From: Joe Perches <joe@perches.com>
To: Chaitra Ramaiah <linux.delve@gmail.com>
Cc: gregkh@linuxfoundation.org, burzalodowa@gmail.com,
anarey@gmail.com, rmfrfs@gmail.com, gdonald@gmail.com,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] Staging: rtl8192u: fix brace style coding issue in r819xU_firmware.c
Date: Thu, 04 Sep 2014 08:28:34 -0700 [thread overview]
Message-ID: <1409844514.2770.6.camel@joe-AO725> (raw)
In-Reply-To: <1409843463-3702-2-git-send-email-linux.delve@gmail.com>
On Thu, 2014-09-04 at 20:41 +0530, Chaitra Ramaiah wrote:
> Signed-off-by: Chaitra Ramaiah <linux.delve@gmail.com>
Please put the commit log description from your
cover letter into this patch submission and only
send 1 email instead of than 2.
Rather than add these one-line-at-a-time type changes,
I'd just as soon see these all corrected at the same
time using something like this below.
It also allows git diff -w to be shown as empty in a
commit log and this should be verified before and after
as compilable with no changes using scripts/objdiff.
$ ./scripts/checkpatch.pl --fix-inplace --types=spacing --strict -f drivers/staging/rtl8192u/r819xU_firmware.c
$ git diff --stat -p drivers/staging/rtl8192u/r819xU_firmware.c
drivers/staging/rtl8192u/r819xU_firmware.c | 52 +++++++++++++++---------------
1 file changed, 26 insertions(+), 26 deletions(-)
diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c
index 671cbe6..8e116f8 100644
--- a/drivers/staging/rtl8192u/r819xU_firmware.c
+++ b/drivers/staging/rtl8192u/r819xU_firmware.c
@@ -51,7 +51,7 @@ static bool fw_download_code(struct net_device *dev, u8 *code_virtual_address,
frag_threshold = pfirmware->cmdpacket_frag_thresold;
do {
if ((buffer_len - frag_offset) > frag_threshold) {
- frag_length = frag_threshold ;
+ frag_length = frag_threshold;
bLastIniPkt = 0;
} else {
@@ -66,7 +66,7 @@ static bool fw_download_code(struct net_device *dev, u8 *code_virtual_address,
skb = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
if (!skb)
return false;
- memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
+ memcpy((unsigned char *)(skb->cb), &dev, sizeof(dev));
tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
tcb_desc->queue_index = TXCMD_QUEUE;
tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT;
@@ -78,19 +78,19 @@ static bool fw_download_code(struct net_device *dev, u8 *code_virtual_address,
* Transform from little endian to big endian
* and pending zero
*/
- for(i=0 ; i < frag_length; i+=4) {
- *seg_ptr++ = ((i+0)<frag_length)?code_virtual_address[i+3]:0;
- *seg_ptr++ = ((i+1)<frag_length)?code_virtual_address[i+2]:0;
- *seg_ptr++ = ((i+2)<frag_length)?code_virtual_address[i+1]:0;
- *seg_ptr++ = ((i+3)<frag_length)?code_virtual_address[i+0]:0;
+ for (i = 0 ; i < frag_length; i += 4) {
+ *seg_ptr++ = ((i+0) < frag_length) ? code_virtual_address[i+3] : 0;
+ *seg_ptr++ = ((i+1) < frag_length) ? code_virtual_address[i+2] : 0;
+ *seg_ptr++ = ((i+2) < frag_length) ? code_virtual_address[i+1] : 0;
+ *seg_ptr++ = ((i+3) < frag_length) ? code_virtual_address[i+0] : 0;
}
- tcb_desc->txbuf_size= (u16)i;
+ tcb_desc->txbuf_size = (u16)i;
skb_put(skb, i);
- if (!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)||
- (!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\
- (priv->ieee80211->queue_stop) ) {
- RT_TRACE(COMP_FIRMWARE,"=====================================================> tx full!\n");
+ if (!priv->ieee80211->check_nic_enough_desc(dev, tcb_desc->queue_index) ||
+ (!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index])) || \
+ (priv->ieee80211->queue_stop)) {
+ RT_TRACE(COMP_FIRMWARE, "=====================================================> tx full!\n");
skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
} else {
priv->ieee80211->softmac_hard_start_xmit(skb, dev);
@@ -99,7 +99,7 @@ static bool fw_download_code(struct net_device *dev, u8 *code_virtual_address,
code_virtual_address += frag_length;
frag_offset += frag_length;
- }while(frag_offset < buffer_len);
+ } while (frag_offset < buffer_len);
return rt_status;
@@ -131,7 +131,7 @@ static bool CPUcheck_maincodeok_turnonCPU(struct net_device *dev)
if (CPU_status&CPU_GEN_PUT_CODE_OK)
break;
- }while(check_putcodeOK_time--);
+ } while (check_putcodeOK_time--);
if (!(CPU_status&CPU_GEN_PUT_CODE_OK)) {
RT_TRACE(COMP_ERR, "Download Firmware: Put code fail!\n");
@@ -151,7 +151,7 @@ static bool CPUcheck_maincodeok_turnonCPU(struct net_device *dev)
if (CPU_status&CPU_GEN_BOOT_RDY)
break;
- }while(check_bootOk_time--);
+ } while (check_bootOk_time--);
if (!(CPU_status&CPU_GEN_BOOT_RDY)) {
goto CPUCheckMainCodeOKAndTurnOnCPU_Fail;
@@ -181,7 +181,7 @@ static bool CPUcheck_firmware_ready(struct net_device *dev)
if (CPU_status&CPU_GEN_FIRM_RDY)
break;
- }while(check_time--);
+ } while (check_time--);
if (!(CPU_status&CPU_GEN_FIRM_RDY))
goto CPUCheckFirmwareReady_Fail;
@@ -217,17 +217,17 @@ bool init_firmware(struct net_device *dev)
RT_TRACE(COMP_FIRMWARE, " PlatformInitFirmware()==>\n");
- if (pfirmware->firmware_status == FW_STATUS_0_INIT ) {
+ if (pfirmware->firmware_status == FW_STATUS_0_INIT) {
/* it is called by reset */
rst_opt = OPT_SYSTEM_RESET;
starting_state = FW_INIT_STEP0_BOOT;
// TODO: system reset
- }else if (pfirmware->firmware_status == FW_STATUS_5_READY) {
+ } else if (pfirmware->firmware_status == FW_STATUS_5_READY) {
/* it is called by Initialize */
rst_opt = OPT_FIRMWARE_RESET;
starting_state = FW_INIT_STEP2_DATA;
- }else {
+ } else {
RT_TRACE(COMP_FIRMWARE, "PlatformInitFirmware: undefined firmware state\n");
}
@@ -235,14 +235,14 @@ bool init_firmware(struct net_device *dev)
* Download boot, main, and data image for System reset.
* Download data image for firmware reset
*/
- for(init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) {
+ for (init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) {
/*
* Open image file, and map file to continuous memory if open file success.
* or read image file from array. Default load from IMG file
*/
if (rst_opt == OPT_SYSTEM_RESET) {
- rc = request_firmware(&fw_entry, fw_name[init_step],&priv->udev->dev);
- if (rc < 0 ) {
+ rc = request_firmware(&fw_entry, fw_name[init_step], &priv->udev->dev);
+ if (rc < 0) {
RT_TRACE(COMP_ERR, "request firmware fail!\n");
goto download_firmware_fail;
}
@@ -253,17 +253,17 @@ bool init_firmware(struct net_device *dev)
}
if (init_step != FW_INIT_STEP1_MAIN) {
- memcpy(pfirmware->firmware_buf,fw_entry->data,fw_entry->size);
+ memcpy(pfirmware->firmware_buf, fw_entry->data, fw_entry->size);
mapped_file = pfirmware->firmware_buf;
file_length = fw_entry->size;
} else {
memset(pfirmware->firmware_buf, 0, 128);
- memcpy(&pfirmware->firmware_buf[128],fw_entry->data,fw_entry->size);
+ memcpy(&pfirmware->firmware_buf[128], fw_entry->data, fw_entry->size);
mapped_file = pfirmware->firmware_buf;
file_length = fw_entry->size + 128;
}
pfirmware->firmware_buf_size = file_length;
- }else if (rst_opt == OPT_FIRMWARE_RESET ) {
+ } else if (rst_opt == OPT_FIRMWARE_RESET) {
/* we only need to download data.img here */
mapped_file = pfirmware->firmware_buf;
file_length = pfirmware->firmware_buf_size;
@@ -318,7 +318,7 @@ bool init_firmware(struct net_device *dev)
rt_status = CPUcheck_firmware_ready(dev);
if (rt_status != TRUE) {
- RT_TRACE(COMP_ERR, "CPUcheck_firmware_ready fail(%d)!\n",rt_status);
+ RT_TRACE(COMP_ERR, "CPUcheck_firmware_ready fail(%d)!\n", rt_status);
goto download_firmware_fail;
}
next prev parent reply other threads:[~2014-09-04 15:28 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-04 15:11 Chaitra Ramaiah
2014-09-04 15:11 ` Chaitra Ramaiah
2014-09-04 15:28 ` Joe Perches [this message]
2014-09-04 15:32 ` Joe Perches
[not found] <yes>
2014-09-04 13:50 ` linux.delve
2014-09-04 14:09 ` Chaitra Ramaiah
2014-09-04 14:27 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409844514.2770.6.camel@joe-AO725 \
--to=joe@perches.com \
--cc=anarey@gmail.com \
--cc=burzalodowa@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gdonald@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux.delve@gmail.com \
--cc=rmfrfs@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®