mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Boris Brezillon <boris.brezillon@free-electrons.com>,
	Bo Shen <voice.shen@atmel.com>,
	Wenyou Yang <Wenyou.Yang@atmel.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subject: [PATCH 10/17] ARM: at91: merge SOC_AT91SAM9xxx
Date: Thu, 15 Jan 2015 22:58:13 +0100	[thread overview]
Message-ID: <1421359100-8930-11-git-send-email-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <1421359100-8930-1-git-send-email-alexandre.belloni@free-electrons.com>

Only use SOC_AT91SAM9 for all the at91sam9 SoCs.

It enables HAVE_AT91_SMD and HAVE_AT91_UTMI for all the sam9 SoCs but this only
represents 96 bytes of uncompressed kernel code.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/configs/at91_dt_defconfig | 10 +----
 arch/arm/mach-at91/Kconfig         | 92 +++++++++++---------------------------
 2 files changed, 27 insertions(+), 75 deletions(-)

diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 8116d122e098..811e72bbe642 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -15,15 +15,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_AT91RM9200=y
-CONFIG_SOC_AT91SAM9260=y
-CONFIG_SOC_AT91SAM9261=y
-CONFIG_SOC_AT91SAM9263=y
-CONFIG_SOC_AT91SAM9RL=y
-CONFIG_SOC_AT91SAM9G45=y
-CONFIG_SOC_AT91SAM9X5=y
-CONFIG_SOC_AT91SAM9N12=y
-CONFIG_MACH_AT91RM9200_DT=y
-CONFIG_MACH_AT91SAM9_DT=y
+CONFIG_SOC_AT91SAM9=y
 CONFIG_AT91_TIMER_HZ=128
 CONFIG_AEABI=y
 CONFIG_UACCESS_WITH_MEMCPY=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index c6956b863b9d..c6740e359a44 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -16,15 +16,6 @@ config HAVE_AT91_SMD
 config HAVE_AT91_H32MX
 	bool
 
-config SOC_AT91SAM9
-	bool
-	select ATMEL_AIC_IRQ
-	select COMMON_CLK_AT91
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select MEMORY
-	select ATMEL_SDRAMC
-
 config SOC_SAMA5
 	bool
 	select ATMEL_AIC5_IRQ
@@ -92,67 +83,36 @@ config SOC_AT91RM9200
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_USB_CLK
 
-config SOC_AT91SAM9260
-	bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
-	select SOC_AT91SAM9
-	select HAVE_AT91_USB_CLK
-	help
-	  Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
-	  or AT91SAM9G20 SoC.
-
-config SOC_AT91SAM9261
-	bool "AT91SAM9261 or AT91SAM9G10"
-	select HAVE_FB_ATMEL
-	select SOC_AT91SAM9
-	select HAVE_AT91_USB_CLK
-	help
-	  Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
-
-config SOC_AT91SAM9263
-	bool "AT91SAM9263"
-	select HAVE_FB_ATMEL
-	select SOC_AT91SAM9
-	select HAVE_AT91_USB_CLK
-
-config SOC_AT91SAM9RL
-	bool "AT91SAM9RL"
-	select HAVE_FB_ATMEL
-	select SOC_AT91SAM9
-	select HAVE_AT91_UTMI
-
-config SOC_AT91SAM9G45
-	bool "AT91SAM9G45 or AT91SAM9M10 families"
-	select HAVE_FB_ATMEL
-	select SOC_AT91SAM9
-	select HAVE_AT91_UTMI
-	select HAVE_AT91_USB_CLK
-	help
-	  Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
-	  This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
-
-config SOC_AT91SAM9X5
-	bool "AT91SAM9x5 family"
-	select HAVE_FB_ATMEL
-	select SOC_AT91SAM9
-	select HAVE_AT91_UTMI
+config SOC_AT91SAM9
+	bool "AT91SAM9"
+	select ATMEL_AIC_IRQ
+	select ATMEL_SDRAMC
+	select COMMON_CLK_AT91
+	select CPU_ARM926T
+	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_SMD
 	select HAVE_AT91_USB_CLK
-	help
-	  Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
-	  This means that your SAM9 name finishes with a '5' (except if it is
-	  AT91SAM9G45!).
-	  This support covers AT91SAM9G15, AT91SAM9G25, AT91SAM9X25, AT91SAM9G35
-	  and AT91SAM9X35.
-
-config SOC_AT91SAM9N12
-	bool "AT91SAM9N12 family"
+	select HAVE_AT91_UTMI
 	select HAVE_FB_ATMEL
-	select SOC_AT91SAM9
-	select HAVE_AT91_USB_CLK
+	select MEMORY
 	help
-	  Select this if you are using Atmel's AT91SAM9N12 SoC.
-
-# ----------------------------------------------------------
+	  Select this if you are using one of those Atmel SoC:
+	    AT91SAM9260
+	    AT91SAM9261
+	    AT91SAM9263
+	    AT91SAM9G15
+	    AT91SAM9G20
+	    AT91SAM9G25
+	    AT91SAM9G35
+	    AT91SAM9G45
+	    AT91SAM9G46
+	    AT91SAM9M10
+	    AT91SAM9M11
+	    AT91SAM9N12
+	    AT91SAM9RL
+	    AT91SAM9X25
+	    AT91SAM9X35
+	    AT91SAM9XE
 endif # SOC_SAM_V4_V5
 
 comment "AT91 Feature Selections"
-- 
2.1.0


  parent reply	other threads:[~2015-01-15 22:02 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-15 21:58 [PATCH 00/17] AT91 cleanup for 3.20 #3 Alexandre Belloni
2015-01-15 21:58 ` [PATCH 01/17] ARM: at91: merge at91rm9200 files Alexandre Belloni
2015-01-15 21:58 ` [PATCH 02/17] ARM: at91: move sama5 specific code into per-soc files Alexandre Belloni
2015-01-15 21:58 ` [PATCH 03/17] ARM: at91:remove unused mach/system_rev.h Alexandre Belloni
2015-01-15 21:58 ` [PATCH 04/17] ARM: at91: fix sam9n12 and sam9x5 arm_pm_idle Alexandre Belloni
2015-01-15 21:58 ` [PATCH 05/17] ARM: at91: sam9: set arm_pm_idle from sam9_dt_device_init Alexandre Belloni
2015-01-15 21:58 ` [PATCH 06/17] ARM: at91: remove unused at91_ioremap_matrix and header Alexandre Belloni
2015-01-15 21:58 ` [PATCH 07/17] ARM: at91: remove unused _matrix.h headers Alexandre Belloni
2015-01-15 21:58 ` [PATCH 08/17] ARM: at91: stop using HAVE_AT91_DBGUx Alexandre Belloni
2015-01-20 10:34   ` Nicolas Ferre
2015-01-20 15:12     ` Alexandre Belloni
2015-01-15 21:58 ` [PATCH 09/17] ARM: at91: pm: remove warning to remove SOC_AT91SAM9263 usage Alexandre Belloni
2015-01-15 21:58 ` Alexandre Belloni [this message]
2015-01-22 10:22   ` [PATCH 10/17] ARM: at91: merge SOC_AT91SAM9xxx Nicolas Ferre
2015-01-22 16:36     ` Alexandre Belloni
2015-01-26 17:49   ` [PATCH v2] " Nicolas Ferre
2015-01-15 21:58 ` [PATCH 11/17] ARM: at91: remove at91_boot_soc Alexandre Belloni
2015-01-26 18:08   ` [PATCH v2] ARM: at91: at91rm9200: set idle and restart from rm9200_dt_device_init() Nicolas Ferre
2015-01-26 19:01     ` Alexandre Belloni
2015-01-15 21:58 ` [PATCH 12/17] ARM: at91: rework initialization for rm9200 based boards Alexandre Belloni
2015-01-15 21:58 ` [PATCH 13/17] ARM: at91: rework initialization for sam9 " Alexandre Belloni
2015-01-15 21:58 ` [PATCH 14/17] ARM: at91: rework initialization for sama5 " Alexandre Belloni
2015-01-15 21:58 ` [PATCH 15/17] ARM: at91: remove old setup Alexandre Belloni
2015-01-21 16:29   ` Nicolas Ferre
2015-01-21 20:40     ` Alexandre Belloni
2015-01-15 21:58 ` [PATCH 16/17] ARM: at91: mark const init data with __initconst instead of __initdata Alexandre Belloni
2015-01-15 21:58 ` [PATCH 17/17] ARM: at91: remove at91_dt_initialize Alexandre Belloni
2015-01-22 10:31 ` [PATCH 00/17] AT91 cleanup for 3.20 #3 Nicolas Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1421359100-8930-11-git-send-email-alexandre.belloni@free-electrons.com \
    --to=alexandre.belloni@free-electrons.com \
    --cc=Wenyou.Yang@atmel.com \
    --cc=arnd@arndb.de \
    --cc=boris.brezillon@free-electrons.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nicolas.ferre@atmel.com \
    --cc=plagnioj@jcrosoft.com \
    --cc=voice.shen@atmel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®