* [PATCH 1/3] dts-binding: input: sun7ips2: Device tree bindings for Allwinner sun7i A20 PS2 host controller
@ 2014-12-03 22:40 vishnupatekar
0 siblings, 0 replies; only message in thread
From: vishnupatekar @ 2014-12-03 22:40 UTC (permalink / raw)
To: maxime.ripard, galak, ijc+devicetree, mark.rutland, pawel.moll, robh+dt
Cc: devicetree, linux-arm-kernel, linux-kernel, vishnupatekar
---
.../bindings/input/allwinner,sun7i-a20-ps2.txt | 22 ++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/allwinner,sun7i-a20-ps2.txt
diff --git a/Documentation/devicetree/bindings/input/allwinner,sun7i-a20-ps2.txt b/Documentation/devicetree/bindings/input/allwinner,sun7i-a20-ps2.txt
new file mode 100644
index 0000000..63b6214
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/allwinner,sun7i-a20-ps2.txt
@@ -0,0 +1,22 @@
+* Device tree bindings for Allwinner A20 PS2 host controller
+
+A20 PS2 is dual role controller(PS2 host and PS2 device). These bindings are for PS2 host controller.
+IBM compliant IBM PS2 and AT-compatible keyboard and mouse can be connected.
+
+Required properties:
+
+ - reg : Offset and length of the register set for the device.
+ - compatible : Should one of the following:
+ - "allwinner,sun7i-a20-ps2"
+ - interrupts : The interrupt line connected to the P2WI peripheral.
+ - clocks : The gate clk connected to the P2WI peripheral.
+
+
+Example:
+ ps20: ps2@0x01c2a000 {
+ compatible = "allwinner,sun7i-a20-ps2";
+ reg = <0x01c2a000 0x400>;
+ interrupts = <0 62 4>;
+ clocks = <&apb1_gates 6>;
+ status = "disabled";
+ };
--
1.7.9.5
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2014-12-03 22:41 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-12-03 22:40 [PATCH 1/3] dts-binding: input: sun7ips2: Device tree bindings for Allwinner sun7i A20 PS2 host controller vishnupatekar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®