From: Xunlei Pang <xlpang@126.com>
To: linux-kernel@vger.kernel.org,
John Stultz <john.stultz@linaro.org>,
Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: rtc-linux@googlegroups.com, Thomas Gleixner <tglx@linutronix.de>,
Alessandro Zummo <a.zummo@towertech.it>,
Xunlei Pang <pang.xunlei@linaro.org>
Subject: [RFC PATCH v2 6/9] rtc/mxc: Modify rtc_update_alarm() not to touch the alarm time
Date: Tue, 13 Jan 2015 23:44:54 +0800 [thread overview]
Message-ID: <1421163897-8020-7-git-send-email-xlpang@126.com> (raw)
In-Reply-To: <1421163897-8020-1-git-send-email-xlpang@126.com>
From: Xunlei Pang <pang.xunlei@linaro.org>
rtc_class_ops's set_alarm() shouldn't deal with the alarm date,
as this is handled in the rtc core.
See rtc_dev_ioctl()'s RTC_ALM_SET and RTC_WKALM_SET cases.
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
---
drivers/rtc/rtc-mxc.c | 22 ++++------------------
1 file changed, 4 insertions(+), 18 deletions(-)
diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c
index 3c3f8d1..a7b218f 100644
--- a/drivers/rtc/rtc-mxc.c
+++ b/drivers/rtc/rtc-mxc.c
@@ -173,29 +173,18 @@ static void set_alarm_or_time(struct device *dev, int time_alarm, u32 time)
* This function updates the RTC alarm registers and then clears all the
* interrupt status bits.
*/
-static int rtc_update_alarm(struct device *dev, struct rtc_time *alrm)
+static void rtc_update_alarm(struct device *dev, struct rtc_time *alrm)
{
- struct rtc_time alarm_tm, now_tm;
- unsigned long now, time;
+ unsigned long time;
struct platform_device *pdev = to_platform_device(dev);
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
void __iomem *ioaddr = pdata->ioaddr;
- now = get_alarm_or_time(dev, MXC_RTC_TIME);
- rtc_time_to_tm(now, &now_tm);
- alarm_tm.tm_year = now_tm.tm_year;
- alarm_tm.tm_mon = now_tm.tm_mon;
- alarm_tm.tm_mday = now_tm.tm_mday;
- alarm_tm.tm_hour = alrm->tm_hour;
- alarm_tm.tm_min = alrm->tm_min;
- alarm_tm.tm_sec = alrm->tm_sec;
- rtc_tm_to_time(&alarm_tm, &time);
+ rtc_tm_to_time(alrm, &time);
/* clear all the interrupt status bits */
writew(readw(ioaddr + RTC_RTCISR), ioaddr + RTC_RTCISR);
set_alarm_or_time(dev, MXC_RTC_ALARM, time);
-
- return 0;
}
static void mxc_rtc_irq_enable(struct device *dev, unsigned int bit,
@@ -346,11 +335,8 @@ static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct platform_device *pdev = to_platform_device(dev);
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
- int ret;
- ret = rtc_update_alarm(dev, &alrm->time);
- if (ret)
- return ret;
+ rtc_update_alarm(dev, &alrm->time);
memcpy(&pdata->g_rtc_alarm, &alrm->time, sizeof(struct rtc_time));
mxc_rtc_irq_enable(dev, RTC_ALM_BIT, alrm->enabled);
--
1.9.1
next prev parent reply other threads:[~2015-01-13 15:46 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-13 15:44 [RFC PATCH v2 0/9] Provide y2038/y2106 safe rtc_class_ops.set_mmss64() Xunlei Pang
2015-01-13 15:44 ` [RFC PATCH v2 1/9] rtc: Provide y2038 safe rtc_class_ops.set_mmss() replacement Xunlei Pang
2015-01-13 16:12 ` Alessandro Zummo
2015-01-13 15:44 ` [RFC PATCH v2 2/9] time: Provide y2106 safe get_seconds() replacement Xunlei Pang
2015-01-13 16:17 ` Alessandro Zummo
2015-01-13 20:34 ` Arnd Bergmann
2015-01-13 20:42 ` Thomas Gleixner
2015-01-14 14:52 ` Xunlei Pang
2015-01-13 15:44 ` [RFC PATCH v2 3/9] rtc/test: Update driver to address y2038/y2106 issues Xunlei Pang
2015-01-13 16:19 ` Alessandro Zummo
2015-01-14 14:56 ` Xunlei Pang
2015-01-14 15:03 ` Alessandro Zummo
2015-01-14 15:26 ` Xunlei Pang
2015-01-14 15:39 ` Alessandro Zummo
2015-01-16 15:40 ` Xunlei Pang
2015-01-13 15:44 ` [RFC PATCH v2 4/9] rtc/ab3100: " Xunlei Pang
2015-01-13 16:20 ` Alessandro Zummo
2015-01-15 17:23 ` Linus Walleij
2015-01-13 15:44 ` [RFC PATCH v2 5/9] rtc/mc13xxx: " Xunlei Pang
2015-01-14 15:07 ` Xunlei Pang
2015-01-14 17:03 ` Uwe Kleine-König
2015-01-13 15:44 ` Xunlei Pang [this message]
2015-01-13 16:23 ` [RFC PATCH v2 6/9] rtc/mxc: Modify rtc_update_alarm() not to touch the alarm time Alessandro Zummo
2015-01-14 15:13 ` Xunlei Pang
2015-01-13 15:44 ` [RFC PATCH v2 7/9] rtc/mxc: Convert get_alarm_or_time()/set_alarm_or_time() to use time64_t Xunlei Pang
2015-01-13 15:44 ` [RFC PATCH v2 8/9] rtc/mxc: Update driver to address y2038/y2106 issues Xunlei Pang
2015-01-13 15:44 ` [RFC PATCH v2 9/9] alpha: change to use rtc_class_ops's set_mmss64() Xunlei Pang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421163897-8020-7-git-send-email-xlpang@126.com \
--to=xlpang@126.com \
--cc=a.zummo@towertech.it \
--cc=arnd.bergmann@linaro.org \
--cc=john.stultz@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pang.xunlei@linaro.org \
--cc=rtc-linux@googlegroups.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®