From: Nicholas Krause <xerofoify@gmail.com>
To: rth@twiddle.net
Cc: ink@jurassic.park.msu.ru, mattst88@gmail.com,
linux-alpha@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/4] alpha: Converse all space errors into tabs in mkbb.c
Date: Wed, 16 Jul 2014 00:13:59 -0400 [thread overview]
Message-ID: <1405484042-6879-1-git-send-email-xerofoify@gmail.com> (raw)
This patch fixes all the checkpatch errors I get when running it
on mkbb.c for spaces at beginning of lines. I converted then all
to tabs to fix these checkpatch warnings.
---
arch/alpha/boot/tools/mkbb.c | 124 +++++++++++++++++++++----------------------
1 file changed, 61 insertions(+), 63 deletions(-)
diff --git a/arch/alpha/boot/tools/mkbb.c b/arch/alpha/boot/tools/mkbb.c
index 1185778..6f1b957 100644
--- a/arch/alpha/boot/tools/mkbb.c
+++ b/arch/alpha/boot/tools/mkbb.c
@@ -34,49 +34,49 @@
#endif
struct disklabel {
- u32 d_magic; /* must be DISKLABELMAGIC */
- u16 d_type, d_subtype;
- u8 d_typename[16];
- u8 d_packname[16];
- u32 d_secsize;
- u32 d_nsectors;
- u32 d_ntracks;
- u32 d_ncylinders;
- u32 d_secpercyl;
- u32 d_secprtunit;
- u16 d_sparespertrack;
- u16 d_sparespercyl;
- u32 d_acylinders;
- u16 d_rpm, d_interleave, d_trackskew, d_cylskew;
- u32 d_headswitch, d_trkseek, d_flags;
- u32 d_drivedata[5];
- u32 d_spare[5];
- u32 d_magic2; /* must be DISKLABELMAGIC */
- u16 d_checksum;
- u16 d_npartitions;
- u32 d_bbsize, d_sbsize;
- struct d_partition {
+ u32 d_magic; /* must be DISKLABELMAGIC */
+ u16 d_type, d_subtype;
+ u8 d_typename[16];
+ u8 d_packname[16];
+ u32 d_secsize;
+ u32 d_nsectors;
+ u32 d_ntracks;
+ u32 d_ncylinders;
+ u32 d_secpercyl;
+ u32 d_secprtunit;
+ u16 d_sparespertrack;
+ u16 d_sparespercyl;
+ u32 d_acylinders;
+ u16 d_rpm, d_interleave, d_trackskew, d_cylskew;
+ u32 d_headswitch, d_trkseek, d_flags;
+ u32 d_drivedata[5];
+ u32 d_spare[5];
+ u32 d_magic2; /* must be DISKLABELMAGIC */
+ u16 d_checksum;
+ u16 d_npartitions;
+ u32 d_bbsize, d_sbsize;
+ struct d_partition {
u32 p_size;
u32 p_offset;
u32 p_fsize;
u8 p_fstype;
u8 p_frag;
u16 p_cpg;
- } d_partitions[MAXPARTITIONS];
+ } d_partitions[MAXPARTITIONS];
};
typedef union __bootblock {
- struct {
- char __pad1[64];
- struct disklabel __label;
- } __u1;
- struct {
+ struct {
+ char __pad1[64];
+ struct disklabel __label;
+ } __u1;
+ struct {
unsigned long __pad2[63];
unsigned long __checksum;
- } __u2;
- char bootblock_bytes[512];
- unsigned long bootblock_quadwords[64];
+ } __u2;
+ char bootblock_bytes[512];
+ unsigned long bootblock_quadwords[64];
} bootblock;
#define bootblock_label __u1.__label
@@ -84,69 +84,67 @@ typedef union __bootblock {
int main(int argc, char ** argv)
{
- bootblock bootblock_from_disk;
- bootblock bootloader_image;
- int dev, fd;
- int i;
- int nread;
+ bootblock bootblock_from_disk;
+ bootblock bootloader_image;
+ int dev, fd;
+ int i;
+ int nread;
/* Make sure of the arg count */
- if(argc != 3) {
+ if(argc != 3) {
fprintf(stderr, "Usage: %s device lxboot\n", argv[0]);
exit(0);
- }
+ }
/* First, open the device and make sure it's accessible */
- dev = open(argv[1], O_RDWR);
- if(dev < 0) {
+ dev = open(argv[1], O_RDWR);
+ if(dev < 0) {
perror(argv[1]);
exit(0);
- }
+ }
/* Now open the lxboot and make sure it's reasonable */
- fd = open(argv[2], O_RDONLY);
- if(fd < 0) {
+ fd = open(argv[2], O_RDONLY);
+ if(fd < 0) {
perror(argv[2]);
close(dev);
exit(0);
- }
+ }
/* Read in the lxboot */
- nread = read(fd, &bootloader_image, sizeof(bootblock));
- if(nread != sizeof(bootblock)) {
+ nread = read(fd, &bootloader_image, sizeof(bootblock));
+ if(nread != sizeof(bootblock)) {
perror("lxboot read");
fprintf(stderr, "expected %zd, got %d\n", sizeof(bootblock), nread);
exit(0);
- }
+ }
/* Read in the bootblock from disk. */
- nread = read(dev, &bootblock_from_disk, sizeof(bootblock));
- if(nread != sizeof(bootblock)) {
+ nread = read(dev, &bootblock_from_disk, sizeof(bootblock));
+ if(nread != sizeof(bootblock)) {
perror("bootblock read");
fprintf(stderr, "expected %zd, got %d\n", sizeof(bootblock), nread);
exit(0);
- }
+ }
/* Swap the bootblock's disklabel into the bootloader */
- bootloader_image.bootblock_label = bootblock_from_disk.bootblock_label;
+ bootloader_image.bootblock_label = bootblock_from_disk.bootblock_label;
/* Calculate the bootblock checksum */
- bootloader_image.bootblock_checksum = 0;
- for(i = 0; i < 63; i++) {
- bootloader_image.bootblock_checksum +=
+ bootloader_image.bootblock_checksum = 0;
+ for(i = 0; i < 63; i++) {
+ bootloader_image.bootblock_checksum +=
bootloader_image.bootblock_quadwords[i];
- }
+ }
/* Write the whole thing out! */
- lseek(dev, 0L, SEEK_SET);
- if(write(dev, &bootloader_image, sizeof(bootblock)) != sizeof(bootblock)) {
+ lseek(dev, 0L, SEEK_SET);
+ if(write(dev, &bootloader_image, sizeof(bootblock)) != sizeof(bootblock)) {
perror("bootblock write");
exit(0);
- }
+ }
- close(fd);
- close(dev);
- exit(0);
+ close(fd);
+ close(dev);
+ exit(0);
}
-
-
--
1.9.1
next reply other threads:[~2014-07-16 4:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-16 4:13 Nicholas Krause [this message]
2014-07-16 4:14 ` [PATCH 2/4] alpha: checkpatch errors in mkbb for if statements Nicholas Krause
2014-07-16 4:14 ` [PATCH 3/4] alpha: Indent if Statements properly Nicholas Krause
2014-07-16 4:14 ` [PATCH 4/4] alpha: Remove checkpatch error in mkk.b Nicholas Krause
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1405484042-6879-1-git-send-email-xerofoify@gmail.com \
--to=xerofoify@gmail.com \
--cc=ink@jurassic.park.msu.ru \
--cc=linux-alpha@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mattst88@gmail.com \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®