[PATCH 3/5] usb: phy: ab8500-usb: Rename regulator_set_optimum_mode

[Bjorn Andersson <bjorn.andersson@sonymobile.com>]

The function regulator_set_optimum_mode() is changing name to
regulator_set_load(), so update the code accordingly.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
 drivers/usb/phy/phy-ab8500-usb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index 0b1bd23..f5b3b92 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -277,7 +277,7 @@ static void ab8500_usb_regulator_enable(struct ab8500_usb *ab)
 			dev_err(ab->dev, "Failed to set the Vintcore to 1.3V, ret=%d\n",
 					ret);
 
-		ret = regulator_set_optimum_mode(ab->v_ulpi, 28000);
+		ret = regulator_set_load(ab->v_ulpi, 28000);
 		if (ret < 0)
 			dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n",
 					ret);
@@ -317,7 +317,7 @@ static void ab8500_usb_regulator_disable(struct ab8500_usb *ab)
 						ab->saved_v_ulpi, ret);
 		}
 
-		ret = regulator_set_optimum_mode(ab->v_ulpi, 0);
+		ret = regulator_set_load(ab->v_ulpi, 0);
 		if (ret < 0)
 			dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n",
 					ret);
-- 
1.8.2.2