From: Alex Williamson <alex.williamson@redhat.com>
To: Antonios Motakis <a.motakis@virtualopensystems.com>
Cc: kvmarm@lists.cs.columbia.edu, iommu@lists.linux-foundation.org,
will.deacon@arm.com, tech@virtualopensystems.com,
christoffer.dall@linaro.org, eric.auger@linaro.org,
kim.phillips@freescale.com, marc.zyngier@arm.com,
Bjorn Helgaas <bhelgaas@google.com>,
Alexander Gordeev <agordeev@redhat.com>,
"open list:VFIO DRIVER" <kvm@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v9 15/19] vfio: add local lock in virqfd instead of depending on VFIO PCI
Date: Fri, 31 Oct 2014 13:43:03 -0600 [thread overview]
Message-ID: <1414784583.27420.330.camel@ul30vt.home> (raw)
In-Reply-To: <1414433284-31719-16-git-send-email-a.motakis@virtualopensystems.com>
On Mon, 2014-10-27 at 19:08 +0100, Antonios Motakis wrote:
> Virqfd just needs to keep accesses to any struct *virqfd safe, but this
> comes into play only when creating or destroying eventfds, so sharing
> the same spinlock with the VFIO bus driver is not necessary.
>
> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
> ---
> drivers/vfio/pci/vfio_pci_intrs.c | 10 +++++-----
> drivers/vfio/virqfd.c | 24 +++++++++++++-----------
> include/linux/vfio.h | 3 +--
> 3 files changed, 19 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
> index 3f909bb..e56c814 100644
> --- a/drivers/vfio/pci/vfio_pci_intrs.c
> +++ b/drivers/vfio/pci/vfio_pci_intrs.c
> @@ -226,8 +226,8 @@ static int vfio_intx_set_signal(struct vfio_pci_device *vdev, int fd)
> static void vfio_intx_disable(struct vfio_pci_device *vdev)
> {
> vfio_intx_set_signal(vdev, -1);
> - virqfd_disable(vdev, &vdev->ctx[0].unmask);
> - virqfd_disable(vdev, &vdev->ctx[0].mask);
> + virqfd_disable(&vdev->ctx[0].unmask);
> + virqfd_disable(&vdev->ctx[0].mask);
> vdev->irq_type = VFIO_PCI_NUM_IRQS;
> vdev->num_ctx = 0;
> kfree(vdev->ctx);
> @@ -377,8 +377,8 @@ static void vfio_msi_disable(struct vfio_pci_device *vdev, bool msix)
> vfio_msi_set_block(vdev, 0, vdev->num_ctx, NULL, msix);
>
> for (i = 0; i < vdev->num_ctx; i++) {
> - virqfd_disable(vdev, &vdev->ctx[i].unmask);
> - virqfd_disable(vdev, &vdev->ctx[i].mask);
> + virqfd_disable(&vdev->ctx[i].unmask);
> + virqfd_disable(&vdev->ctx[i].mask);
> }
>
> if (msix) {
> @@ -415,7 +415,7 @@ static int vfio_pci_set_intx_unmask(struct vfio_pci_device *vdev,
> vfio_send_intx_eventfd, NULL,
> &vdev->ctx[0].unmask, fd);
>
> - virqfd_disable(vdev, &vdev->ctx[0].unmask);
> + virqfd_disable(&vdev->ctx[0].unmask);
> }
>
> return 0;
> diff --git a/drivers/vfio/virqfd.c b/drivers/vfio/virqfd.c
> index 243eb61..27fa2f0 100644
> --- a/drivers/vfio/virqfd.c
> +++ b/drivers/vfio/virqfd.c
> @@ -17,6 +17,7 @@
> #include "pci/vfio_pci_private.h"
>
> static struct workqueue_struct *vfio_irqfd_cleanup_wq;
> +static spinlock_t lock;
Define this as:
DEFINE_SPINLOCK(lock);
and we can avoid needing the init.
> int __init vfio_pci_virqfd_init(void)
> {
> @@ -25,6 +26,8 @@ int __init vfio_pci_virqfd_init(void)
> if (!vfio_irqfd_cleanup_wq)
> return -ENOMEM;
>
> + spin_lock_init(&lock);
> +
> return 0;
> }
>
> @@ -53,21 +56,21 @@ static int virqfd_wakeup(wait_queue_t *wait, unsigned mode, int sync, void *key)
>
> if (flags & POLLHUP) {
> unsigned long flags;
> - spin_lock_irqsave(&virqfd->vdev->irqlock, flags);
> + spin_lock_irqsave(&lock, flags);
>
> /*
> * The eventfd is closing, if the virqfd has not yet been
> * queued for release, as determined by testing whether the
> - * vdev pointer to it is still valid, queue it now. As
> + * virqfd pointer to it is still valid, queue it now. As
> * with kvm irqfds, we know we won't race against the virqfd
> - * going away because we hold wqh->lock to get here.
> + * going away because we hold the lock to get here.
> */
> if (*(virqfd->pvirqfd) == virqfd) {
> *(virqfd->pvirqfd) = NULL;
> virqfd_deactivate(virqfd);
> }
>
> - spin_unlock_irqrestore(&virqfd->vdev->irqlock, flags);
> + spin_unlock_irqrestore(&lock, flags);
> }
>
> return 0;
> @@ -143,16 +146,16 @@ int virqfd_enable(struct vfio_pci_device *vdev,
> * we update the pointer to the virqfd under lock to avoid
> * pushing multiple jobs to release the same virqfd.
> */
> - spin_lock_irq(&vdev->irqlock);
> + spin_lock_irq(&lock);
>
> if (*pvirqfd) {
> - spin_unlock_irq(&vdev->irqlock);
> + spin_unlock_irq(&lock);
> ret = -EBUSY;
> goto err_busy;
> }
> *pvirqfd = virqfd;
>
> - spin_unlock_irq(&vdev->irqlock);
> + spin_unlock_irq(&lock);
>
> /*
> * Install our own custom wake-up handling so we are notified via
> @@ -190,19 +193,18 @@ err_fd:
> }
> EXPORT_SYMBOL_GPL(virqfd_enable);
>
> -void virqfd_disable(struct vfio_pci_device *vdev,
> - struct virqfd **pvirqfd)
> +void virqfd_disable(struct virqfd **pvirqfd)
> {
> unsigned long flags;
>
> - spin_lock_irqsave(&vdev->irqlock, flags);
> + spin_lock_irqsave(&lock, flags);
>
> if (*pvirqfd) {
> virqfd_deactivate(*pvirqfd);
> *pvirqfd = NULL;
> }
>
> - spin_unlock_irqrestore(&vdev->irqlock, flags);
> + spin_unlock_irqrestore(&lock, flags);
>
> /*
> * Block until we know all outstanding shutdown jobs have completed.
> diff --git a/include/linux/vfio.h b/include/linux/vfio.h
> index a077c48..fb6037b 100644
> --- a/include/linux/vfio.h
> +++ b/include/linux/vfio.h
> @@ -146,7 +146,6 @@ extern int virqfd_enable(struct vfio_pci_device *vdev,
> int (*handler)(struct vfio_pci_device *, void *),
> void (*thread)(struct vfio_pci_device *, void *),
> void *data, struct virqfd **pvirqfd, int fd);
> -extern void virqfd_disable(struct vfio_pci_device *vdev,
> - struct virqfd **pvirqfd);
> +extern void virqfd_disable(struct virqfd **pvirqfd);
>
> #endif /* VFIO_H */
next prev parent reply other threads:[~2014-10-31 19:43 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1414433284-31719-1-git-send-email-a.motakis@virtualopensystems.com>
2014-10-27 18:07 ` [PATCH v9 01/19] vfio/platform: initial skeleton of VFIO support for platform devices Antonios Motakis
[not found] ` <546330DE.5010002@linaro.org>
2014-11-12 16:49 ` Alex Williamson
2014-11-20 14:10 ` Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 02/19] vfio: platform: probe to devices on the platform bus Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 03/19] vfio: platform: add the VFIO PLATFORM module to Kconfig Antonios Motakis
2014-11-12 9:52 ` Hongbo Zhang
2014-11-12 9:57 ` Antonios Motakis
2014-11-13 8:05 ` Hongbo Zhang
2014-11-20 14:10 ` Antonios Motakis
[not found] ` <CAOhR-w2N3SF=3DTgFr22JfAKDXxzz0PASznJaRjK3oBrRTVcsw@mail.gmail.com>
[not found] ` <d3c4a63eaa294f1987a797a39eed4650@BN3PR0301MB1265.namprd03.prod.outlook.com>
2014-11-12 10:38 ` Hongbo Zhang
2014-11-12 11:00 ` Bharat.Bhushan
2014-11-12 11:17 ` Hongbo Zhang
2014-10-27 18:07 ` [PATCH v9 04/19] vfio: amba: VFIO support for AMBA devices Antonios Motakis
2014-10-31 18:40 ` Alex Williamson
2014-11-05 9:50 ` Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 05/19] vfio: amba: add the VFIO for AMBA devices module to Kconfig Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 06/19] vfio/platform: return info for bound device Antonios Motakis
[not found] ` <5463373C.2010202@linaro.org>
2014-11-12 16:36 ` Alex Williamson
2014-11-20 14:10 ` Antonios Motakis
2014-11-20 14:26 ` Eric Auger
2014-10-27 18:07 ` [PATCH v9 07/19] vfio/platform: return info for device memory mapped IO regions Antonios Motakis
2014-10-31 18:58 ` Alex Williamson
2014-11-05 9:50 ` Antonios Motakis
[not found] ` <54633D5B.4040204@linaro.org>
2014-11-20 14:11 ` Antonios Motakis
2014-11-24 15:53 ` Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 08/19] vfio/platform: read and write support for the device fd Antonios Motakis
[not found] ` <546380DD.8000802@linaro.org>
2014-11-20 14:11 ` Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 09/19] vfio/platform: support MMAP of MMIO regions Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 10/19] vfio/platform: return IRQ info Antonios Motakis
2014-10-31 19:11 ` Alex Williamson
2014-11-05 10:04 ` Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 11/19] vfio/platform: initial interrupts support code Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 12/19] vfio/platform: trigger an interrupt via eventfd Antonios Motakis
2014-10-31 19:36 ` Alex Williamson
2014-11-05 10:08 ` Antonios Motakis
[not found] ` <54636D25.6060009@linaro.org>
2014-11-20 14:11 ` Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 13/19] vfio/platform: support for level sensitive interrupts Antonios Motakis
2014-10-31 19:36 ` Alex Williamson
2014-11-05 10:10 ` Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 14/19] vfio: move eventfd support code for VFIO_PCI to a separate file Antonios Motakis
2014-10-27 19:16 ` Bjorn Helgaas
2014-10-31 16:03 ` Antonios Motakis
2014-10-27 18:08 ` [PATCH v9 15/19] vfio: add local lock in virqfd instead of depending on VFIO PCI Antonios Motakis
2014-10-31 19:43 ` Alex Williamson [this message]
2014-11-05 10:04 ` Antonios Motakis
2014-10-27 18:08 ` [PATCH v9 16/19] vfio: pass an opaque pointer on virqfd initialization Antonios Motakis
2014-10-27 18:08 ` [PATCH v9 17/19] vfio: virqfd: add vfio_ prefix to virqfd_enable and virqfd_disable Antonios Motakis
2014-10-27 20:12 ` Bjorn Helgaas
2014-10-31 16:06 ` Antonios Motakis
2014-10-27 18:08 ` [PATCH v9 18/19] vfio: initialize the virqfd workqueue in VFIO generic code Antonios Motakis
2014-10-27 18:08 ` [PATCH v9 19/19] vfio/platform: implement IRQ masking/unmasking via an eventfd Antonios Motakis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414784583.27420.330.camel@ul30vt.home \
--to=alex.williamson@redhat.com \
--cc=a.motakis@virtualopensystems.com \
--cc=agordeev@redhat.com \
--cc=bhelgaas@google.com \
--cc=christoffer.dall@linaro.org \
--cc=eric.auger@linaro.org \
--cc=iommu@lists.linux-foundation.org \
--cc=kim.phillips@freescale.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=tech@virtualopensystems.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®