mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Chris Zhong <zyw@rock-chips.com>
To: dianders@chromium.org, heiko@sntech.de
Cc: linux-rockchip@lists.infradead.org, lee.jones@linaro.org,
	broonie@kernel.org, Chris Zhong <zyw@rock-chips.com>,
	devicetree@vger.kernel.org, Liam Girdwood <lgirdwood@gmail.com>,
	Kumar Gala <galak@codeaurora.org>,
	linux-kernel@vger.kernel.org,
	Grant Likely <grant.likely@linaro.org>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>
Subject: [PATCH v7 0/2] regulator: get voltage & duty table from dts for pwm-regulator
Date: Sun, 28 Sep 2014 10:28:52 +0800	[thread overview]
Message-ID: <1411871334-17692-1-git-send-email-zyw@rock-chips.com> (raw)

get voltage & duty table from device tree might be better, other platforms
can also use this driver without any modify.
Tested on a rk3288 sdk board as logic voltage regulator.

Changes in v7:
Adviced by Mark Brown
- re-edit changelog
- re-edit changelog

Changes in v6:
Adviced by Mark Rutland
- fix a spelling error

Changes in v4:
Adviced by Doug Anderson
- improve kconfig
- add const for desc structure
Adviced by Doug Anderson
- remove regulator-always-on and regulator-boot-on from the Example

Changes in v3:
Adviced by Doug Anderson
- Make Kconfig & Makefile alphabetical
- remove pwm_reg_period from pwm_regulator_data
- modify the calculation in pwm_regulator_set_voltage_sel
- add length validity check
Adviced by Doug Anderson
- update the Example

Changes in v2:
Adviced by Lee Jones
- rename the file
- remove all the prefix st_
- add depend on PWM in Kconfig
Adviced by Lee Jones
- rename the documentation
Adviced by Doug Anderson
- update the example
Adviced by Mark Rutland
- remove pwm-reg-period

Chris Zhong (2):
  regulator: pwm-regulator: get voltage and duty table from dts
  dt-bindings: add devicetree bindings for pwm regulator

 .../bindings/regulator/pwm-regulator.txt           |   27 ++++
 drivers/regulator/Kconfig                          |   13 +-
 drivers/regulator/Makefile                         |    2 +-
 drivers/regulator/{st-pwm.c => pwm-regulator.c}    |  147 ++++++++++----------
 4 files changed, 112 insertions(+), 77 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/pwm-regulator.txt
 rename drivers/regulator/{st-pwm.c => pwm-regulator.c} (44%)

-- 
1.7.9.5


             reply	other threads:[~2014-09-28  2:29 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-28  2:28 Chris Zhong [this message]
2014-09-28  2:28 ` [PATCH v7 1/2] regulator: pwm-regulator: get voltage and duty table from dts Chris Zhong
2014-09-28  2:28 ` [PATCH v7 2/2] dt-bindings: add devicetree bindings for pwm regulator Chris Zhong
2014-09-28 10:38 ` [PATCH v7 0/2] regulator: get voltage & duty table from dts for pwm-regulator Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1411871334-17692-1-git-send-email-zyw@rock-chips.com \
    --to=zyw@rock-chips.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=galak@codeaurora.org \
    --cc=grant.likely@linaro.org \
    --cc=heiko@sntech.de \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®