From: Xunlei Pang <xlpang@126.com>
To: linux-kernel@vger.kernel.org,
John Stultz <john.stultz@linaro.org>,
Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: rtc-linux@googlegroups.com, Thomas Gleixner <tglx@linutronix.de>,
Alessandro Zummo <a.zummo@towertech.it>,
Xunlei Pang <pang.xunlei@linaro.org>
Subject: [RFC PATCH v2 5/9] rtc/mc13xxx: Update driver to address y2038/y2106 issues
Date: Tue, 13 Jan 2015 23:44:53 +0800 [thread overview]
Message-ID: <1421163897-8020-6-git-send-email-xlpang@126.com> (raw)
In-Reply-To: <1421163897-8020-1-git-send-email-xlpang@126.com>
From: Xunlei Pang <pang.xunlei@linaro.org>
This driver has a number of y2038/y2106 issues.
This patch resolves them by:
- Replace rtc_time_to_tm() with rtc_time64_to_tm()
- Change mc13xxx_rtc_set_mmss() to use rtc_class_ops's set_mmss64()
After this patch, the driver should not have any remaining
y2038/y2106 issues.
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
---
drivers/rtc/rtc-mc13xxx.c | 32 ++++++++++++++------------------
1 file changed, 14 insertions(+), 18 deletions(-)
diff --git a/drivers/rtc/rtc-mc13xxx.c b/drivers/rtc/rtc-mc13xxx.c
index 5bce904b..32df1d8 100644
--- a/drivers/rtc/rtc-mc13xxx.c
+++ b/drivers/rtc/rtc-mc13xxx.c
@@ -83,20 +83,19 @@ static int mc13xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
return ret;
} while (days1 != days2);
- rtc_time_to_tm(days1 * SEC_PER_DAY + seconds, tm);
+ rtc_time64_to_tm((time64_t)days1 * SEC_PER_DAY + seconds, tm);
return rtc_valid_tm(tm);
}
-static int mc13xxx_rtc_set_mmss(struct device *dev, unsigned long secs)
+static int mc13xxx_rtc_set_mmss(struct device *dev, time64_t secs)
{
struct mc13xxx_rtc *priv = dev_get_drvdata(dev);
unsigned int seconds, days;
unsigned int alarmseconds;
int ret;
- seconds = secs % SEC_PER_DAY;
- days = secs / SEC_PER_DAY;
+ days = div_s64_rem(secs, SEC_PER_DAY, &seconds);
mc13xxx_lock(priv->mc13xxx);
@@ -159,7 +158,7 @@ static int mc13xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
struct mc13xxx_rtc *priv = dev_get_drvdata(dev);
unsigned seconds, days;
- unsigned long s1970;
+ time64_t s1970;
int enabled, pending;
int ret;
@@ -189,10 +188,10 @@ out:
alarm->enabled = enabled;
alarm->pending = pending;
- s1970 = days * SEC_PER_DAY + seconds;
+ s1970 = (time64_t)days * SEC_PER_DAY + seconds;
- rtc_time_to_tm(s1970, &alarm->time);
- dev_dbg(dev, "%s: %lu\n", __func__, s1970);
+ rtc_time64_to_tm(s1970, &alarm->time);
+ dev_dbg(dev, "%s: %lld\n", __func__, (long long)s1970);
return 0;
}
@@ -200,8 +199,8 @@ out:
static int mc13xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
struct mc13xxx_rtc *priv = dev_get_drvdata(dev);
- unsigned long s1970;
- unsigned seconds, days;
+ time64_t s1970;
+ u32 seconds, days;
int ret;
mc13xxx_lock(priv->mc13xxx);
@@ -215,20 +214,17 @@ static int mc13xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
if (unlikely(ret))
goto out;
- ret = rtc_tm_to_time(&alarm->time, &s1970);
- if (unlikely(ret))
- goto out;
+ s1970 = rtc_tm_to_time64(&alarm->time);
- dev_dbg(dev, "%s: o%2.s %lu\n", __func__, alarm->enabled ? "n" : "ff",
- s1970);
+ dev_dbg(dev, "%s: o%2.s %lld\n", __func__, alarm->enabled ? "n" : "ff",
+ (long long)s1970);
ret = mc13xxx_rtc_irq_enable_unlocked(dev, alarm->enabled,
MC13XXX_IRQ_TODA);
if (unlikely(ret))
goto out;
- seconds = s1970 % SEC_PER_DAY;
- days = s1970 / SEC_PER_DAY;
+ days = div_s64_rem(s1970, SEC_PER_DAY, &seconds);
ret = mc13xxx_reg_write(priv->mc13xxx, MC13XXX_RTCDAYA, days);
if (unlikely(ret))
@@ -268,7 +264,7 @@ static irqreturn_t mc13xxx_rtc_update_handler(int irq, void *dev)
static const struct rtc_class_ops mc13xxx_rtc_ops = {
.read_time = mc13xxx_rtc_read_time,
- .set_mmss = mc13xxx_rtc_set_mmss,
+ .set_mmss64 = mc13xxx_rtc_set_mmss,
.read_alarm = mc13xxx_rtc_read_alarm,
.set_alarm = mc13xxx_rtc_set_alarm,
.alarm_irq_enable = mc13xxx_rtc_alarm_irq_enable,
--
1.9.1
next prev parent reply other threads:[~2015-01-13 15:51 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-13 15:44 [RFC PATCH v2 0/9] Provide y2038/y2106 safe rtc_class_ops.set_mmss64() Xunlei Pang
2015-01-13 15:44 ` [RFC PATCH v2 1/9] rtc: Provide y2038 safe rtc_class_ops.set_mmss() replacement Xunlei Pang
2015-01-13 16:12 ` Alessandro Zummo
2015-01-13 15:44 ` [RFC PATCH v2 2/9] time: Provide y2106 safe get_seconds() replacement Xunlei Pang
2015-01-13 16:17 ` Alessandro Zummo
2015-01-13 20:34 ` Arnd Bergmann
2015-01-13 20:42 ` Thomas Gleixner
2015-01-14 14:52 ` Xunlei Pang
2015-01-13 15:44 ` [RFC PATCH v2 3/9] rtc/test: Update driver to address y2038/y2106 issues Xunlei Pang
2015-01-13 16:19 ` Alessandro Zummo
2015-01-14 14:56 ` Xunlei Pang
2015-01-14 15:03 ` Alessandro Zummo
2015-01-14 15:26 ` Xunlei Pang
2015-01-14 15:39 ` Alessandro Zummo
2015-01-16 15:40 ` Xunlei Pang
2015-01-13 15:44 ` [RFC PATCH v2 4/9] rtc/ab3100: " Xunlei Pang
2015-01-13 16:20 ` Alessandro Zummo
2015-01-15 17:23 ` Linus Walleij
2015-01-13 15:44 ` Xunlei Pang [this message]
2015-01-14 15:07 ` [RFC PATCH v2 5/9] rtc/mc13xxx: " Xunlei Pang
2015-01-14 17:03 ` Uwe Kleine-König
2015-01-13 15:44 ` [RFC PATCH v2 6/9] rtc/mxc: Modify rtc_update_alarm() not to touch the alarm time Xunlei Pang
2015-01-13 16:23 ` Alessandro Zummo
2015-01-14 15:13 ` Xunlei Pang
2015-01-13 15:44 ` [RFC PATCH v2 7/9] rtc/mxc: Convert get_alarm_or_time()/set_alarm_or_time() to use time64_t Xunlei Pang
2015-01-13 15:44 ` [RFC PATCH v2 8/9] rtc/mxc: Update driver to address y2038/y2106 issues Xunlei Pang
2015-01-13 15:44 ` [RFC PATCH v2 9/9] alpha: change to use rtc_class_ops's set_mmss64() Xunlei Pang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421163897-8020-6-git-send-email-xlpang@126.com \
--to=xlpang@126.com \
--cc=a.zummo@towertech.it \
--cc=arnd.bergmann@linaro.org \
--cc=john.stultz@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pang.xunlei@linaro.org \
--cc=rtc-linux@googlegroups.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®