Re: [PATCH 3/5] usb: phy: ab8500-usb: Rename regulator_set_optimum_mode

[Felipe Balbi <balbi@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 1419 bytes --]

On Wed, Feb 11, 2015 at 07:35:29PM -0800, Bjorn Andersson wrote:
> The function regulator_set_optimum_mode() is changing name to
> regulator_set_load(), so update the code accordingly.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>

since this depends on the rest of the series:

Acked-by: Felipe Balbi <balbi@ti.com>

> ---
>  drivers/usb/phy/phy-ab8500-usb.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
> index 0b1bd23..f5b3b92 100644
> --- a/drivers/usb/phy/phy-ab8500-usb.c
> +++ b/drivers/usb/phy/phy-ab8500-usb.c
> @@ -277,7 +277,7 @@ static void ab8500_usb_regulator_enable(struct ab8500_usb *ab)
>  			dev_err(ab->dev, "Failed to set the Vintcore to 1.3V, ret=%d\n",
>  					ret);
>  
> -		ret = regulator_set_optimum_mode(ab->v_ulpi, 28000);
> +		ret = regulator_set_load(ab->v_ulpi, 28000);
>  		if (ret < 0)
>  			dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n",
>  					ret);
> @@ -317,7 +317,7 @@ static void ab8500_usb_regulator_disable(struct ab8500_usb *ab)
>  						ab->saved_v_ulpi, ret);
>  		}
>  
> -		ret = regulator_set_optimum_mode(ab->v_ulpi, 0);
> +		ret = regulator_set_load(ab->v_ulpi, 0);
>  		if (ret < 0)
>  			dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n",
>  					ret);
> -- 
> 1.8.2.2
> 

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]