From: "Radim Krčmář" <rkrcmar@redhat.com>
To: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>,
Gleb Natapov <gleb@kernel.org>,
Raghavendra KT <raghavendra.kt@linux.vnet.ibm.com>,
Vinod Chegu <chegu_vinod@hp.com>,
Hui-Zhi Zhao <hui-zhi.zhao@hp.com>,
Christian Borntraeger <borntraeger@de.ibm.com>,
Lisa Mitchell <lisa.mitchell@hp.com>
Subject: [PATCH v3 4/7] KVM: VMX: dynamise PLE window
Date: Thu, 21 Aug 2014 18:08:08 +0200 [thread overview]
Message-ID: <1408637291-18533-5-git-send-email-rkrcmar@redhat.com> (raw)
In-Reply-To: <1408637291-18533-1-git-send-email-rkrcmar@redhat.com>
Window is increased on every PLE exit and decreased on every sched_in.
The idea is that we don't want to PLE exit if there is no preemption
going on.
We do this with sched_in() because it does not hold rq lock.
There are two new kernel parameters for changing the window:
ple_window_grow and ple_window_shrink
ple_window_grow affects the window on PLE exit and ple_window_shrink
does it on sched_in; depending on their value, the window is modifier
like this: (ple_window is kvm_intel's global)
ple_window_shrink/ |
ple_window_grow | PLE exit | sched_in
-------------------+--------------------+---------------------
< 1 | = ple_window | = ple_window
< ple_window | *= ple_window_grow | /= ple_window_shrink
otherwise | += ple_window_grow | -= ple_window_shrink
A third new parameter, ple_window_max, controls the maximal ple_window;
it is internally rounded down to a closest multiple of ple_window_grow.
VCPU's PLE window is never allowed below ple_window.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
---
arch/x86/kvm/vmx.c | 87 ++++++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 85 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 18e0e52..a2fa6ba 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -125,14 +125,32 @@ module_param(nested, bool, S_IRUGO);
* Time is measured based on a counter that runs at the same rate as the TSC,
* refer SDM volume 3b section 21.6.13 & 22.1.3.
*/
-#define KVM_VMX_DEFAULT_PLE_GAP 128
-#define KVM_VMX_DEFAULT_PLE_WINDOW 4096
+#define KVM_VMX_DEFAULT_PLE_GAP 128
+#define KVM_VMX_DEFAULT_PLE_WINDOW 4096
+#define KVM_VMX_DEFAULT_PLE_WINDOW_GROW 2
+#define KVM_VMX_DEFAULT_PLE_WINDOW_SHRINK 0
+#define KVM_VMX_DEFAULT_PLE_WINDOW_MAX \
+ INT_MAX / KVM_VMX_DEFAULT_PLE_WINDOW_GROW
+
static int ple_gap = KVM_VMX_DEFAULT_PLE_GAP;
module_param(ple_gap, int, S_IRUGO);
static int ple_window = KVM_VMX_DEFAULT_PLE_WINDOW;
module_param(ple_window, int, S_IRUGO);
+/* Default doubles per-vcpu window every exit. */
+static int ple_window_grow = KVM_VMX_DEFAULT_PLE_WINDOW_GROW;
+module_param(ple_window_grow, int, S_IRUGO);
+
+/* Default resets per-vcpu window every exit to ple_window. */
+static int ple_window_shrink = KVM_VMX_DEFAULT_PLE_WINDOW_SHRINK;
+module_param(ple_window_shrink, int, S_IRUGO);
+
+/* Default is to compute the maximum so we can never overflow. */
+static int ple_window_actual_max = KVM_VMX_DEFAULT_PLE_WINDOW_MAX;
+static int ple_window_max = KVM_VMX_DEFAULT_PLE_WINDOW_MAX;
+module_param(ple_window_max, int, S_IRUGO);
+
extern const ulong vmx_return;
#define NR_AUTOLOAD_MSRS 8
@@ -5679,12 +5697,73 @@ out:
return ret;
}
+static int __grow_ple_window(int val)
+{
+ if (ple_window_grow < 1)
+ return ple_window;
+
+ val = min(val, ple_window_actual_max);
+
+ if (ple_window_grow < ple_window)
+ val *= ple_window_grow;
+ else
+ val += ple_window_grow;
+
+ return val;
+}
+
+static int __shrink_ple_window(int val, int modifier, int minimum)
+{
+ if (modifier < 1)
+ return ple_window;
+
+ if (modifier < ple_window)
+ val /= modifier;
+ else
+ val -= modifier;
+
+ return max(val, minimum);
+}
+
+static void grow_ple_window(struct kvm_vcpu *vcpu)
+{
+ struct vcpu_vmx *vmx = to_vmx(vcpu);
+
+ vmx->ple_window = __grow_ple_window(vmx->ple_window);
+}
+
+static void shrink_ple_window(struct kvm_vcpu *vcpu)
+{
+ struct vcpu_vmx *vmx = to_vmx(vcpu);
+
+ vmx->ple_window = __shrink_ple_window(vmx->ple_window,
+ ple_window_shrink, ple_window);
+}
+
+/*
+ * ple_window_actual_max is computed to be one grow_ple_window() below
+ * ple_window_max. (See __grow_ple_window for the reason.)
+ * This prevents overflows, because ple_window_max is int.
+ * ple_window_max effectively rounded down to a multiple of ple_window_grow in
+ * this process.
+ * ple_window_max is also prevented from setting vmx->ple_window < ple_window.
+ */
+static void update_ple_window_actual_max(void)
+{
+ ple_window_actual_max =
+ __shrink_ple_window(max(ple_window_max, ple_window),
+ ple_window_grow, INT_MIN);
+}
+
/*
* Indicate a busy-waiting vcpu in spinlock. We do not enable the PAUSE
* exiting, so only get here on cpu with PAUSE-Loop-Exiting.
*/
static int handle_pause(struct kvm_vcpu *vcpu)
{
+ if (ple_gap)
+ grow_ple_window(vcpu);
+
skip_emulated_instruction(vcpu);
kvm_vcpu_on_spin(vcpu);
@@ -8854,6 +8933,8 @@ static int vmx_check_intercept(struct kvm_vcpu *vcpu,
void vmx_sched_in(struct kvm_vcpu *vcpu, int cpu)
{
+ if (ple_gap)
+ shrink_ple_window(vcpu);
}
static struct kvm_x86_ops vmx_x86_ops = {
@@ -9077,6 +9158,8 @@ static int __init vmx_init(void)
} else
kvm_disable_tdp();
+ update_ple_window_actual_max();
+
return 0;
out7:
--
2.1.0
next prev parent reply other threads:[~2014-08-21 16:10 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-21 16:08 [PATCH v3 0/7] Dynamic Pause Loop Exiting window Radim Krčmář
2014-08-21 16:08 ` [PATCH v3 1/7] KVM: add kvm_arch_sched_in Radim Krčmář
2014-08-21 18:49 ` Raghavendra K T
2014-08-21 20:31 ` Radim Krčmář
2014-08-21 21:12 ` Paolo Bonzini
2014-08-21 16:08 ` [PATCH v3 2/7] KVM: x86: introduce sched_in to kvm_x86_ops Radim Krčmář
2014-08-21 18:50 ` Raghavendra K T
2014-08-21 16:08 ` [PATCH v3 3/7] KVM: VMX: make PLE window per-VCPU Radim Krčmář
2014-08-21 18:52 ` Raghavendra K T
2014-08-21 16:08 ` Radim Krčmář [this message]
2014-08-21 19:10 ` [PATCH v3 4/7] KVM: VMX: dynamise PLE window Raghavendra K T
2014-08-21 20:31 ` Paolo Bonzini
2014-08-21 20:59 ` Radim Krčmář
2014-08-21 16:08 ` [PATCH v3 5/7] KVM: trace kvm_ple_window grow/shrink Radim Krčmář
2014-08-25 13:53 ` Sabrina Dubroca
2014-08-25 14:32 ` Radim Krčmář
2014-08-25 14:44 ` Paolo Bonzini
2014-08-21 16:08 ` [PATCH v3 6/7] KVM: VMX: runtime knobs for dynamic PLE window Radim Krčmář
2014-08-21 19:17 ` Raghavendra K T
2014-08-21 21:03 ` Radim Krčmář
2014-08-21 16:08 ` [PATCH v3 7/7] KVM: VMX: optimize ple_window updates to VMCS Radim Krčmář
2014-08-21 19:18 ` Raghavendra K T
2014-08-21 16:30 ` [PATCH v3 0/7] Dynamic Pause Loop Exiting window Paolo Bonzini
2014-08-21 16:50 ` Radim Krčmář
2014-08-21 16:53 ` Paolo Bonzini
2014-08-22 4:45 ` Wanpeng Li
2014-08-25 15:11 ` Radim Krčmář
2014-08-21 17:03 ` Raghavendra K T
2014-08-21 18:40 ` Raghavendra K T
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408637291-18533-5-git-send-email-rkrcmar@redhat.com \
--to=rkrcmar@redhat.com \
--cc=borntraeger@de.ibm.com \
--cc=chegu_vinod@hp.com \
--cc=gleb@kernel.org \
--cc=hui-zhi.zhao@hp.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lisa.mitchell@hp.com \
--cc=pbonzini@redhat.com \
--cc=raghavendra.kt@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®