mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Tomasz Figa <t.figa@samsung.com>
To: linux-samsung-soc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Kukjin Kim <kgene.kim@samsung.com>,
	Russell King - ARM Linux <linux@arm.linux.org.uk>,
	lauraa@codeaurora.org, linux-omap@vger.kernel.org,
	linus.walleij@linaro.org, santosh.shilimkar@ti.com,
	tony@atomide.com, drake@endlessm.com,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Tomasz Figa <tomasz.figa@gmail.com>,
	loeliger@gmail.com, Tomasz Figa <t.figa@samsung.com>
Subject: [PATCH v3 5/7] ARM: EXYNOS: Add .write_sec outer cache callback for L2C-310
Date: Thu, 17 Jul 2014 18:39:00 +0200	[thread overview]
Message-ID: <1405615142-21426-6-git-send-email-t.figa@samsung.com> (raw)
In-Reply-To: <1405615142-21426-1-git-send-email-t.figa@samsung.com>

Exynos4 SoCs equipped with an L2C-310 cache controller and running under
secure firmware require certain registers of aforementioned IP to be
accessed only from secure mode. This means that SMC calls are required
for certain register writes. To handle this, an implementation of
.write_sec and .configure callbacks is provided by this patch.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
---
 arch/arm/mach-exynos/firmware.c | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index f5e626d..554b350 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -17,6 +17,7 @@
 #include <asm/cacheflush.h>
 #include <asm/cputype.h>
 #include <asm/firmware.h>
+#include <asm/hardware/cache-l2x0.h>
 #include <asm/suspend.h>
 
 #include <mach/map.h>
@@ -120,6 +121,31 @@ static const struct firmware_ops exynos_firmware_ops = {
 	.resume			= exynos_resume,
 };
 
+static void exynos_l2_write_sec(unsigned long val, unsigned reg)
+{
+	switch (reg) {
+	case L2X0_CTRL:
+		if (val & L2X0_CTRL_EN)
+			exynos_smc(SMC_CMD_L2X0INVALL, 0, 0, 0);
+		exynos_smc(SMC_CMD_L2X0CTRL, val, 0, 0);
+		break;
+
+	case L2X0_DEBUG_CTRL:
+		exynos_smc(SMC_CMD_L2X0DEBUG, val, 0, 0);
+		break;
+
+	default:
+		WARN_ONCE(1, "%s: ignoring write to reg 0x%x\n", __func__, reg);
+	}
+}
+
+static void exynos_l2_configure(const struct l2x0_regs *regs)
+{
+	exynos_smc(SMC_CMD_L2X0SETUP1, regs->tag_latency, regs->data_latency,
+			regs->prefetch_ctrl);
+	exynos_smc(SMC_CMD_L2X0SETUP2, regs->pwr_ctrl, regs->aux_ctrl, 0);
+}
+
 void __init exynos_firmware_init(void)
 {
 	struct device_node *nd;
@@ -139,4 +165,16 @@ void __init exynos_firmware_init(void)
 	pr_info("Running under secure firmware.\n");
 
 	register_firmware_ops(&exynos_firmware_ops);
+
+	/*
+	 * Exynos 4 SoCs (based on Cortex A9 and equipped with L2C-310),
+	 * running under secure firmware, require certain registers of L2
+	 * cache controller to be written in secure mode. Here .write_sec
+	 * callback is provided to perform necessary SMC calls.
+	 */
+	if (IS_ENABLED(CONFIG_CACHE_L2X0)
+	    && read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
+		outer_cache.write_sec = exynos_l2_write_sec;
+		outer_cache.configure = exynos_l2_configure;
+	}
 }
-- 
1.9.3


  parent reply	other threads:[~2014-07-17 16:40 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-17 16:38 [PATCH v3 0/7] Enable L2 cache support on Exynos4210/4x12 SoCs Tomasz Figa
2014-07-17 16:38 ` [PATCH v3 1/7] ARM: l2c: Refactor the driver to use commit-like interface Tomasz Figa
2014-08-02 22:09   ` Russell King - ARM Linux
2014-08-02 22:16     ` Tomasz Figa
2014-07-17 16:38 ` [PATCH v3 2/7] ARM: l2c: Add interface to ask hypervisor to configure L2C Tomasz Figa
2014-07-17 16:38 ` [PATCH v3 3/7] ARM: l2c: Get outer cache .write_sec callback from mach_desc only if not NULL Tomasz Figa
2014-07-17 16:38 ` [PATCH v3 4/7] ARM: l2c: Add support for overriding prefetch settings Tomasz Figa
2014-07-17 16:39 ` Tomasz Figa [this message]
2014-07-17 16:39 ` [PATCH v3 6/7] ARM: EXYNOS: Add support for non-secure L2X0 resume Tomasz Figa
2014-07-17 16:39 ` [PATCH v3 7/7] ARM: dts: exynos4: Add nodes for L2 cache controller Tomasz Figa
2014-07-31 19:08 ` [PATCH v3 0/7] Enable L2 cache support on Exynos4210/4x12 SoCs Tomasz Figa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1405615142-21426-6-git-send-email-t.figa@samsung.com \
    --to=t.figa@samsung.com \
    --cc=drake@endlessm.com \
    --cc=kgene.kim@samsung.com \
    --cc=lauraa@codeaurora.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=loeliger@gmail.com \
    --cc=m.szyprowski@samsung.com \
    --cc=santosh.shilimkar@ti.com \
    --cc=tomasz.figa@gmail.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®