From: Chun-Hao Lin <hau@realtek.com>
To: <netdev@vger.kernel.org>
Cc: <nic_swsd@realtek.com>, <linux-kernel@vger.kernel.org>,
Chun-Hao Lin <hau@realtek.com>
Subject: [PATCH v2 net-next 01/10] r8169:change uppercase number to lowercase nubmer
Date: Wed, 1 Oct 2014 23:17:12 +0800 [thread overview]
Message-ID: <1412176641-24393-1-git-send-email-hau@realtek.com> (raw)
Signed-off-by: Chun-Hao Lin <hau@realtek.com>
---
drivers/net/ethernet/realtek/r8169.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 1d81238..000bd6c 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -3692,8 +3692,8 @@ static void rtl8168h_2_hw_phy_config(struct rtl8169_private *tp)
ioffset_p0 |= (data & (0x07));
data = (ioffset_p3<<12)|(ioffset_p2<<8)|(ioffset_p1<<4)|(ioffset_p0);
- if ((ioffset_p3 != 0x0F) || (ioffset_p2 != 0x0F) ||
- (ioffset_p1 != 0x0F) || (ioffset_p0 == 0x0F)) {
+ if ((ioffset_p3 != 0x0f) || (ioffset_p2 != 0x0f) ||
+ (ioffset_p1 != 0x0f) || (ioffset_p0 == 0x0f)) {
rtl_writephy(tp, 0x1f, 0x0bcf);
rtl_writephy(tp, 0x16, data);
rtl_writephy(tp, 0x1f, 0x0000);
@@ -4265,7 +4265,7 @@ static void r810x_pll_power_up(struct rtl8169_private *tp)
break;
case RTL_GIGA_MAC_VER_47:
case RTL_GIGA_MAC_VER_48:
- RTL_W8(PMCH, RTL_R8(PMCH) | 0xC0);
+ RTL_W8(PMCH, RTL_R8(PMCH) | 0xc0);
break;
default:
RTL_W8(PMCH, RTL_R8(PMCH) | 0x80);
@@ -4395,7 +4395,7 @@ static void r8168_pll_power_up(struct rtl8169_private *tp)
break;
case RTL_GIGA_MAC_VER_45:
case RTL_GIGA_MAC_VER_46:
- RTL_W8(PMCH, RTL_R8(PMCH) | 0xC0);
+ RTL_W8(PMCH, RTL_R8(PMCH) | 0xc0);
break;
case RTL_GIGA_MAC_VER_40:
case RTL_GIGA_MAC_VER_41:
@@ -4975,7 +4975,7 @@ static void rtl_hw_start_8169(struct net_device *dev)
if (tp->mac_version == RTL_GIGA_MAC_VER_02 ||
tp->mac_version == RTL_GIGA_MAC_VER_03) {
- dprintk("Set MAC Reg C+CR Offset 0xE0. "
+ dprintk("Set MAC Reg C+CR Offset 0xe0. "
"Bit-3 and bit-14 MUST be 1\n");
tp->cp_cmd |= (1 << 14);
}
@@ -5010,7 +5010,7 @@ static void rtl_hw_start_8169(struct net_device *dev)
rtl_set_rx_mode(dev);
/* no early-rx interrupts */
- RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000);
+ RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xf000);
}
static void rtl_csi_write(struct rtl8169_private *tp, int addr, int value)
@@ -5858,7 +5858,7 @@ static void rtl_hw_start_8168(struct net_device *dev)
rtl_set_rx_mode(dev);
- RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000);
+ RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xf000);
}
#define R810X_CPCMD_QUIRK_MASK (\
@@ -7706,8 +7706,8 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
tp->mac_version == RTL_GIGA_MAC_VER_48) {
u16 mac_addr[3];
- *(u32 *)&mac_addr[0] = rtl_eri_read(tp, 0xE0, ERIAR_EXGMAC);
- *(u16 *)&mac_addr[2] = rtl_eri_read(tp, 0xE4, ERIAR_EXGMAC);
+ *(u32 *)&mac_addr[0] = rtl_eri_read(tp, 0xe0, ERIAR_EXGMAC);
+ *(u16 *)&mac_addr[2] = rtl_eri_read(tp, 0xe4, ERIAR_EXGMAC);
if (is_valid_ether_addr((u8 *)mac_addr))
rtl_rar_set(tp, (u8 *)mac_addr);
--
1.8.3.2
next reply other threads:[~2014-10-01 15:17 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-01 15:17 Chun-Hao Lin [this message]
2014-10-01 15:17 ` [PATCH v2 net-next 02/10] r8169:add disable/enable RTL8168G pll function Chun-Hao Lin
2014-10-01 15:17 ` [PATCH v2 net-next 03/10] r8169:add disable/enable RTL8411B " Chun-Hao Lin
2014-10-01 15:17 ` [PATCH v2 net-next 04/10] r8169:add support more chips to get mac address from backup mac address register Chun-Hao Lin
2014-10-01 15:17 ` [PATCH v2 net-next 05/10] r8169:add more chips to support magic packet v2 Chun-Hao Lin
2014-10-01 15:17 ` [PATCH v2 net-next 06/10] r8169:for function "rtl_w1w0_phy" change its name and behavior Chun-Hao Lin
2014-10-01 15:17 ` [PATCH v2 net-next 07/10] r8169:change the name of function"rtl_w1w0_eri" Chun-Hao Lin
2014-10-01 15:17 ` [PATCH v2 net-next 08/10] r8169:change the name of function "r8168dp_check_dash" to "r8168_check_dash" Chun-Hao Lin
2014-10-01 15:17 ` [PATCH v2 net-next 09/10] r8169:modify the behavior of function "rtl8168_oob_notify" Chun-Hao Lin
2014-10-01 15:17 ` [PATCH v2 net-next 10/10] r8169:call "rtl8168_driver_start" "rtl8168_driver_stop" only when hardware dash function is enabled Chun-Hao Lin
2014-10-01 17:17 ` [PATCH v2 net-next 01/10] r8169:change uppercase number to lowercase nubmer Sergei Shtylyov
2014-10-01 19:34 ` David Miller
2014-10-02 5:35 ` [PATCH v2 net-next 01/10] r8169:change uppercase numbertolowercase nubmer Hau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1412176641-24393-1-git-send-email-hau@realtek.com \
--to=hau@realtek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®