From: Chanwoo Choi <cw00.choi@samsung.com>
To: myungjoo.ham@samsung.com
Cc: kgene.kim@samsung.com, kyungmin.park@samsung.com,
rafael.j.wysocki@intel.com, mark.rutland@arm.com,
a.kesavan@samsung.com, tomasz.figa@gmail.com,
k.kozlowski@samsung.com, b.zolnierkie@samsung.com,
cw00.choi@samsung.com, inki.dae@samsung.com,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Subject: [RFC PATCHv2 6/8] ARM: dts: Add memory bus node for Exynos4210
Date: Wed, 31 Dec 2014 14:19:50 +0900 [thread overview]
Message-ID: <1420003192-5576-7-git-send-email-cw00.choi@samsung.com> (raw)
In-Reply-To: <1420003192-5576-1-git-send-email-cw00.choi@samsung.com>
This patch adds the memory bus node for Exynos4210 SoC. Exynos4210 SoC has
one memory bus to translate data between DRAM and eMMC/sub-IPs because
Exynos4210 must need only one regulator for memory bus.
Following list specifies the detailed relation between memory bus clock and
sub-IPs:
- DMC/ACP clock : DMC (Dynamic Memory Controller)
- ACLK200 clock : LCD0
- ACLK100 clock : PERIL/PERIR/MFC(PCLK)
- ACLK160 clock : CAM/TV/LCD0/LCD1
- ACLK133 clock : FSYS/GPS
- GDL/GDR clock : leftbus/rightbus
- SCLK_MFC clock : MFC
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Myungjoo Ham <myungjoo.ham@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
arch/arm/boot/dts/exynos4210.dtsi | 93 +++++++++++++++++++++++++++++++++++++++
1 file changed, 93 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index b2598de..c039409 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -48,6 +48,99 @@
};
};
+ memory_bus: memory_bus@0 {
+ compatible = "samsung,exynos-memory-bus";
+
+ operating-points = <
+ 400000 1150000
+ 267000 1050000
+ 133000 1025000>;
+ status = "disabled";
+
+ blocks {
+ dmc_block: memory_bus_block1 {
+ clocks = <&clock CLK_DIV_DMC>;
+ clock-names = "memory-bus";
+ frequency = <
+ 400000
+ 267000
+ 133000>;
+ };
+
+ acp_block: memory_bus_block2 {
+ clocks = <&clock CLK_DIV_ACP>;
+ clock-names = "memory-bus";
+ frequency = <
+ 200000
+ 160000
+ 133000>;
+ };
+
+ peri_block: memory_bus_block3 {
+ clocks = <&clock CLK_ACLK100>;
+ clock-names = "memory-bus";
+ frequency = <
+ 100000
+ 100000
+ 100000>;
+ };
+
+ fsys_block: memory_bus_block4 {
+ clocks = <&clock CLK_ACLK133>;
+ clock-names = "memory-bus";
+ frequency = <
+ 133000
+ 133000
+ 100000>;
+ };
+
+ display_block: memory_bus_block5 {
+ clocks = <&clock CLK_ACLK160>;
+ clock-names = "memory-bus";
+ frequency = <
+ 160000
+ 133000
+ 100000>;
+ };
+
+ lcd0_block: memory_bus_block6 {
+ clocks = <&clock CLK_ACLK200>;
+ clock-names = "memory-bus";
+ frequency = <
+ 200000
+ 160000
+ 100000>;
+ };
+
+ leftbus_block: memory_bus_block7 {
+ clocks = <&clock CLK_DIV_GDL>;
+ clock-names = "memory-bus";
+ frequency = <
+ 200000
+ 160000
+ 100000>;
+ };
+
+ rightbus_block: memory_bus_block8 {
+ clocks = <&clock CLK_DIV_GDR>;
+ clock-names = "memory-bus";
+ frequency = <
+ 200000
+ 160000
+ 100000>;
+ };
+
+ mfc_block: memory_bus_block9 {
+ clocks = <&clock CLK_SCLK_MFC>;
+ clock-names = "memory-bus";
+ frequency = <
+ 200000
+ 160000
+ 100000>;
+ };
+ };
+ };
+
pmu_system_controller: system-controller@10020000 {
clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
"clkout4", "clkout8", "clkout9";
--
1.8.5.5
next prev parent reply other threads:[~2014-12-31 5:20 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-31 5:19 [RFC PATCHv2 0/8] devfreq: Add generic exynos memory-bus frequency driver Chanwoo Choi
2014-12-31 5:19 ` [RFC PATCHv2 1/8] devfreq: exynos: Add generic exynos memory bus " Chanwoo Choi
2014-12-31 5:19 ` [RFC PATCHv2 2/8] devfreq: exynos: Add documentation for " Chanwoo Choi
2014-12-31 5:19 ` [RFC PATCHv2 3/8] ARM: dts: Add memory bus node for Exynos3250 Chanwoo Choi
2014-12-31 5:19 ` [RFC PATCHv2 4/8] clk: samsung: exynos4: Add divider clock id for memory bus frequency Chanwoo Choi
2014-12-31 5:19 ` [RFC PATCHv2 5/8] ARM: dts: Add memory bus node for Exynos4x12 Chanwoo Choi
2014-12-31 5:19 ` Chanwoo Choi [this message]
2014-12-31 5:19 ` [RFC PATCHv2 7/8] ARM: dts: Add memory bus node for Exynos3250-based Rinato board Chanwoo Choi
2014-12-31 5:19 ` [RFC PATCHv2 8/8] ARM: dts: Add memory bus node for Exynos4412-based TRATS2 board Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1420003192-5576-7-git-send-email-cw00.choi@samsung.com \
--to=cw00.choi@samsung.com \
--cc=a.kesavan@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=inki.dae@samsung.com \
--cc=k.kozlowski@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=myungjoo.ham@samsung.com \
--cc=rafael.j.wysocki@intel.com \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®