From: Oded Gabbay <oded.gabbay@gmail.com>
To: David Airlie <airlied@linux.ie>,
Alex Deucher <alexander.deucher@amd.com>,
Jerome Glisse <j.glisse@gmail.com>
Cc: linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
"John Bridgman" <John.Bridgman@amd.com>,
"Andrew Lewycky" <Andrew.Lewycky@amd.com>,
"Joerg Roedel" <joro@8bytes.org>,
"Oded Gabbay" <oded.gabbay@amd.com>,
"Christian König" <christian.koenig@amd.com>
Subject: [PATCH 23/83] drm/radeon/cik: Don't touch int of pipes 1-7
Date: Fri, 11 Jul 2014 00:50:23 +0300 [thread overview]
Message-ID: <1405029027-6085-22-git-send-email-oded.gabbay@amd.com> (raw)
In-Reply-To: <1405029027-6085-1-git-send-email-oded.gabbay@amd.com>
HSA radeon driver (kfd) should set interrupts for pipes 1-7.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
---
drivers/gpu/drm/radeon/cik.c | 71 +-------------------------------------------
1 file changed, 1 insertion(+), 70 deletions(-)
diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
index b1c50f4..803d0cb 100644
--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -7272,8 +7272,7 @@ static int cik_irq_init(struct radeon_device *rdev)
int cik_irq_set(struct radeon_device *rdev)
{
u32 cp_int_cntl;
- u32 cp_m1p0, cp_m1p1, cp_m1p2, cp_m1p3;
- u32 cp_m2p0, cp_m2p1, cp_m2p2, cp_m2p3;
+ u32 cp_m1p0;
u32 crtc1 = 0, crtc2 = 0, crtc3 = 0, crtc4 = 0, crtc5 = 0, crtc6 = 0;
u32 hpd1, hpd2, hpd3, hpd4, hpd5, hpd6;
u32 grbm_int_cntl = 0;
@@ -7307,13 +7306,6 @@ int cik_irq_set(struct radeon_device *rdev)
dma_cntl1 = RREG32(SDMA0_CNTL + SDMA1_REGISTER_OFFSET) & ~TRAP_ENABLE;
cp_m1p0 = RREG32(CP_ME1_PIPE0_INT_CNTL) & ~TIME_STAMP_INT_ENABLE;
- cp_m1p1 = RREG32(CP_ME1_PIPE1_INT_CNTL) & ~TIME_STAMP_INT_ENABLE;
- cp_m1p2 = RREG32(CP_ME1_PIPE2_INT_CNTL) & ~TIME_STAMP_INT_ENABLE;
- cp_m1p3 = RREG32(CP_ME1_PIPE3_INT_CNTL) & ~TIME_STAMP_INT_ENABLE;
- cp_m2p0 = RREG32(CP_ME2_PIPE0_INT_CNTL) & ~TIME_STAMP_INT_ENABLE;
- cp_m2p1 = RREG32(CP_ME2_PIPE1_INT_CNTL) & ~TIME_STAMP_INT_ENABLE;
- cp_m2p2 = RREG32(CP_ME2_PIPE2_INT_CNTL) & ~TIME_STAMP_INT_ENABLE;
- cp_m2p3 = RREG32(CP_ME2_PIPE3_INT_CNTL) & ~TIME_STAMP_INT_ENABLE;
if (rdev->flags & RADEON_IS_IGP)
thermal_int = RREG32_SMC(CG_THERMAL_INT_CTRL) &
@@ -7335,33 +7327,6 @@ int cik_irq_set(struct radeon_device *rdev)
case 0:
cp_m1p0 |= TIME_STAMP_INT_ENABLE;
break;
- case 1:
- cp_m1p1 |= TIME_STAMP_INT_ENABLE;
- break;
- case 2:
- cp_m1p2 |= TIME_STAMP_INT_ENABLE;
- break;
- case 3:
- cp_m1p2 |= TIME_STAMP_INT_ENABLE;
- break;
- default:
- DRM_DEBUG("si_irq_set: sw int cp1 invalid pipe %d\n", ring->pipe);
- break;
- }
- } else if (ring->me == 2) {
- switch (ring->pipe) {
- case 0:
- cp_m2p0 |= TIME_STAMP_INT_ENABLE;
- break;
- case 1:
- cp_m2p1 |= TIME_STAMP_INT_ENABLE;
- break;
- case 2:
- cp_m2p2 |= TIME_STAMP_INT_ENABLE;
- break;
- case 3:
- cp_m2p2 |= TIME_STAMP_INT_ENABLE;
- break;
default:
DRM_DEBUG("si_irq_set: sw int cp1 invalid pipe %d\n", ring->pipe);
break;
@@ -7378,33 +7343,6 @@ int cik_irq_set(struct radeon_device *rdev)
case 0:
cp_m1p0 |= TIME_STAMP_INT_ENABLE;
break;
- case 1:
- cp_m1p1 |= TIME_STAMP_INT_ENABLE;
- break;
- case 2:
- cp_m1p2 |= TIME_STAMP_INT_ENABLE;
- break;
- case 3:
- cp_m1p2 |= TIME_STAMP_INT_ENABLE;
- break;
- default:
- DRM_DEBUG("si_irq_set: sw int cp2 invalid pipe %d\n", ring->pipe);
- break;
- }
- } else if (ring->me == 2) {
- switch (ring->pipe) {
- case 0:
- cp_m2p0 |= TIME_STAMP_INT_ENABLE;
- break;
- case 1:
- cp_m2p1 |= TIME_STAMP_INT_ENABLE;
- break;
- case 2:
- cp_m2p2 |= TIME_STAMP_INT_ENABLE;
- break;
- case 3:
- cp_m2p2 |= TIME_STAMP_INT_ENABLE;
- break;
default:
DRM_DEBUG("si_irq_set: sw int cp2 invalid pipe %d\n", ring->pipe);
break;
@@ -7487,13 +7425,6 @@ int cik_irq_set(struct radeon_device *rdev)
WREG32(SDMA0_CNTL + SDMA1_REGISTER_OFFSET, dma_cntl1);
WREG32(CP_ME1_PIPE0_INT_CNTL, cp_m1p0);
- WREG32(CP_ME1_PIPE1_INT_CNTL, cp_m1p1);
- WREG32(CP_ME1_PIPE2_INT_CNTL, cp_m1p2);
- WREG32(CP_ME1_PIPE3_INT_CNTL, cp_m1p3);
- WREG32(CP_ME2_PIPE0_INT_CNTL, cp_m2p0);
- WREG32(CP_ME2_PIPE1_INT_CNTL, cp_m2p1);
- WREG32(CP_ME2_PIPE2_INT_CNTL, cp_m2p2);
- WREG32(CP_ME2_PIPE3_INT_CNTL, cp_m2p3);
WREG32(GRBM_INT_CNTL, grbm_int_cntl);
--
1.9.1
next prev parent reply other threads:[~2014-07-10 21:53 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-10 21:50 [PATCH 02/83] drm/radeon: reduce number of free VMIDs and pipes in KV Oded Gabbay
2014-07-10 21:50 ` [PATCH 03/83] drm/radeon: Report doorbell configuration to kfd Oded Gabbay
2014-07-11 16:16 ` Jerome Glisse
2014-07-10 21:50 ` [PATCH 04/83] drm/radeon: Add radeon <--> kfd interface Oded Gabbay
2014-07-10 22:38 ` Joe Perches
2014-07-11 16:24 ` Jerome Glisse
2014-07-17 11:55 ` Oded Gabbay
2014-07-10 21:50 ` [PATCH 05/83] drm/radeon: Add kfd-->kgd interface to get virtual ram size Oded Gabbay
2014-07-11 16:27 ` Jerome Glisse
2014-07-10 21:50 ` [PATCH 06/83] drm/radeon: Add kfd-->kgd interfaces of memory allocation/mapping Oded Gabbay
2014-07-11 16:32 ` Jerome Glisse
2014-07-10 21:50 ` [PATCH 07/83] drm/radeon: Add kfd-->kgd interface of locking srbm_gfx_cntl register Oded Gabbay
2014-07-11 16:34 ` Jerome Glisse
2014-07-11 17:48 ` Bridgman, John
2014-07-12 0:36 ` Bridgman, John
2014-07-12 0:37 ` Bridgman, John
2014-07-10 21:50 ` [PATCH 08/83] drm/radeon: Add calls to initialize and finalize kfd from radeon Oded Gabbay
2014-07-11 16:36 ` Jerome Glisse
2014-07-17 11:57 ` Oded Gabbay
2014-07-17 12:29 ` Christian König
2014-07-17 12:30 ` Oded Gabbay
[not found] ` <53C7C555.8040402@amd.com>
2014-07-17 13:31 ` Daniel Vetter
2014-07-10 21:50 ` [PATCH 09/83] hsa/radeon: Add code base of hsa driver for AMD's GPUs Oded Gabbay
2014-07-11 17:04 ` Jerome Glisse
2014-07-11 17:28 ` Joe Perches
2014-07-17 11:51 ` Oded Gabbay
2014-07-11 17:40 ` Daniel Vetter
2014-07-11 18:02 ` Bridgman, John
2014-07-11 18:10 ` Jerome Glisse
2014-07-11 18:46 ` Bridgman, John
2014-07-11 18:51 ` Jerome Glisse
2014-07-11 18:56 ` Bridgman, John
2014-07-11 19:22 ` Jerome Glisse
2014-07-11 19:38 ` Joe Perches
2014-07-17 11:51 ` Oded Gabbay
2014-07-10 21:50 ` [PATCH 10/83] hsa/radeon: Add initialization and unmapping of doorbell aperture Oded Gabbay
2014-07-10 21:50 ` [PATCH 11/83] hsa/radeon: Add scheduler code Oded Gabbay
2014-07-11 18:25 ` Jerome Glisse
2014-07-17 11:57 ` Oded Gabbay
2014-07-10 21:50 ` [PATCH 12/83] hsa/radeon: Add kfd mmap handler Oded Gabbay
2014-07-11 18:47 ` Jerome Glisse
2014-07-10 21:50 ` [PATCH 13/83] hsa/radeon: Add 2 new IOCTL to kfd, CREATE_QUEUE and DESTROY_QUEUE Oded Gabbay
2014-07-11 19:19 ` Jerome Glisse
2014-07-11 21:01 ` Jerome Glisse
2014-07-11 21:42 ` Dave Airlie
2014-07-14 7:33 ` Gabbay, Oded
2014-07-10 21:50 ` [PATCH 14/83] hsa/radeon: Update MAINTAINERS and CREDITS files Oded Gabbay
2014-07-10 21:50 ` [PATCH 15/83] hsa/radeon: Add interrupt handling module Oded Gabbay
2014-07-11 19:57 ` Jerome Glisse
2014-07-10 21:50 ` [PATCH 16/83] hsa/radeon: Add the isr function of the KFD scehduler Oded Gabbay
2014-07-10 21:50 ` [PATCH 17/83] hsa/radeon: Handle deactivation of queues using interrupts Oded Gabbay
2014-07-10 21:50 ` [PATCH 18/83] hsa/radeon: Enable interrupts in KFD scheduler Oded Gabbay
2014-07-10 21:50 ` [PATCH 19/83] hsa/radeon: Enable/Disable KFD interrupt module Oded Gabbay
2014-07-10 21:50 ` [PATCH 20/83] hsa/radeon: Add interrupt callback function to kgd2kfd interface Oded Gabbay
2014-07-10 21:50 ` [PATCH 21/83] hsa/radeon: Add kgd-->kfd interfaces for suspend and resume Oded Gabbay
2014-07-10 21:50 ` [PATCH 22/83] drm/radeon: Add calls to suspend and resume of kfd driver Oded Gabbay
2014-07-10 21:50 ` Oded Gabbay [this message]
2014-07-10 21:50 ` [PATCH 24/83] drm/radeon/cik: Call kfd isr function Oded Gabbay
2014-07-10 21:50 ` [PATCH 25/83] hsa/radeon: fix the OEMID assignment in kfd_topology Oded Gabbay
2014-07-10 21:50 ` [PATCH 26/83] hsa/radeon: Make binding of process to device permanent Oded Gabbay
2014-07-10 21:50 ` [PATCH 27/83] hsa/radeon: Implement hsaKmtSetMemoryPolicy Oded Gabbay
2014-07-11 16:05 ` [PATCH 02/83] drm/radeon: reduce number of free VMIDs and pipes in KV Jerome Glisse
2014-07-11 16:18 ` Christian König
2014-07-11 16:22 ` Alex Deucher
2014-07-11 17:07 ` Bridgman, John
[not found] ` <CAL4m05UPDBrSOaHdyVSws9c3i=NPmSfVYQ=4emehyctN1+9r0g@mail.gmail.com>
2014-07-11 22:54 ` Bridgman, John
2014-07-12 9:00 ` Christian König
2014-07-14 7:31 ` Michel Dänzer
2014-07-14 7:38 ` Michel Dänzer
2014-07-14 7:58 ` Christian König
2014-07-17 11:47 ` Oded Gabbay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1405029027-6085-22-git-send-email-oded.gabbay@amd.com \
--to=oded.gabbay@gmail.com \
--cc=Andrew.Lewycky@amd.com \
--cc=John.Bridgman@amd.com \
--cc=airlied@linux.ie \
--cc=alexander.deucher@amd.com \
--cc=christian.koenig@amd.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=j.glisse@gmail.com \
--cc=joro@8bytes.org \
--cc=linux-kernel@vger.kernel.org \
--cc=oded.gabbay@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome