From: Alex Williamson <alex.williamson@redhat.com>
To: Eric Auger <eric.auger@linaro.org>
Cc: Antonios Motakis <a.motakis@virtualopensystems.com>,
kvmarm@lists.cs.columbia.edu, iommu@lists.linux-foundation.org,
will.deacon@arm.com, tech@virtualopensystems.com,
christoffer.dall@linaro.org, kim.phillips@freescale.com,
marc.zyngier@arm.com, VFIO DRIVER <kvm@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v9 06/19] vfio/platform: return info for bound device
Date: Wed, 12 Nov 2014 09:36:08 -0700 [thread overview]
Message-ID: <1415810168.16601.353.camel@ul30vt.home> (raw)
In-Reply-To: <5463373C.2010202@linaro.org>
On Wed, 2014-11-12 at 11:32 +0100, Eric Auger wrote:
> On 10/27/2014 07:07 PM, Antonios Motakis wrote:
> > A VFIO userspace driver will start by opening the VFIO device
> > that corresponds to an IOMMU group, and will use the ioctl interface
> > to get the basic device info, such as number of memory regions and
> > interrupts, and their properties. This patch enables the
> > VFIO_DEVICE_GET_INFO ioctl call.
> >
> > Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
> > ---
> > drivers/vfio/platform/vfio_platform_common.c | 23 ++++++++++++++++++++---
> > 1 file changed, 20 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
> > index e0fdbc8..cb20526 100644
> > --- a/drivers/vfio/platform/vfio_platform_common.c
> > +++ b/drivers/vfio/platform/vfio_platform_common.c
> > @@ -43,10 +43,27 @@ static int vfio_platform_open(void *device_data)
> > static long vfio_platform_ioctl(void *device_data,
> > unsigned int cmd, unsigned long arg)
> > {
> > - if (cmd == VFIO_DEVICE_GET_INFO)
> > - return -EINVAL;
> > + struct vfio_platform_device *vdev = device_data;
> > + unsigned long minsz;
> > +
> > + if (cmd == VFIO_DEVICE_GET_INFO) {
> > + struct vfio_device_info info;
> > +
> > + minsz = offsetofend(struct vfio_device_info, num_irqs);
> > +
> > + if (copy_from_user(&info, (void __user *)arg, minsz))
> > + return -EFAULT;
> > +
> > + if (info.argsz < minsz)
> > + return -EINVAL;
> > +
> > + info.flags = vdev->flags;
> > + info.num_regions = 0;
> > + info.num_irqs = 0;
> Seems a bit weird to me to enable the modality but returning zeroed
> values. Shouldn't we put that patch after VFIO_DEVICE_GET_REGION_INFO
> and VFIO_DEVICE_GET_IRQ_INFO ones?
I actually like how Antonios has started from a base framework, exposing
a device but none of the resources and then incrementally adds each
component. It's also a good showcase of the VFIO ABI that we can do
things like this. Thanks,
Alex
next prev parent reply other threads:[~2014-11-12 16:36 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1414433284-31719-1-git-send-email-a.motakis@virtualopensystems.com>
2014-10-27 18:07 ` [PATCH v9 01/19] vfio/platform: initial skeleton of VFIO support for platform devices Antonios Motakis
[not found] ` <546330DE.5010002@linaro.org>
2014-11-12 16:49 ` Alex Williamson
2014-11-20 14:10 ` Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 02/19] vfio: platform: probe to devices on the platform bus Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 03/19] vfio: platform: add the VFIO PLATFORM module to Kconfig Antonios Motakis
2014-11-12 9:52 ` Hongbo Zhang
2014-11-12 9:57 ` Antonios Motakis
2014-11-13 8:05 ` Hongbo Zhang
2014-11-20 14:10 ` Antonios Motakis
[not found] ` <CAOhR-w2N3SF=3DTgFr22JfAKDXxzz0PASznJaRjK3oBrRTVcsw@mail.gmail.com>
[not found] ` <d3c4a63eaa294f1987a797a39eed4650@BN3PR0301MB1265.namprd03.prod.outlook.com>
2014-11-12 10:38 ` Hongbo Zhang
2014-11-12 11:00 ` Bharat.Bhushan
2014-11-12 11:17 ` Hongbo Zhang
2014-10-27 18:07 ` [PATCH v9 04/19] vfio: amba: VFIO support for AMBA devices Antonios Motakis
2014-10-31 18:40 ` Alex Williamson
2014-11-05 9:50 ` Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 05/19] vfio: amba: add the VFIO for AMBA devices module to Kconfig Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 06/19] vfio/platform: return info for bound device Antonios Motakis
[not found] ` <5463373C.2010202@linaro.org>
2014-11-12 16:36 ` Alex Williamson [this message]
2014-11-20 14:10 ` Antonios Motakis
2014-11-20 14:26 ` Eric Auger
2014-10-27 18:07 ` [PATCH v9 07/19] vfio/platform: return info for device memory mapped IO regions Antonios Motakis
2014-10-31 18:58 ` Alex Williamson
2014-11-05 9:50 ` Antonios Motakis
[not found] ` <54633D5B.4040204@linaro.org>
2014-11-20 14:11 ` Antonios Motakis
2014-11-24 15:53 ` Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 08/19] vfio/platform: read and write support for the device fd Antonios Motakis
[not found] ` <546380DD.8000802@linaro.org>
2014-11-20 14:11 ` Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 09/19] vfio/platform: support MMAP of MMIO regions Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 10/19] vfio/platform: return IRQ info Antonios Motakis
2014-10-31 19:11 ` Alex Williamson
2014-11-05 10:04 ` Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 11/19] vfio/platform: initial interrupts support code Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 12/19] vfio/platform: trigger an interrupt via eventfd Antonios Motakis
2014-10-31 19:36 ` Alex Williamson
2014-11-05 10:08 ` Antonios Motakis
[not found] ` <54636D25.6060009@linaro.org>
2014-11-20 14:11 ` Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 13/19] vfio/platform: support for level sensitive interrupts Antonios Motakis
2014-10-31 19:36 ` Alex Williamson
2014-11-05 10:10 ` Antonios Motakis
2014-10-27 18:07 ` [PATCH v9 14/19] vfio: move eventfd support code for VFIO_PCI to a separate file Antonios Motakis
2014-10-27 19:16 ` Bjorn Helgaas
2014-10-31 16:03 ` Antonios Motakis
2014-10-27 18:08 ` [PATCH v9 15/19] vfio: add local lock in virqfd instead of depending on VFIO PCI Antonios Motakis
2014-10-31 19:43 ` Alex Williamson
2014-11-05 10:04 ` Antonios Motakis
2014-10-27 18:08 ` [PATCH v9 16/19] vfio: pass an opaque pointer on virqfd initialization Antonios Motakis
2014-10-27 18:08 ` [PATCH v9 17/19] vfio: virqfd: add vfio_ prefix to virqfd_enable and virqfd_disable Antonios Motakis
2014-10-27 20:12 ` Bjorn Helgaas
2014-10-31 16:06 ` Antonios Motakis
2014-10-27 18:08 ` [PATCH v9 18/19] vfio: initialize the virqfd workqueue in VFIO generic code Antonios Motakis
2014-10-27 18:08 ` [PATCH v9 19/19] vfio/platform: implement IRQ masking/unmasking via an eventfd Antonios Motakis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415810168.16601.353.camel@ul30vt.home \
--to=alex.williamson@redhat.com \
--cc=a.motakis@virtualopensystems.com \
--cc=christoffer.dall@linaro.org \
--cc=eric.auger@linaro.org \
--cc=iommu@lists.linux-foundation.org \
--cc=kim.phillips@freescale.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=tech@virtualopensystems.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®