From: Yunzhi Li <lyz@rock-chips.com>
To: heiko@sntech.de, dianders@chromium.org
Cc: olof@lixom.net, huangtao@rock-chips.com,
ulrich.prinz@googlemail.com, zyw@rock-chips.com,
cf@rock-chips.com, linux-rockchip@lists.infradead.org,
Yunzhi Li <lyz@rock-chips.com>,
Paul Zimmerman <paulz@synopsys.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/5] usb: dwc2: Add generic PHY framework support for dwc2 usb controler platform driver.
Date: Fri, 5 Dec 2014 20:52:19 +0800 [thread overview]
Message-ID: <1417783941-2418-4-git-send-email-lyz@rock-chips.com> (raw)
In-Reply-To: <1417783941-2418-1-git-send-email-lyz@rock-chips.com>
Get PHY parameters from devicetree and power off usb PHY during
system suspend.
Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
---
drivers/usb/dwc2/gadget.c | 33 ++++++++++++---------------------
drivers/usb/dwc2/platform.c | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 46 insertions(+), 21 deletions(-)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 200168e..2601c61 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3410,8 +3410,6 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
{
struct device *dev = hsotg->dev;
struct s3c_hsotg_plat *plat = dev->platform_data;
- struct phy *phy;
- struct usb_phy *uphy;
struct s3c_hsotg_ep *eps;
int epnum;
int ret;
@@ -3421,30 +3419,23 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
hsotg->phyif = GUSBCFG_PHYIF16;
/*
- * Attempt to find a generic PHY, then look for an old style
- * USB PHY, finally fall back to pdata
+ * If platform probe couldn't find a generic PHY or an old style
+ * USB PHY, fall back to pdata
*/
- phy = devm_phy_get(dev, "usb2-phy");
- if (IS_ERR(phy)) {
- uphy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
- if (IS_ERR(uphy)) {
- /* Fallback for pdata */
- plat = dev_get_platdata(dev);
- if (!plat) {
- dev_err(dev,
- "no platform data or transceiver defined\n");
- return -EPROBE_DEFER;
- }
- hsotg->plat = plat;
- } else
- hsotg->uphy = uphy;
- } else {
- hsotg->phy = phy;
+ if (IS_ERR_OR_NULL(hsotg->phy) && IS_ERR_OR_NULL(hsotg->uphy)) {
+ plat = dev_get_platdata(dev);
+ if (!plat) {
+ dev_err(dev,
+ "no platform data or transceiver defined\n");
+ return -EPROBE_DEFER;
+ }
+ hsotg->plat = plat;
+ } else if (hsotg->phy) {
/*
* If using the generic PHY framework, check if the PHY bus
* width is 8-bit and set the phyif appropriately.
*/
- if (phy_get_bus_width(phy) == 8)
+ if (phy_get_bus_width(hsotg->phy) == 8)
hsotg->phyif = GUSBCFG_PHYIF8;
}
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 6a795aa..739d14f 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -155,6 +155,8 @@ static int dwc2_driver_probe(struct platform_device *dev)
struct dwc2_core_params defparams;
struct dwc2_hsotg *hsotg;
struct resource *res;
+ struct phy *phy;
+ struct usb_phy *uphy;
int retval;
int irq;
@@ -212,6 +214,24 @@ static int dwc2_driver_probe(struct platform_device *dev)
hsotg->dr_mode = of_usb_get_dr_mode(dev->dev.of_node);
+ /*
+ * Attempt to find a generic PHY, then look for an old style
+ * USB PHY
+ */
+ phy = devm_phy_get(&dev->dev, "usb2-phy");
+ if (IS_ERR(phy)) {
+ hsotg->phy = NULL;
+ uphy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
+ if (IS_ERR(uphy))
+ hsotg->uphy = NULL;
+ else
+ hsotg->uphy = uphy;
+ } else {
+ hsotg->phy = phy;
+ phy_power_on(hsotg->phy);
+ phy_init(hsotg->phy);
+ }
+
spin_lock_init(&hsotg->lock);
mutex_init(&hsotg->init_mutex);
retval = dwc2_gadget_init(hsotg, irq);
@@ -233,6 +253,14 @@ static int __maybe_unused dwc2_suspend(struct device *dev)
if (dwc2_is_device_mode(dwc2))
ret = s3c_hsotg_suspend(dwc2);
+ else {
+ if (dwc2->lx_state == DWC2_L0)
+ return 0;
+ if (dwc2->phy) {
+ phy_exit(dwc2->phy);
+ phy_power_off(dwc2->phy);
+ }
+ }
return ret;
}
@@ -243,6 +271,12 @@ static int __maybe_unused dwc2_resume(struct device *dev)
if (dwc2_is_device_mode(dwc2))
ret = s3c_hsotg_resume(dwc2);
+ else {
+ if (dwc2->phy) {
+ phy_power_on(dwc2->phy);
+ phy_init(dwc2->phy);
+ }
+ }
return ret;
}
--
2.0.0
next prev parent reply other threads:[~2014-12-05 12:53 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-05 12:52 [PATCH v2 0/5] Yunzhi Li
2014-12-05 12:52 ` [PATCH v2 1/5] phy: add a driver for the Rockchip SoC internal USB2.0 PHY Yunzhi Li
2014-12-05 13:38 ` Romain Perier
2014-12-08 4:12 ` Yunzhi Li
2014-12-05 12:52 ` [PATCH v2 2/5] Documentation: bindings: add doc for the Rockchip usb PHY Yunzhi Li
2014-12-05 12:52 ` Yunzhi Li [this message]
2014-12-05 19:04 ` [PATCH v2 3/5] usb: dwc2: Add generic PHY framework support for dwc2 usb controler platform driver Paul Zimmerman
2014-12-08 3:58 ` Yunzhi Li
2014-12-08 19:46 ` Paul Zimmerman
2014-12-05 12:52 ` [PATCH v2 4/5] ARM: dts: add rk3288 usb PHY Yunzhi Li
2014-12-05 13:47 ` Romain Perier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417783941-2418-4-git-send-email-lyz@rock-chips.com \
--to=lyz@rock-chips.com \
--cc=cf@rock-chips.com \
--cc=dianders@chromium.org \
--cc=gregkh@linuxfoundation.org \
--cc=heiko@sntech.de \
--cc=huangtao@rock-chips.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=olof@lixom.net \
--cc=paulz@synopsys.com \
--cc=ulrich.prinz@googlemail.com \
--cc=zyw@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®