mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Tolga Ceylan <tolga.ceylan@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Roxana Blaj <roxanagabriela10@gmail.com>,
	Ana Rey <anarey@gmail.com>, Rui Miguel Silva <rmfrfs@gmail.com>,
	Joe Perches <joe@perches.com>,
	Chaitra Ramaiah <linux.delve@gmail.com>,
	devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
	tolga.ceylan@gmail.com
Subject: [PATCH 4/4] Staging: rtl8192u: r819xU_firmware: added space after comma
Date: Thu, 19 Feb 2015 21:54:11 -0800	[thread overview]
Message-ID: <1424411651-15978-4-git-send-email-tolga.ceylan@gmail.com> (raw)
In-Reply-To: <1424411651-15978-1-git-send-email-tolga.ceylan@gmail.com>

Resolved space required after that ',' errors reported by checkpatch.

Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
---
 drivers/staging/rtl8192u/r819xU_firmware.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c
index e7b2f33..8e7fe82 100644
--- a/drivers/staging/rtl8192u/r819xU_firmware.c
+++ b/drivers/staging/rtl8192u/r819xU_firmware.c
@@ -66,7 +66,7 @@ static bool fw_download_code(struct net_device *dev, u8 *code_virtual_address,
 		skb  = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
 		if (!skb)
 			return false;
-		memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
+		memcpy((unsigned char *)(skb->cb), &dev, sizeof(dev));
 		tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
 		tcb_desc->queue_index = TXCMD_QUEUE;
 		tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT;
@@ -91,7 +91,7 @@ static bool fw_download_code(struct net_device *dev, u8 *code_virtual_address,
 		if (!priv->ieee80211->check_nic_enough_desc(dev, index) ||
 		       (!skb_queue_empty(&priv->ieee80211->skb_waitQ[index])) ||
 		       (priv->ieee80211->queue_stop)) {
-			RT_TRACE(COMP_FIRMWARE,"=====================================================> tx full!\n");
+			RT_TRACE(COMP_FIRMWARE, "=====================================================> tx full!\n");
 			skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
 		} else {
 			priv->ieee80211->softmac_hard_start_xmit(skb, dev);
@@ -242,7 +242,8 @@ bool init_firmware(struct net_device *dev)
 		 * or read image file from array. Default load from IMG file
 		 */
 		if (rst_opt == OPT_SYSTEM_RESET) {
-			rc = request_firmware(&fw_entry, fw_name[init_step],&priv->udev->dev);
+			rc = request_firmware(&fw_entry, fw_name[init_step],
+					      &priv->udev->dev);
 			if (rc < 0) {
 				RT_TRACE(COMP_ERR, "request firmware fail!\n");
 				goto download_firmware_fail;
@@ -254,12 +255,14 @@ bool init_firmware(struct net_device *dev)
 			}
 
 			if (init_step != FW_INIT_STEP1_MAIN) {
-				memcpy(pfirmware->firmware_buf,fw_entry->data,fw_entry->size);
+				memcpy(pfirmware->firmware_buf, fw_entry->data,
+				       fw_entry->size);
 				mapped_file = pfirmware->firmware_buf;
 				file_length = fw_entry->size;
 			} else {
 				memset(pfirmware->firmware_buf, 0, 128);
-				memcpy(&pfirmware->firmware_buf[128],fw_entry->data,fw_entry->size);
+				memcpy(&pfirmware->firmware_buf[128],
+				       fw_entry->data, fw_entry->size);
 				mapped_file = pfirmware->firmware_buf;
 				file_length = fw_entry->size + 128;
 			}
@@ -319,7 +322,9 @@ bool init_firmware(struct net_device *dev)
 
 			rt_status = CPUcheck_firmware_ready(dev);
 			if (rt_status != TRUE) {
-				RT_TRACE(COMP_ERR, "CPUcheck_firmware_ready fail(%d)!\n",rt_status);
+				RT_TRACE(COMP_ERR,
+					 "CPUcheck_firmware_ready fail(%d)!\n",
+					 rt_status);
 				goto download_firmware_fail;
 			}
 
-- 
2.3.0


  parent reply	other threads:[~2015-02-20  5:54 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-20  5:54 [PATCH 1/4] Staging: rtl8192u: r819xU_firmware: removed commented out variable Tolga Ceylan
2015-02-20  5:54 ` [PATCH 2/4] Staging: rtl8192u: r819xU_firmware: removed commented out assert Tolga Ceylan
2015-02-20  5:54 ` [PATCH 3/4] Staging: rtl9182u: r819xU_firmware: Replaced C99 comments with C89 Tolga Ceylan
2015-02-20  5:54 ` Tolga Ceylan [this message]
2015-02-20  7:30   ` [PATCH 4/4] Staging: rtl8192u: r819xU_firmware: added space after comma Joe Perches
2015-02-20 19:47     ` Tolga Ceylan
2015-02-21  0:31       ` Tolga Ceylan
2015-02-21  1:59         ` Joe Perches
2015-03-07  0:57   ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1424411651-15978-4-git-send-email-tolga.ceylan@gmail.com \
    --to=tolga.ceylan@gmail.com \
    --cc=anarey@gmail.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=joe@perches.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux.delve@gmail.com \
    --cc=rmfrfs@gmail.com \
    --cc=roxanagabriela10@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome