mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Philipp Reisner <philipp.reisner@linbit.com>
To: linux-kernel@vger.kernel.org, Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Subject: [PATCH 17/18] drbd: use drbd_device_post_work() in more places
Date: Mon, 30 Jun 2014 17:53:06 +0200	[thread overview]
Message-ID: <1404143587-24344-18-git-send-email-philipp.reisner@linbit.com> (raw)
In-Reply-To: <1404143587-24344-1-git-send-email-philipp.reisner@linbit.com>

From: Lars Ellenberg <lars.ellenberg@linbit.com>

This replaces the md_sync_work member of struct drbd_device
by a new MD_SYNC "work bit" in device->flags.

This replaces the resync_start_work member of struct drbd_device
by a new RS_START "work bit" in device->flags.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
---
 drivers/block/drbd/drbd_int.h    | 16 ++--------------
 drivers/block/drbd/drbd_main.c   | 25 +------------------------
 drivers/block/drbd/drbd_worker.c | 27 +++++++++++++++++----------
 3 files changed, 20 insertions(+), 48 deletions(-)

diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index 5768260..3c701b0 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -457,6 +457,8 @@ enum {
 	/* to be used in drbd_device_post_work() */
 	GO_DISKLESS,		/* tell worker to schedule cleanup before detach */
 	DESTROY_DISK,		/* tell worker to close backing devices and destroy related structures. */
+	MD_SYNC,		/* tell worker to call drbd_md_sync() */
+	RS_START,		/* tell worker to start resync/OV */
 	RS_PROGRESS,		/* tell worker that resync made significant progress */
 	RS_DONE,		/* tell worker that resync is done */
 };
@@ -709,18 +711,10 @@ struct drbd_device {
 	unsigned long last_reattach_jif;
 	struct drbd_work resync_work;
 	struct drbd_work unplug_work;
-	struct drbd_work md_sync_work;
-	struct drbd_work start_resync_work;
 	struct timer_list resync_timer;
 	struct timer_list md_sync_timer;
 	struct timer_list start_resync_timer;
 	struct timer_list request_timer;
-#ifdef DRBD_DEBUG_MD_SYNC
-	struct {
-		unsigned int line;
-		const char* func;
-	} last_md_mark_dirty;
-#endif
 
 	/* Used after attach while negotiating new disk state. */
 	union drbd_state new_state_tmp;
@@ -977,13 +971,7 @@ extern void __drbd_uuid_set(struct drbd_device *device, int idx, u64 val) __must
 extern void drbd_md_set_flag(struct drbd_device *device, int flags) __must_hold(local);
 extern void drbd_md_clear_flag(struct drbd_device *device, int flags)__must_hold(local);
 extern int drbd_md_test_flag(struct drbd_backing_dev *, int);
-#ifndef DRBD_DEBUG_MD_SYNC
 extern void drbd_md_mark_dirty(struct drbd_device *device);
-#else
-#define drbd_md_mark_dirty(m)	drbd_md_mark_dirty_(m, __LINE__ , __func__ )
-extern void drbd_md_mark_dirty_(struct drbd_device *device,
-		unsigned int line, const char *func);
-#endif
 extern void drbd_queue_bitmap_io(struct drbd_device *device,
 				 int (*io_fn)(struct drbd_device *),
 				 void (*done)(struct drbd_device *, int),
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 0cf6094..ed35d52 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -60,7 +60,6 @@
 static DEFINE_MUTEX(drbd_main_mutex);
 static int drbd_open(struct block_device *bdev, fmode_t mode);
 static void drbd_release(struct gendisk *gd, fmode_t mode);
-static int w_md_sync(struct drbd_work *w, int unused);
 static void md_sync_timer_fn(unsigned long data);
 static int w_bitmap_io(struct drbd_work *w, int unused);
 
@@ -1928,15 +1927,11 @@ void drbd_init_set_defaults(struct drbd_device *device)
 	INIT_LIST_HEAD(&device->resync_reads);
 	INIT_LIST_HEAD(&device->resync_work.list);
 	INIT_LIST_HEAD(&device->unplug_work.list);
-	INIT_LIST_HEAD(&device->md_sync_work.list);
-	INIT_LIST_HEAD(&device->start_resync_work.list);
 	INIT_LIST_HEAD(&device->bm_io_work.w.list);
 
 	device->resync_work.cb  = w_resync_timer;
 	device->unplug_work.cb  = w_send_write_hint;
-	device->md_sync_work.cb = w_md_sync;
 	device->bm_io_work.w.cb = w_bitmap_io;
-	device->start_resync_work.cb = w_start_resync;
 
 	init_timer(&device->resync_timer);
 	init_timer(&device->md_sync_timer);
@@ -3623,25 +3618,7 @@ int drbd_md_test_flag(struct drbd_backing_dev *bdev, int flag)
 static void md_sync_timer_fn(unsigned long data)
 {
 	struct drbd_device *device = (struct drbd_device *) data;
-
-	/* must not double-queue! */
-	if (list_empty(&device->md_sync_work.list))
-		drbd_queue_work_front(&first_peer_device(device)->connection->sender_work,
-				      &device->md_sync_work);
-}
-
-static int w_md_sync(struct drbd_work *w, int unused)
-{
-	struct drbd_device *device =
-		container_of(w, struct drbd_device, md_sync_work);
-
-	drbd_warn(device, "md_sync_timer expired! Worker calls drbd_md_sync().\n");
-#ifdef DEBUG
-	drbd_warn(device, "last md_mark_dirty: %s:%u\n",
-		device->last_md_mark_dirty.func, device->last_md_mark_dirty.line);
-#endif
-	drbd_md_sync(device);
-	return 0;
+	drbd_device_post_work(device, MD_SYNC);
 }
 
 const char *cmdname(enum drbd_packet cmd)
diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c
index 00bf490..a4310fd 100644
--- a/drivers/block/drbd/drbd_worker.c
+++ b/drivers/block/drbd/drbd_worker.c
@@ -1606,26 +1606,20 @@ void drbd_rs_controller_reset(struct drbd_device *device)
 void start_resync_timer_fn(unsigned long data)
 {
 	struct drbd_device *device = (struct drbd_device *) data;
-
-	drbd_queue_work(&first_peer_device(device)->connection->sender_work,
-			&device->start_resync_work);
+	drbd_device_post_work(device, RS_START);
 }
 
-int w_start_resync(struct drbd_work *w, int cancel)
+static void do_start_resync(struct drbd_device *device)
 {
-	struct drbd_device *device =
-		container_of(w, struct drbd_device, start_resync_work);
-
 	if (atomic_read(&device->unacked_cnt) || atomic_read(&device->rs_pending_cnt)) {
-		drbd_warn(device, "w_start_resync later...\n");
+		drbd_warn(device, "postponing start_resync ...\n");
 		device->start_resync_timer.expires = jiffies + HZ/10;
 		add_timer(&device->start_resync_timer);
-		return 0;
+		return;
 	}
 
 	drbd_start_resync(device, C_SYNC_SOURCE);
 	clear_bit(AHEAD_TO_SYNC_SOURCE, &device->flags);
-	return 0;
 }
 
 /**
@@ -1882,9 +1876,18 @@ static void go_diskless(struct drbd_device *device)
 	drbd_force_state(device, NS(disk, D_DISKLESS));
 }
 
+static int do_md_sync(struct drbd_device *device)
+{
+	drbd_warn(device, "md_sync_timer expired! Worker calls drbd_md_sync().\n");
+	drbd_md_sync(device);
+	return 0;
+}
+
 #define WORK_PENDING(work_bit, todo)	(todo & (1UL << work_bit))
 static void do_device_work(struct drbd_device *device, const unsigned long todo)
 {
+	if (WORK_PENDING(MD_SYNC, todo))
+		do_md_sync(device);
 	if (WORK_PENDING(RS_DONE, todo) ||
 	    WORK_PENDING(RS_PROGRESS, todo))
 		update_on_disk_bitmap(device, WORK_PENDING(RS_DONE, todo));
@@ -1892,11 +1895,15 @@ static void do_device_work(struct drbd_device *device, const unsigned long todo)
 		go_diskless(device);
 	if (WORK_PENDING(DESTROY_DISK, todo))
 		drbd_ldev_destroy(device);
+	if (WORK_PENDING(RS_START, todo))
+		do_start_resync(device);
 }
 
 #define DRBD_DEVICE_WORK_MASK	\
 	((1UL << GO_DISKLESS)	\
 	|(1UL << DESTROY_DISK)	\
+	|(1UL << MD_SYNC)	\
+	|(1UL << RS_START)	\
 	|(1UL << RS_PROGRESS)	\
 	|(1UL << RS_DONE)	\
 	)
-- 
1.9.1


  parent reply	other threads:[~2014-06-30 15:54 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-30 15:52 [PATCH 00/18] RFC DRBD fixes Philipp Reisner
2014-06-30 15:52 ` [PATCH 01/18] drbd: Move write_ordering from connection to resource Philipp Reisner
2014-06-30 15:52 ` [PATCH 02/18] drbd: device->ldev is not guaranteed on an D_ATTACHING disk Philipp Reisner
2014-06-30 15:52 ` [PATCH 03/18] drbd: rename drbd_free_bc() to drbd_free_ldev() Philipp Reisner
2014-06-30 15:52 ` [PATCH 04/18] drbd: reduce number of spinlock drop/re-aquire cycles Philipp Reisner
2014-06-30 15:52 ` [PATCH 05/18] drbd: refactor use of first_peer_device() Philipp Reisner
2014-06-30 15:52 ` [PATCH 06/18] drbd: allow write-ordering policy to be bumped up again Philipp Reisner
2014-06-30 15:52 ` [PATCH 07/18] drbd: get rid of atomic update on disk bitmap works Philipp Reisner
2014-06-30 15:52 ` [PATCH 08/18] drbd: fix a race stopping the worker thread Philipp Reisner
2014-06-30 15:52 ` [PATCH 09/18] drbd: fix resync finished detection Philipp Reisner
2014-06-30 15:52 ` [PATCH 10/18] drbd: stop the meta data sync timer before open coded meta data sync Philipp Reisner
2014-06-30 15:53 ` [PATCH 11/18] drbd: re-add lost conf_mutex protection in drbd_set_role Philipp Reisner
2014-06-30 15:53 ` [PATCH 12/18] drbd: trigger tcp_push_pending_frames() for PING and PING_ACK Philipp Reisner
2014-06-30 15:53 ` [PATCH 13/18] drbd: move set_disk_ro() to after we persisted the new role Philipp Reisner
2014-06-30 15:53 ` [PATCH 14/18] drbd: explicitly submit meta data requests with REQ_NOIDLE Philipp Reisner
2014-06-30 15:53 ` [PATCH 15/18] drbd: close race when detaching from disk Philipp Reisner
2014-06-30 15:53 ` [PATCH 16/18] drbd: make sure disk cleanup happens in worker context Philipp Reisner
2014-06-30 15:53 ` Philipp Reisner [this message]
2014-06-30 15:53 ` [PATCH 18/18] drbd: get rid of drbd_queue_work_front Philipp Reisner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1404143587-24344-18-git-send-email-philipp.reisner@linbit.com \
    --to=philipp.reisner@linbit.com \
    --cc=axboe@kernel.dk \
    --cc=drbd-dev@lists.linbit.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®