From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Arnd Bergmann <arnd@arndb.de>,
Boris Brezillon <boris.brezillon@free-electrons.com>,
Bo Shen <voice.shen@atmel.com>,
Wenyou Yang <Wenyou.Yang@atmel.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subject: [PATCH 02/17] ARM: at91: move sama5 specific code into per-soc files
Date: Thu, 15 Jan 2015 22:58:05 +0100 [thread overview]
Message-ID: <1421359100-8930-3-git-send-email-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <1421359100-8930-1-git-send-email-alexandre.belloni@free-electrons.com>
From: Arnd Bergmann <arnd@arndb.de>
The common board-dt-sama5 file no longer contains any shared
code, so we can just move the machine descriptors into the
per-soc files for further cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/Makefile | 3 --
arch/arm/mach-at91/board-dt-sama5.c | 60 -------------------------------------
arch/arm/mach-at91/sama5d3.c | 28 +++++++++++++----
arch/arm/mach-at91/sama5d4.c | 33 ++++++++++++++++++--
4 files changed, 54 insertions(+), 70 deletions(-)
delete mode 100644 arch/arm/mach-at91/board-dt-sama5.c
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index d89c2437ef10..4bce1fac680e 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -21,9 +21,6 @@ obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
# AT91SAM board with device-tree
obj-$(CONFIG_SOC_AT91SAM9) += board-dt-sam9.o
-# SAMA5 board with device-tree
-obj-$(CONFIG_SOC_SAMA5) += board-dt-sama5.o
-
# Power Management
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
deleted file mode 100644
index 44d372a22a29..000000000000
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Setup code for SAMA5 Evaluation Kits with Device Tree support
- *
- * Copyright (C) 2013 Atmel,
- * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/micrel_phy.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/phy.h>
-#include <linux/clk-provider.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "generic.h"
-
-static void __init sama5_dt_device_init(void)
-{
- at91_sam9260_pm_init();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *sama5_dt_board_compat[] __initconst = {
- "atmel,sama5",
- NULL
-};
-
-DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)")
- /* Maintainer: Atmel */
- .map_io = at91_map_io,
- .init_early = at91_dt_initialize,
- .init_machine = sama5_dt_device_init,
- .dt_compat = sama5_dt_board_compat,
-MACHINE_END
-
-static const char *sama5_alt_dt_board_compat[] __initconst = {
- "atmel,sama5d4",
- NULL
-};
-
-DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5 (Device Tree)")
- /* Maintainer: Atmel */
- .map_io = at91_alt_map_io,
- .init_early = at91_dt_initialize,
- .init_machine = sama5_dt_device_init,
- .dt_compat = sama5_alt_dt_board_compat,
- .l2c_aux_mask = ~0UL,
-MACHINE_END
diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c
index b7c64ca7107f..ecd35f135a9f 100644
--- a/arch/arm/mach-at91/sama5d3.c
+++ b/arch/arm/mach-at91/sama5d3.c
@@ -7,19 +7,18 @@
* Licensed under GPLv2 or later.
*/
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk/at91_pmc.h>
+#include <linux/init.h>
+#include <linux/of_platform.h>
-#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
#include <mach/sama5d3.h>
#include <mach/cpu.h>
#include "soc.h"
#include "generic.h"
-#include "sam9_smc.h"
/* --------------------------------------------------------------------
* AT91SAM9x5 processor initialization
@@ -27,3 +26,22 @@
AT91_SOC_START(sama5d3)
AT91_SOC_END
+
+static void __init sama5_dt_device_init(void)
+{
+ at91_sam9260_pm_init();
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *sama5_dt_board_compat[] __initconst = {
+ "atmel,sama5",
+ NULL
+};
+
+DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)")
+ /* Maintainer: Atmel */
+ .map_io = at91_map_io,
+ .init_early = at91_dt_initialize,
+ .init_machine = sama5_dt_device_init,
+ .dt_compat = sama5_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/sama5d4.c b/arch/arm/mach-at91/sama5d4.c
index fa127fb79221..68573cd9d8f9 100644
--- a/arch/arm/mach-at91/sama5d4.c
+++ b/arch/arm/mach-at91/sama5d4.c
@@ -10,17 +10,27 @@
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/clk/at91_pmc.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/micrel_phy.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/clk-provider.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
#include <mach/sama5d4.h>
#include <mach/cpu.h>
#include <mach/hardware.h>
#include "soc.h"
#include "generic.h"
-#include "sam9_smc.h"
/* --------------------------------------------------------------------
* Processor initialization
@@ -52,7 +62,6 @@ static struct map_desc at91_io_desc[] __initdata = {
},
};
-
static void __init sama5d4_map_io(void)
{
iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc));
@@ -61,3 +70,23 @@ static void __init sama5d4_map_io(void)
AT91_SOC_START(sama5d4)
.map_io = sama5d4_map_io,
AT91_SOC_END
+
+static void __init sama5d4_dt_device_init(void)
+{
+ at91_sam9260_pm_init();
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *sama5_alt_dt_board_compat[] __initconst = {
+ "atmel,sama5d4",
+ NULL
+};
+
+DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5 (Device Tree)")
+ /* Maintainer: Atmel */
+ .map_io = at91_alt_map_io,
+ .init_early = at91_dt_initialize,
+ .init_machine = sama5d4_dt_device_init,
+ .dt_compat = sama5_alt_dt_board_compat,
+ .l2c_aux_mask = ~0UL,
+MACHINE_END
--
2.1.0
next prev parent reply other threads:[~2015-01-15 21:59 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-15 21:58 [PATCH 00/17] AT91 cleanup for 3.20 #3 Alexandre Belloni
2015-01-15 21:58 ` [PATCH 01/17] ARM: at91: merge at91rm9200 files Alexandre Belloni
2015-01-15 21:58 ` Alexandre Belloni [this message]
2015-01-15 21:58 ` [PATCH 03/17] ARM: at91:remove unused mach/system_rev.h Alexandre Belloni
2015-01-15 21:58 ` [PATCH 04/17] ARM: at91: fix sam9n12 and sam9x5 arm_pm_idle Alexandre Belloni
2015-01-15 21:58 ` [PATCH 05/17] ARM: at91: sam9: set arm_pm_idle from sam9_dt_device_init Alexandre Belloni
2015-01-15 21:58 ` [PATCH 06/17] ARM: at91: remove unused at91_ioremap_matrix and header Alexandre Belloni
2015-01-15 21:58 ` [PATCH 07/17] ARM: at91: remove unused _matrix.h headers Alexandre Belloni
2015-01-15 21:58 ` [PATCH 08/17] ARM: at91: stop using HAVE_AT91_DBGUx Alexandre Belloni
2015-01-20 10:34 ` Nicolas Ferre
2015-01-20 15:12 ` Alexandre Belloni
2015-01-15 21:58 ` [PATCH 09/17] ARM: at91: pm: remove warning to remove SOC_AT91SAM9263 usage Alexandre Belloni
2015-01-15 21:58 ` [PATCH 10/17] ARM: at91: merge SOC_AT91SAM9xxx Alexandre Belloni
2015-01-22 10:22 ` Nicolas Ferre
2015-01-22 16:36 ` Alexandre Belloni
2015-01-26 17:49 ` [PATCH v2] " Nicolas Ferre
2015-01-15 21:58 ` [PATCH 11/17] ARM: at91: remove at91_boot_soc Alexandre Belloni
2015-01-26 18:08 ` [PATCH v2] ARM: at91: at91rm9200: set idle and restart from rm9200_dt_device_init() Nicolas Ferre
2015-01-26 19:01 ` Alexandre Belloni
2015-01-15 21:58 ` [PATCH 12/17] ARM: at91: rework initialization for rm9200 based boards Alexandre Belloni
2015-01-15 21:58 ` [PATCH 13/17] ARM: at91: rework initialization for sam9 " Alexandre Belloni
2015-01-15 21:58 ` [PATCH 14/17] ARM: at91: rework initialization for sama5 " Alexandre Belloni
2015-01-15 21:58 ` [PATCH 15/17] ARM: at91: remove old setup Alexandre Belloni
2015-01-21 16:29 ` Nicolas Ferre
2015-01-21 20:40 ` Alexandre Belloni
2015-01-15 21:58 ` [PATCH 16/17] ARM: at91: mark const init data with __initconst instead of __initdata Alexandre Belloni
2015-01-15 21:58 ` [PATCH 17/17] ARM: at91: remove at91_dt_initialize Alexandre Belloni
2015-01-22 10:31 ` [PATCH 00/17] AT91 cleanup for 3.20 #3 Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421359100-8930-3-git-send-email-alexandre.belloni@free-electrons.com \
--to=alexandre.belloni@free-electrons.com \
--cc=Wenyou.Yang@atmel.com \
--cc=arnd@arndb.de \
--cc=boris.brezillon@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
--cc=voice.shen@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®