From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
To: Mark Brown <broonie@kernel.org>
Cc: Chanwoo Choi <cw00.choi@samsung.com>,
Olof Johansson <olof@lixom.net>, Chris Zhong <zyw@rock-chips.com>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Abhilash Kesavan <kesavan.abhilash@gmail.com>,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org,
Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Subject: [PATCH v3 5/5] ARM: dts: Configure regulators for suspend on exynos Peach boards
Date: Mon, 20 Oct 2014 16:47:52 +0200 [thread overview]
Message-ID: <1413816472-1895-6-git-send-email-javier.martinez@collabora.co.uk> (raw)
In-Reply-To: <1413816472-1895-1-git-send-email-javier.martinez@collabora.co.uk>
The regulator core now has support to choose if a regulator
has to be enabled or disabled during system suspend and also
the max77802 driver supports changing the regulator operating
mode during runtime and when the system enters into sleep mode.
To lower power during suspend, configure the regulators state
using the same configuration found in the ChromeOS 3.8 kernel.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---
Changes since v2:
- Use the standard suspend state binding as suggested by Mark Brown.
arch/arm/boot/dts/exynos5420-peach-pit.dts | 81 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/exynos5800-peach-pi.dts | 81 ++++++++++++++++++++++++++++++
2 files changed, 162 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 9a050e1..8b744c7 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -13,6 +13,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/maxim,max77802.h>
+#include <dt-bindings/regulator/maxim,max77802.h>
#include "exynos5420.dtsi"
/ {
@@ -192,6 +193,9 @@
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck2_reg: BUCK2 {
@@ -201,6 +205,9 @@
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck3_reg: BUCK3 {
@@ -210,6 +217,9 @@
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck4_reg: BUCK4 {
@@ -219,6 +229,9 @@
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck5_reg: BUCK5 {
@@ -227,6 +240,9 @@
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck6_reg: BUCK6 {
@@ -236,6 +252,9 @@
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck7_reg: BUCK7 {
@@ -244,6 +263,9 @@
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
buck8_reg: BUCK8 {
@@ -252,6 +274,9 @@
regulator-max-microvolt = <2850000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck9_reg: BUCK9 {
@@ -260,6 +285,9 @@
regulator-max-microvolt = <2000000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
buck10_reg: BUCK10 {
@@ -268,6 +296,9 @@
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo1_reg: LDO1 {
@@ -275,6 +306,10 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
ldo2_reg: LDO2 {
@@ -288,6 +323,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
vqmmc_sdcard: ldo4_reg: LDO4 {
@@ -295,6 +334,9 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo5_reg: LDO5 {
@@ -302,6 +344,9 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo6_reg: LDO6 {
@@ -309,6 +354,9 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo7_reg: LDO7 {
@@ -322,6 +370,9 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo9_reg: LDO9 {
@@ -329,6 +380,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
ldo10_reg: LDO10 {
@@ -336,6 +391,9 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo11_reg: LDO11 {
@@ -343,6 +401,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
ldo12_reg: LDO12 {
@@ -350,6 +412,9 @@
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo13_reg: LDO13 {
@@ -357,6 +422,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
ldo14_reg: LDO14 {
@@ -364,6 +433,9 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo15_reg: LDO15 {
@@ -371,6 +443,9 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo17_reg: LDO17 {
@@ -378,6 +453,9 @@
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo18_reg: LDO18 {
@@ -451,6 +529,9 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo32_reg: LDO32 {
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index e8fdda8..df7fbde 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -13,6 +13,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/maxim,max77802.h>
+#include <dt-bindings/regulator/maxim,max77802.h>
#include "exynos5800.dtsi"
/ {
@@ -191,6 +192,9 @@
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck2_reg: BUCK2 {
@@ -200,6 +204,9 @@
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck3_reg: BUCK3 {
@@ -209,6 +216,9 @@
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck4_reg: BUCK4 {
@@ -218,6 +228,9 @@
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck5_reg: BUCK5 {
@@ -226,6 +239,9 @@
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck6_reg: BUCK6 {
@@ -235,6 +251,9 @@
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck7_reg: BUCK7 {
@@ -243,6 +262,9 @@
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
buck8_reg: BUCK8 {
@@ -251,6 +273,9 @@
regulator-max-microvolt = <2850000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck9_reg: BUCK9 {
@@ -259,6 +284,9 @@
regulator-max-microvolt = <2000000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
buck10_reg: BUCK10 {
@@ -267,6 +295,9 @@
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo1_reg: LDO1 {
@@ -274,6 +305,10 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
ldo2_reg: LDO2 {
@@ -287,6 +322,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
vqmmc_sdcard: ldo4_reg: LDO4 {
@@ -294,6 +333,9 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo5_reg: LDO5 {
@@ -301,6 +343,9 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo6_reg: LDO6 {
@@ -308,6 +353,9 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo7_reg: LDO7 {
@@ -321,6 +369,9 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo9_reg: LDO9 {
@@ -328,6 +379,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
ldo10_reg: LDO10 {
@@ -335,6 +390,9 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo11_reg: LDO11 {
@@ -342,6 +400,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
ldo12_reg: LDO12 {
@@ -349,6 +411,9 @@
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo13_reg: LDO13 {
@@ -356,6 +421,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
ldo14_reg: LDO14 {
@@ -363,6 +432,9 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo15_reg: LDO15 {
@@ -370,6 +442,9 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo17_reg: LDO17 {
@@ -377,6 +452,9 @@
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo18_reg: LDO18 {
@@ -450,6 +528,9 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo32_reg: LDO32 {
--
2.1.0
prev parent reply other threads:[~2014-10-20 14:49 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-20 14:47 [PATCH v3 0/5] Add max77802 regulator operating mode support Javier Martinez Canillas
2014-10-20 14:47 ` [PATCH v3 1/5] regulator: of: Decrement refcount for suspend state nodes Javier Martinez Canillas
2014-10-22 16:38 ` Mark Brown
2014-10-20 14:47 ` [PATCH v3 2/5] regulator: core: Add regulator mode and initial mode properties Javier Martinez Canillas
2014-10-20 14:47 ` [PATCH v3 3/5] regulator: max77802: Document regulator operating modes Javier Martinez Canillas
2014-10-20 14:47 ` [PATCH v3 4/5] regulator: max77802: Parse regulator operating mode properties Javier Martinez Canillas
2014-10-22 16:48 ` Mark Brown
2014-10-23 9:28 ` Javier Martinez Canillas
2014-10-24 21:02 ` Mark Brown
2014-10-26 23:24 ` Javier Martinez Canillas
2014-10-20 14:47 ` Javier Martinez Canillas [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1413816472-1895-6-git-send-email-javier.martinez@collabora.co.uk \
--to=javier.martinez@collabora.co.uk \
--cc=broonie@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=k.kozlowski@samsung.com \
--cc=kesavan.abhilash@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=olof@lixom.net \
--cc=zyw@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®