Re: [PATCH net-next v2 2/9] net: ethernet: oa_tc6: implement mac-phy software reset

[<Parthiban.Veerasooran@microchip.com>]

Hi Andrew,

On 27/10/23 1:31 am, Andrew Lunn wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
>>>> +     ret = oa_tc6_perform_ctrl(tc6, STATUS0, &regval, 1, false, false);
>>>> +     if (ret)
>>>> +             return ret;
>>>> +
>>>> +     /* Check for reset complete interrupt status */
>>>> +     if (regval & RESETC) {
>>>> +             regval = RESETC;
>>>
>>> People don't always agree, but i found STATUS0_RESETC easier to see
>>> you have the correct bit for the register you just read.
>> Do you want me to define STATUS0_RESETC instead of RESETC or is my
>> understanding wrong?
> 
> Correct, STATUS0_RESETC. It avoids silly typos like:
> 
>       ret = oa_tc6_perform_ctrl(tc6, STATUS0, &regval, 1, false, false);
>       if (ret)
>               return ret;
> 
>       /* Check for reset complete interrupt status */
>       if (regval & RESET) {
>               regval = RESETC;
> 
> where RESET is a valid register name, but not a bit. Or say:
> 
>       ret = oa_tc6_perform_ctrl(tc6, STATUS0, &regval, 1, false, false);
>       if (ret)
>               return ret;
> 
>       /* Check for reset complete interrupt status */
>       if (regval & SWRESET) {
>               regval = STATUS0_;
> 
> where SWRESET is a valid bit, but not for STATUS0.
> 
> I've made silly mistakes like this, and learnt that good naming helps
> to avoid it.
Ok, thanks for the detailed explanation.

Best Regards,
Parthiban V

> 
>       Andrew