mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Josh Cartwright <joshc@codeaurora.org>
To: Bjorn Andersson <bjorn.andersson@sonymobile.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-kernel@vger.kernel.org
Cc: Pramod Gurav <pramod.gurav@smartplayin.com>,
	Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH v2] pinctrl: qcom: use restart_notifier mechanism for ps_hold
Date: Tue, 23 Sep 2014 15:59:53 -0500	[thread overview]
Message-ID: <1411505993-8414-1-git-send-email-joshc@codeaurora.org> (raw)

By converting to the restart_notifier mechanism for restart, we allow
for other mechanisms, like the watchdog, to be used for restart in the
case where PS_HOLD has failed to reset the chip.

Since this mechanism may be one of several mechanisms registered, change
the post-ps_hold write timeout to be a more reasonable 1 second instead
of 10 seconds.

Choose priority 128, as according to documentation, this mechanism "is
sufficient to restart the entire system".

Cc: Pramod Gurav <pramod.gurav@smartplayin.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Tested-by: Pramod Gurav <pramod.gurav@smartplayin.com>
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
---

Changes since v1:
  - Simplified conditional notifier block registration
  - Reduced wait time to 1s, which I've found to be sufficient on an IFC6410
    board.

 drivers/pinctrl/qcom/pinctrl-msm.c | 31 ++++++++++++++++++-------------
 1 file changed, 18 insertions(+), 13 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index d5ed127..d30dddd 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -27,8 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
-
-#include <asm/system_misc.h>
+#include <linux/reboot.h>
 
 #include "../core.h"
 #include "../pinconf.h"
@@ -43,6 +42,7 @@
  * @dev:            device handle.
  * @pctrl:          pinctrl handle.
  * @chip:           gpiochip handle.
+ * @restart_nb:     restart notifier block.
  * @irq:            parent irq for the TLMM irq_chip.
  * @lock:           Spinlock to protect register resources as well
  *                  as msm_pinctrl data structures.
@@ -56,6 +56,7 @@ struct msm_pinctrl {
 	struct device *dev;
 	struct pinctrl_dev *pctrl;
 	struct gpio_chip chip;
+	struct notifier_block restart_nb;
 	int irq;
 
 	spinlock_t lock;
@@ -852,13 +853,14 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl)
 	return 0;
 }
 
-#ifdef CONFIG_ARM
-static void __iomem *msm_ps_hold;
-
-static void msm_reset(enum reboot_mode reboot_mode, const char *cmd)
+static int msm_ps_hold_restart(struct notifier_block *nb, unsigned long action,
+			       void *data)
 {
-	writel(0, msm_ps_hold);
-	mdelay(10000);
+	struct msm_pinctrl *pctrl = container_of(nb, struct msm_pinctrl, restart_nb);
+
+	writel(0, pctrl->regs + PS_HOLD_OFFSET);
+	mdelay(1000);
+	return NOTIFY_DONE;
 }
 
 static void msm_pinctrl_setup_pm_reset(struct msm_pinctrl *pctrl)
@@ -868,13 +870,14 @@ static void msm_pinctrl_setup_pm_reset(struct msm_pinctrl *pctrl)
 
 	for (; i <= pctrl->soc->nfunctions; i++)
 		if (!strcmp(func[i].name, "ps_hold")) {
-			msm_ps_hold = pctrl->regs + PS_HOLD_OFFSET;
-			arm_pm_restart = msm_reset;
+			pctrl->restart_nb.notifier_call = msm_ps_hold_restart;
+			pctrl->restart_nb.priority = 128;
+			if (register_restart_handler(&pctrl->restart_nb))
+				dev_err(pctrl->dev,
+					"failed to setup restart handler.\n");
+			break;
 		}
 }
-#else
-static void msm_pinctrl_setup_pm_reset(const struct msm_pinctrl *pctrl) {}
-#endif
 
 int msm_pinctrl_probe(struct platform_device *pdev,
 		      const struct msm_pinctrl_soc_data *soc_data)
@@ -943,6 +946,8 @@ int msm_pinctrl_remove(struct platform_device *pdev)
 
 	pinctrl_unregister(pctrl->pctrl);
 
+	unregister_restart_handler(&pctrl->restart_nb);
+
 	return 0;
 }
 EXPORT_SYMBOL(msm_pinctrl_remove);
-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation


             reply	other threads:[~2014-09-23 21:05 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-23 20:59 Josh Cartwright [this message]
2014-09-23 21:57 ` Guenter Roeck
2014-09-25  7:41 ` Linus Walleij
2014-09-26  0:49   ` Bjorn Andersson
2014-09-26  8:37 ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1411505993-8414-1-git-send-email-joshc@codeaurora.org \
    --to=joshc@codeaurora.org \
    --cc=bjorn.andersson@sonymobile.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=pramod.gurav@smartplayin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome