* [PATCH 1/2] toshiba_acpi: Cleanup comment blocks and capitalization
2015-02-12 5:57 toshiba_acpi: Cleanup comments and file header Darren Hart
@ 2015-02-12 5:57 ` Darren Hart
2015-02-12 5:57 ` [PATCH 2/2] toshiba_acpi: Cleanup GPL header Darren Hart
2015-02-12 16:02 ` toshiba_acpi: Cleanup comments and file header Azael Avalos
1 sibling, 1 reply; 4+ messages in thread
From: Darren Hart @ 2015-02-12 5:57 UTC (permalink / raw)
To: platform-driver-x86; +Cc: Linux Kernel Mailing List, coproscefalo, Darren Hart
Ensure multiline comments start with /* and */ each on its own line.
Capitalize the first word of comments.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
---
drivers/platform/x86/toshiba_acpi.c | 75 +++++++++++++++++++++++--------------
1 file changed, 47 insertions(+), 28 deletions(-)
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 1cfc443..07be889 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -71,7 +71,8 @@ MODULE_LICENSE("GPL");
/* Toshiba ACPI method paths */
#define METHOD_VIDEO_OUT "\\_SB_.VALX.DSSX"
-/* The Toshiba configuration interface is composed of the HCI and the SCI,
+/*
+ * The Toshiba configuration interface is composed of the HCI and the SCI,
* which are defined as follows:
*
* HCI is Toshiba's "Hardware Control Interface" which is supposed to
@@ -286,7 +287,8 @@ static const struct key_entry toshiba_acpi_alt_keymap[] = {
{ KE_END, 0 },
};
-/* utility
+/*
+ * Utility
*/
static inline void _set_bit(u32 *word, u32 mask, int value)
@@ -294,7 +296,8 @@ static inline void _set_bit(u32 *word, u32 mask, int value)
*word = (*word & ~mask) | (mask * value);
}
-/* acpi interface wrappers
+/*
+ * ACPI interface wrappers
*/
static int write_acpi_int(const char *methodName, int val)
@@ -305,7 +308,8 @@ static int write_acpi_int(const char *methodName, int val)
return (status == AE_OK) ? 0 : -EIO;
}
-/* Perform a raw configuration call. Here we don't care about input or output
+/*
+ * Perform a raw configuration call. Here we don't care about input or output
* buffer format.
*/
static acpi_status tci_raw(struct toshiba_acpi_dev *dev,
@@ -339,7 +343,8 @@ static acpi_status tci_raw(struct toshiba_acpi_dev *dev,
return status;
}
-/* common hci tasks (get or set one or two value)
+/*
+ * Common hci tasks (get or set one or two value)
*
* In addition to the ACPI status, the HCI system returns a result which
* may be useful (such as "not supported").
@@ -393,7 +398,8 @@ static u32 hci_read2(struct toshiba_acpi_dev *dev,
return out[0];
}
-/* common sci tasks
+/*
+ * Common sci tasks
*/
static int sci_open(struct toshiba_acpi_dev *dev)
@@ -414,7 +420,8 @@ static int sci_open(struct toshiba_acpi_dev *dev)
pr_info("Toshiba SCI already opened\n");
return 1;
} else if (out[0] == TOS_NOT_SUPPORTED) {
- /* Some BIOSes do not have the SCI open/close functions
+ /*
+ * Some BIOSes do not have the SCI open/close functions
* implemented and return 0x8000 (Not Supported), failing to
* register some supported features.
*
@@ -567,10 +574,11 @@ static int toshiba_kbd_illum_available(struct toshiba_acpi_dev *dev)
return 0;
}
- /* Check for keyboard backlight timeout max value,
+ /*
+ * Check for keyboard backlight timeout max value,
* previous kbd backlight implementation set this to
* 0x3c0003, and now the new implementation set this
- * to 0x3c001a, use this to distinguish between them
+ * to 0x3c001a, use this to distinguish between them.
*/
if (out[3] == SCI_KBD_TIME_MAX)
dev->kbd_type = 2;
@@ -714,7 +722,8 @@ static int toshiba_eco_mode_available(struct toshiba_acpi_dev *dev)
} else if (out[0] == TOS_NOT_INSTALLED) {
pr_info("ECO led not installed");
} else if (out[0] == TOS_INPUT_DATA_ERROR) {
- /* If we receive 0x8300 (Input Data Error), it means that the
+ /*
+ * If we receive 0x8300 (Input Data Error), it means that the
* LED device is present, but that we just screwed the input
* parameters.
*
@@ -776,7 +785,8 @@ static int toshiba_accelerometer_supported(struct toshiba_acpi_dev *dev)
u32 out[TCI_WORDS];
acpi_status status;
- /* Check if the accelerometer call exists,
+ /*
+ * Check if the accelerometer call exists,
* this call also serves as initialization
*/
status = tci_raw(dev, in, out);
@@ -1433,9 +1443,9 @@ static ssize_t video_proc_write(struct file *file, const char __user *buf,
buffer = cmd;
- /* scan expression. Multiple expressions may be delimited with ;
- *
- * NOTE: to keep scanning simple, invalid fields are ignored
+ /*
+ * Scan expression. Multiple expressions may be delimited with ;
+ * NOTE: To keep scanning simple, invalid fields are ignored.
*/
while (remain) {
if (sscanf(buffer, " lcd_out : %i", &value) == 1)
@@ -1444,7 +1454,7 @@ static ssize_t video_proc_write(struct file *file, const char __user *buf,
crt_out = value & 1;
else if (sscanf(buffer, " tv_out : %i", &value) == 1)
tv_out = value & 1;
- /* advance to one character past the next ; */
+ /* Advance to one character past the next ; */
do {
++buffer;
--remain;
@@ -1463,7 +1473,8 @@ static ssize_t video_proc_write(struct file *file, const char __user *buf,
_set_bit(&new_video_out, HCI_VIDEO_OUT_CRT, crt_out);
if (tv_out != -1)
_set_bit(&new_video_out, HCI_VIDEO_OUT_TV, tv_out);
- /* To avoid unnecessary video disruption, only write the new
+ /*
+ * To avoid unnecessary video disruption, only write the new
* video setting if something changed. */
if (new_video_out != video_out)
ret = write_acpi_int(METHOD_VIDEO_OUT, new_video_out);
@@ -1558,11 +1569,13 @@ static int keys_proc_show(struct seq_file *m, void *v)
dev->key_event_valid = 1;
dev->last_key_event = value;
} else if (hci_result == TOS_FIFO_EMPTY) {
- /* better luck next time */
+ /* Better luck next time */
} else if (hci_result == TOS_NOT_SUPPORTED) {
- /* This is a workaround for an unresolved issue on
+ /*
+ * This is a workaround for an unresolved issue on
* some machines where system events sporadically
- * become disabled. */
+ * become disabled.
+ */
hci_result = hci_write1(dev, HCI_SYSTEM_EVENT, 1);
pr_notice("Re-enabled hotkeys\n");
} else {
@@ -1631,7 +1644,8 @@ static const struct file_operations version_proc_fops = {
.release = single_release,
};
-/* proc and module init
+/*
+ * Proc and module init
*/
#define PROC_TOSHIBA "toshiba"
@@ -1749,7 +1763,8 @@ static ssize_t kbd_backlight_mode_store(struct device *dev,
return -EINVAL;
}
- /* Set the Keyboard Backlight Mode where:
+ /*
+ * Set the Keyboard Backlight Mode where:
* Auto - KBD backlight turns off automatically in given time
* FN-Z - KBD backlight "toggles" when hotkey pressed
* ON - KBD backlight is always on
@@ -1960,7 +1975,8 @@ static ssize_t usb_sleep_charge_store(struct device *dev,
ret = kstrtoint(buf, 0, &state);
if (ret)
return ret;
- /* Check for supported values, where:
+ /*
+ * Check for supported values, where:
* 0 - Disabled
* 1 - Alternate (Non USB conformant devices that require more power)
* 2 - Auto (USB conformant devices)
@@ -2022,7 +2038,8 @@ static ssize_t sleep_functions_on_battery_store(struct device *dev,
if (ret)
return ret;
- /* Set the status of the function:
+ /*
+ * Set the status of the function:
* 0 - Disabled
* 1-100 - Enabled
*/
@@ -2143,7 +2160,8 @@ static ssize_t kbd_function_keys_store(struct device *dev,
ret = kstrtoint(buf, 0, &mode);
if (ret)
return ret;
- /* Check for the function keys mode where:
+ /*
+ * Check for the function keys mode where:
* 0 - Normal operation (F{1-12} as usual and hotkeys via FN-F{1-12})
* 1 - Special functions (Opposite of the above setting)
*/
@@ -2223,7 +2241,8 @@ static ssize_t usb_three_store(struct device *dev,
ret = kstrtoint(buf, 0, &state);
if (ret)
return ret;
- /* Check for USB 3 mode where:
+ /*
+ * Check for USB 3 mode where:
* 0 - Disabled (Acts like a USB 2 port, saving power)
* 1 - Enabled
*/
@@ -2375,7 +2394,7 @@ static void toshiba_acpi_report_hotkey(struct toshiba_acpi_dev *dev,
if (scancode == 0x100)
return;
- /* act on key press; ignore key release */
+ /* Act on key press; ignore key release */
if (scancode & 0x80)
return;
@@ -2411,7 +2430,7 @@ static void toshiba_acpi_process_hotkeys(struct toshiba_acpi_dev *dev)
hci_result =
hci_write1(dev, HCI_SYSTEM_EVENT, 1);
pr_notice("Re-enabled hotkeys\n");
- /* fall through */
+ /* Fall through */
default:
retries--;
break;
@@ -2533,7 +2552,7 @@ static int toshiba_acpi_setup_backlight(struct toshiba_acpi_dev *dev)
props.type = BACKLIGHT_PLATFORM;
props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1;
- /* adding an extra level and having 0 change to transflective mode */
+ /* Adding an extra level and having 0 change to transflective mode */
if (dev->tr_backlight_supported)
props.max_brightness++;
--
2.1.4
^ permalink raw reply [flat|nested] 4+ messages in thread