From: Guenter Roeck <linux@roeck-us.net>
To: Josh Cartwright <joshc@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com>,
Linus Walleij <linus.walleij@linaro.org>,
linux-kernel@vger.kernel.org,
Pramod Gurav <pramod.gurav@smartplayin.com>
Subject: Re: [PATCH v2] pinctrl: qcom: use restart_notifier mechanism for ps_hold
Date: Tue, 23 Sep 2014 14:57:31 -0700 [thread overview]
Message-ID: <20140923215731.GC15481@roeck-us.net> (raw)
In-Reply-To: <1411505993-8414-1-git-send-email-joshc@codeaurora.org>
On Tue, Sep 23, 2014 at 03:59:53PM -0500, Josh Cartwright wrote:
> By converting to the restart_notifier mechanism for restart, we allow
> for other mechanisms, like the watchdog, to be used for restart in the
> case where PS_HOLD has failed to reset the chip.
>
> Since this mechanism may be one of several mechanisms registered, change
> the post-ps_hold write timeout to be a more reasonable 1 second instead
> of 10 seconds.
>
> Choose priority 128, as according to documentation, this mechanism "is
> sufficient to restart the entire system".
>
> Cc: Pramod Gurav <pramod.gurav@smartplayin.com>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Tested-by: Pramod Gurav <pramod.gurav@smartplayin.com>
> Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Looks good to me.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
>
> Changes since v1:
> - Simplified conditional notifier block registration
> - Reduced wait time to 1s, which I've found to be sufficient on an IFC6410
> board.
>
> drivers/pinctrl/qcom/pinctrl-msm.c | 31 ++++++++++++++++++-------------
> 1 file changed, 18 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
> index d5ed127..d30dddd 100644
> --- a/drivers/pinctrl/qcom/pinctrl-msm.c
> +++ b/drivers/pinctrl/qcom/pinctrl-msm.c
> @@ -27,8 +27,7 @@
> #include <linux/gpio.h>
> #include <linux/interrupt.h>
> #include <linux/spinlock.h>
> -
> -#include <asm/system_misc.h>
> +#include <linux/reboot.h>
>
> #include "../core.h"
> #include "../pinconf.h"
> @@ -43,6 +42,7 @@
> * @dev: device handle.
> * @pctrl: pinctrl handle.
> * @chip: gpiochip handle.
> + * @restart_nb: restart notifier block.
> * @irq: parent irq for the TLMM irq_chip.
> * @lock: Spinlock to protect register resources as well
> * as msm_pinctrl data structures.
> @@ -56,6 +56,7 @@ struct msm_pinctrl {
> struct device *dev;
> struct pinctrl_dev *pctrl;
> struct gpio_chip chip;
> + struct notifier_block restart_nb;
> int irq;
>
> spinlock_t lock;
> @@ -852,13 +853,14 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl)
> return 0;
> }
>
> -#ifdef CONFIG_ARM
> -static void __iomem *msm_ps_hold;
> -
> -static void msm_reset(enum reboot_mode reboot_mode, const char *cmd)
> +static int msm_ps_hold_restart(struct notifier_block *nb, unsigned long action,
> + void *data)
> {
> - writel(0, msm_ps_hold);
> - mdelay(10000);
> + struct msm_pinctrl *pctrl = container_of(nb, struct msm_pinctrl, restart_nb);
> +
> + writel(0, pctrl->regs + PS_HOLD_OFFSET);
> + mdelay(1000);
> + return NOTIFY_DONE;
> }
>
> static void msm_pinctrl_setup_pm_reset(struct msm_pinctrl *pctrl)
> @@ -868,13 +870,14 @@ static void msm_pinctrl_setup_pm_reset(struct msm_pinctrl *pctrl)
>
> for (; i <= pctrl->soc->nfunctions; i++)
> if (!strcmp(func[i].name, "ps_hold")) {
> - msm_ps_hold = pctrl->regs + PS_HOLD_OFFSET;
> - arm_pm_restart = msm_reset;
> + pctrl->restart_nb.notifier_call = msm_ps_hold_restart;
> + pctrl->restart_nb.priority = 128;
> + if (register_restart_handler(&pctrl->restart_nb))
> + dev_err(pctrl->dev,
> + "failed to setup restart handler.\n");
> + break;
> }
> }
> -#else
> -static void msm_pinctrl_setup_pm_reset(const struct msm_pinctrl *pctrl) {}
> -#endif
>
> int msm_pinctrl_probe(struct platform_device *pdev,
> const struct msm_pinctrl_soc_data *soc_data)
> @@ -943,6 +946,8 @@ int msm_pinctrl_remove(struct platform_device *pdev)
>
> pinctrl_unregister(pctrl->pctrl);
>
> + unregister_restart_handler(&pctrl->restart_nb);
> +
> return 0;
> }
> EXPORT_SYMBOL(msm_pinctrl_remove);
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> hosted by The Linux Foundation
>
next prev parent reply other threads:[~2014-09-23 21:57 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-23 20:59 Josh Cartwright
2014-09-23 21:57 ` Guenter Roeck [this message]
2014-09-25 7:41 ` Linus Walleij
2014-09-26 0:49 ` Bjorn Andersson
2014-09-26 8:37 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140923215731.GC15481@roeck-us.net \
--to=linux@roeck-us.net \
--cc=bjorn.andersson@sonymobile.com \
--cc=joshc@codeaurora.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pramod.gurav@smartplayin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome