mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Chanwoo Choi <cw00.choi@samsung.com>
To: myungjoo.ham@samsung.com
Cc: kgene.kim@samsung.com, kyungmin.park@samsung.com,
	rafael.j.wysocki@intel.com, mark.rutland@arm.com,
	a.kesavan@samsung.com, tomasz.figa@gmail.com,
	k.kozlowski@samsung.com, b.zolnierkie@samsung.com,
	cw00.choi@samsung.com, inki.dae@samsung.com,
	linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org,
	Sylwester Nawrocki <s.nawrocki@samsung.com>
Subject: [RFC PATCHv2 4/8] clk: samsung: exynos4: Add divider clock id for memory bus frequency
Date: Wed, 31 Dec 2014 14:19:48 +0900	[thread overview]
Message-ID: <1420003192-5576-5-git-send-email-cw00.choi@samsung.com> (raw)
In-Reply-To: <1420003192-5576-1-git-send-email-cw00.choi@samsung.com>

This patch adds the divider clock id for Exynos4 memory bus frequency.
The clock id is used fo DVFS (Dynamic Voltage/Frequency Scaling)
feature of exynos memory bus frequency.

Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/clk/samsung/clk-exynos4.c   | 10 +++++-----
 include/dt-bindings/clock/exynos4.h |  7 ++++++-
 2 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index 88e8c6b..51462e8 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -703,12 +703,12 @@ static struct samsung_mux_clock exynos4x12_mux_clks[] __initdata = {
 
 /* list of divider clocks supported in all exynos4 soc's */
 static struct samsung_div_clock exynos4_div_clks[] __initdata = {
-	DIV(0, "div_gdl", "mout_gdl", DIV_LEFTBUS, 0, 3),
+	DIV(CLK_DIV_GDL, "div_gdl", "mout_gdl", DIV_LEFTBUS, 0, 3),
 	DIV(0, "div_gpl", "div_gdl", DIV_LEFTBUS, 4, 3),
 	DIV(0, "div_clkout_leftbus", "mout_clkout_leftbus",
 			CLKOUT_CMU_LEFTBUS, 8, 6),
 
-	DIV(0, "div_gdr", "mout_gdr", DIV_RIGHTBUS, 0, 3),
+	DIV(CLK_DIV_GDR, "div_gdr", "mout_gdr", DIV_RIGHTBUS, 0, 3),
 	DIV(0, "div_gpr", "div_gdr", DIV_RIGHTBUS, 4, 3),
 	DIV(0, "div_clkout_rightbus", "mout_clkout_rightbus",
 			CLKOUT_CMU_RIGHTBUS, 8, 6),
@@ -781,10 +781,10 @@ static struct samsung_div_clock exynos4_div_clks[] __initdata = {
 			CLK_SET_RATE_PARENT, 0),
 	DIV(0, "div_clkout_top", "mout_clkout_top", CLKOUT_CMU_TOP, 8, 6),
 
-	DIV(0, "div_acp", "mout_dmc_bus", DIV_DMC0, 0, 3),
+	DIV(CLK_DIV_ACP, "div_acp", "mout_dmc_bus", DIV_DMC0, 0, 3),
 	DIV(0, "div_acp_pclk", "div_acp", DIV_DMC0, 4, 3),
 	DIV(0, "div_dphy", "mout_dphy", DIV_DMC0, 8, 3),
-	DIV(0, "div_dmc", "mout_dmc_bus", DIV_DMC0, 12, 3),
+	DIV(CLK_DIV_DMC, "div_dmc", "mout_dmc_bus", DIV_DMC0, 12, 3),
 	DIV(0, "div_dmcd", "div_dmc", DIV_DMC0, 16, 3),
 	DIV(0, "div_dmcp", "div_dmcd", DIV_DMC0, 20, 3),
 	DIV(0, "div_pwi", "mout_pwi", DIV_DMC1, 8, 4),
@@ -829,7 +829,7 @@ static struct samsung_div_clock exynos4x12_div_clks[] __initdata = {
 	DIV_F(CLK_DIV_MCUISP1, "div_mcuisp1", "div_mcuisp0", E4X12_DIV_ISP1,
 						8, 3, CLK_GET_RATE_NOCACHE, 0),
 	DIV(CLK_SCLK_FIMG2D, "sclk_fimg2d", "mout_g2d", DIV_DMC1, 0, 4),
-	DIV(0, "div_c2c", "mout_c2c", DIV_DMC1, 4, 3),
+	DIV(CLK_DIV_C2C, "div_c2c", "mout_c2c", DIV_DMC1, 4, 3),
 	DIV(0, "div_c2c_aclk", "div_c2c", DIV_DMC1, 12, 3),
 };
 
diff --git a/include/dt-bindings/clock/exynos4.h b/include/dt-bindings/clock/exynos4.h
index 34fe28c..c4b1676 100644
--- a/include/dt-bindings/clock/exynos4.h
+++ b/include/dt-bindings/clock/exynos4.h
@@ -262,8 +262,13 @@
 #define CLK_DIV_MCUISP1		453 /* Exynos4x12 only */
 #define CLK_DIV_ACLK200		454 /* Exynos4x12 only */
 #define CLK_DIV_ACLK400_MCUISP	455 /* Exynos4x12 only */
+#define CLK_DIV_ACP		456
+#define CLK_DIV_DMC		457
+#define CLK_DIV_C2C		458 /* Exynos4x12 only */
+#define CLK_DIV_GDL		459
+#define CLK_DIV_GDR		460
 
 /* must be greater than maximal clock id */
-#define CLK_NR_CLKS		456
+#define CLK_NR_CLKS		461
 
 #endif /* _DT_BINDINGS_CLOCK_EXYNOS_4_H */
-- 
1.8.5.5


  parent reply	other threads:[~2014-12-31  5:22 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-31  5:19 [RFC PATCHv2 0/8] devfreq: Add generic exynos memory-bus frequency driver Chanwoo Choi
2014-12-31  5:19 ` [RFC PATCHv2 1/8] devfreq: exynos: Add generic exynos memory bus " Chanwoo Choi
2014-12-31  5:19 ` [RFC PATCHv2 2/8] devfreq: exynos: Add documentation for " Chanwoo Choi
2014-12-31  5:19 ` [RFC PATCHv2 3/8] ARM: dts: Add memory bus node for Exynos3250 Chanwoo Choi
2014-12-31  5:19 ` Chanwoo Choi [this message]
2014-12-31  5:19 ` [RFC PATCHv2 5/8] ARM: dts: Add memory bus node for Exynos4x12 Chanwoo Choi
2014-12-31  5:19 ` [RFC PATCHv2 6/8] ARM: dts: Add memory bus node for Exynos4210 Chanwoo Choi
2014-12-31  5:19 ` [RFC PATCHv2 7/8] ARM: dts: Add memory bus node for Exynos3250-based Rinato board Chanwoo Choi
2014-12-31  5:19 ` [RFC PATCHv2 8/8] ARM: dts: Add memory bus node for Exynos4412-based TRATS2 board Chanwoo Choi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1420003192-5576-5-git-send-email-cw00.choi@samsung.com \
    --to=cw00.choi@samsung.com \
    --cc=a.kesavan@samsung.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=inki.dae@samsung.com \
    --cc=k.kozlowski@samsung.com \
    --cc=kgene.kim@samsung.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=rafael.j.wysocki@intel.com \
    --cc=s.nawrocki@samsung.com \
    --cc=tomasz.figa@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®