Re: [PATCH v2 3/5] usb: dwc2: Add generic PHY framework support for dwc2 usb controler platform driver.

[Yunzhi Li <lyz@rock-chips.com>]

Hi Paul:

Thank you for replying.

On 2014/12/6 3:04, Paul Zimmerman wrote:
>> From: Yunzhi Li [mailto:lyz@rock-chips.com]
>> Sent: Friday, December 05, 2014 4:52 AM
>>
>> Get PHY parameters from devicetree and power off usb PHY during
>> system suspend.
>>
>> Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
>> ---
>>
>>   drivers/usb/dwc2/gadget.c   | 33 ++++++++++++---------------------
>>   drivers/usb/dwc2/platform.c | 34 ++++++++++++++++++++++++++++++++++
>>   2 files changed, 46 insertions(+), 21 deletions(-)
>>
>> diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
>> index 200168e..2601c61 100644
>> --- a/drivers/usb/dwc2/gadget.c
>> +++ b/drivers/usb/dwc2/gadget.c
>> [...]
>>
>>   	/*
>> -	 * Attempt to find a generic PHY, then look for an old style
>> -	 * USB PHY, finally fall back to pdata
>> +	 * If platform probe couldn't find a generic PHY or an old style
>> +	 * USB PHY, fall back to pdata
>>   	 */
>> -	phy = devm_phy_get(dev, "usb2-phy");
>> -	if (IS_ERR(phy)) {
>> -		uphy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
>> -		if (IS_ERR(uphy)) {
>> -			/* Fallback for pdata */
>> -			plat = dev_get_platdata(dev);
>> -			if (!plat) {
>> -				dev_err(dev,
>> -				"no platform data or transceiver defined\n");
>> -				return -EPROBE_DEFER;
>> -			}
>> -			hsotg->plat = plat;
>> -		} else
>> -			hsotg->uphy = uphy;
>> -	} else {
>> -		hsotg->phy = phy;
>> +	if (IS_ERR_OR_NULL(hsotg->phy) && IS_ERR_OR_NULL(hsotg->uphy)) {
>> +		plat = dev_get_platdata(dev);
>> +		if (!plat) {
>> +			dev_err(dev,
>> +			"no platform data or transceiver defined\n");
>> +			return -EPROBE_DEFER;
>> +		}
>> +		hsotg->plat = plat;
>> +	} else if (hsotg->phy) {
> You have changed the behavior here. Previously, the driver would work
> even if there were no phys or pdata defined. Now it will return
> -EPROBE_DEFER instead. Are you sure that won't break any existing
> platforms?
>
I don't really catch your meaning. Could you please point out where is 
the difference? Thanks .

In previous version, if there were no phy or usb_phy defined, 
devm_phy_get() and devm_usb_get_phy() both failed, then driver falls 
back to find pdata, if no pdata defined dev_get_platdata() returns NULL, 
then dwc2_gadget_init returns -EPROBE_DEFER and the dwc2_driver_probe 
fail. So I think, for the dwc2 driver without my patch, when 
CONFIG_USB_DWC2_PERIPHERAL or CONFIG_USB_DWC2_DUAL_ROLE selected, if 
there were no phys or pdata defined, the driver probe will also return 
-EPROBE_DEFER. And when only CONFIG_USB_DWC2_HOST selected, the previous 
version driver didn't care any thing about phy, in my patch it will try 
to find a phy when platform driver probe, but do not fail probe if there 
isn't a phy node.