(os.conn) && is_sync_state(ns.conn))
clear_bit(RS_DONE, &device->flags);
+ /* changes to local_cnt and device flags should be visible before
+ * changes to state, which again should be visible before anything else
+ * depending on that change happens. */
+ smp_wmb();
device->state.i = ns.i;
- should_do_remote = drbd_should_do_remote(device->state);
device->resource->susp = ns.susp;
device->resource->susp_nod = ns.susp_nod;
device->resource->susp_fen = ns.susp_fen;
+ smp_wmb();
/* put replicated vs not-replicated requests in seperate epochs */
- if (did_remote != should_do_remote)
+ if (drbd_should_do_remote((union drbd_dev_state)os.i) !=
+ drbd_should_do_remote((union drbd_dev_state)ns.i))
start_new_tl_epoch(connection);
if (os.disk == D_ATTACHING && ns.disk >= D_NEGOTIATING)
--
1.9.1
next prev parent reply other threads:[~2014-06-30 15:54 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-30 15:52 [PATCH 00/18] RFC DRBD fixes Philipp Reisner
2014-06-30 15:52 ` [PATCH 01/18] drbd: Move write_ordering from connection to resource Philipp Reisner
2014-06-30 15:52 ` [PATCH 02/18] drbd: device->ldev is not guaranteed on an D_ATTACHING disk Philipp Reisner
2014-06-30 15:52 ` [PATCH 03/18] drbd: rename drbd_free_bc() to drbd_free_ldev() Philipp Reisner
2014-06-30 15:52 ` [PATCH 04/18] drbd: reduce number of spinlock drop/re-aquire cycles Philipp Reisner
2014-06-30 15:52 ` [PATCH 05/18] drbd: refactor use of first_peer_device() Philipp Reisner
2014-06-30 15:52 ` [PATCH 06/18] drbd: allow write-ordering policy to be bumped up again Philipp Reisner
2014-06-30 15:52 ` [PATCH 07/18] drbd: get rid of atomic update on disk bitmap works Philipp Reisner
2014-06-30 15:52 ` [PATCH 08/18] drbd: fix a race stopping the worker thread Philipp Reisner
2014-06-30 15:52 ` [PATCH 09/18] drbd: fix resync finished detection Philipp Reisner
2014-06-30 15:52 ` [PATCH 10/18] drbd: stop the meta data sync timer before open coded meta data sync Philipp Reisner
2014-06-30 15:53 ` [PATCH 11/18] drbd: re-add lost conf_mutex protection in drbd_set_role Philipp Reisner
2014-06-30 15:53 ` [PATCH 12/18] drbd: trigger tcp_push_pending_frames() for PING and PING_ACK Philipp Reisner
2014-06-30 15:53 ` [PATCH 13/18] drbd: move set_disk_ro() to after we persisted the new role Philipp Reisner
2014-06-30 15:53 ` [PATCH 14/18] drbd: explicitly submit meta data requests with REQ_NOIDLE Philipp Reisner
2014-06-30 15:53 ` Philipp Reisner [this message]
2014-06-30 15:53 ` [PATCH 16/18] drbd: make sure disk cleanup happens in worker context Philipp Reisner
2014-06-30 15:53 ` [PATCH 17/18] drbd: use drbd_device_post_work() in more places Philipp Reisner
2014-06-30 15:53 ` [PATCH 18/18] drbd: get rid of drbd_queue_work_front Philipp Reisner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404143587-24344-16-git-send-email-philipp.reisner@linbit.com \
--to=philipp.reisner@linbit.com \
--cc=axboe@kernel.dk \
--cc=drbd-dev@lists.linbit.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®