From: Wang Nan <wangnan0@huawei.com>
To: <masami.hiramatsu.pt@hitachi.com>, <rostedt@goodmis.org>
Cc: <mingo@redhat.com>, <hpa@zytor.com>, <tglx@linutronix.de>,
<x86@kernel.org>, <luto@amacapital.net>, <oleg@redhat.com>,
<dave.hansen@linux.intel.com>, <linux-kernel@vger.kernel.org>,
<lizefan@huawei.com>
Subject: [PATCH v2] x86, traps: Enable DEBUG_STACK after cpu_init() for TRAP_DB/BP.
Date: Thu, 26 Feb 2015 13:49:39 +0800 [thread overview]
Message-ID: <1424929779-13174-1-git-send-email-wangnan0@huawei.com> (raw)
Before this patch early_trap_init() installs DEBUG_STACK for X86_TRAP_BP
and X86_TRAP_DB. However, DEBUG_STACK doesn't work correctly until
cpu_init() <-- trap_init().
This patch passes 0 to set_intr_gate_ist() and
set_system_intr_gate_ist() instead of DEBUG_STACK to let it use same
stack as kernel, and installs DEBUG_STACK for them in trap_init().
As core runs at ring 0 between early_trap_init() and trap_init(), there
is no chance to get a bad stack before trap_init().
As NMI is also enabled in trap_init(), we don't need to care about
is_debug_stack() and related things used in arch/x86/kernel/nmi.c.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
---
v1 -> v2: Correct grammar issues in comments.
---
arch/x86/kernel/traps.c | 21 +++++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 9d2073e..4281988 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -925,9 +925,17 @@ dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code)
/* Set of traps needed for early debugging. */
void __init early_trap_init(void)
{
- set_intr_gate_ist(X86_TRAP_DB, &debug, DEBUG_STACK);
+ /*
+ * Don't set ist to DEBUG_STACK as it doesn't work until TSS is
+ * ready in cpu_init() <-- trap_init(). Before trap_init(), CPU
+ * runs at ring 0 so it is impossible to hit an invalid stack.
+ * Using the original stack works well enough at this early
+ * stage. DEBUG_STACK will be equipped after cpu_init() in
+ * trap_init().
+ */
+ set_intr_gate_ist(X86_TRAP_DB, &debug, 0);
/* int3 can be called from all */
- set_system_intr_gate_ist(X86_TRAP_BP, &int3, DEBUG_STACK);
+ set_system_intr_gate_ist(X86_TRAP_BP, &int3, 0);
#ifdef CONFIG_X86_32
set_intr_gate(X86_TRAP_PF, page_fault);
#endif
@@ -1005,6 +1013,15 @@ void __init trap_init(void)
*/
cpu_init();
+ /*
+ * X86_TRAP_DB and X86_TRAP_BP have been set
+ * in early_trap_init(). However, DEBUG_STACK works only after
+ * cpu_init() loads TSS. See comments in early_trap_init().
+ */
+ set_intr_gate_ist(X86_TRAP_DB, &debug, DEBUG_STACK);
+ /* int3 can be called from all */
+ set_system_intr_gate_ist(X86_TRAP_BP, &int3, DEBUG_STACK);
+
x86_init.irqs.trap_init();
#ifdef CONFIG_X86_64
--
1.8.4
next reply other threads:[~2015-02-26 5:50 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-26 5:49 Wang Nan [this message]
2015-02-26 13:12 ` [tip:x86/asm] x86/traps: " tip-bot for Wang Nan
2015-02-26 15:12 ` Andy Lutomirski
2015-02-27 2:21 ` Wang Nan
2015-02-27 2:33 ` Andy Lutomirski
2015-02-27 3:28 ` [PATCH] x86, traps: early_trap_init() cleanup Wang Nan
2015-02-27 10:11 ` Borislav Petkov
2015-02-27 4:19 ` [PATCH v2] x86, traps: separate set_intr_gate() and cleanup early_trap_init() Wang Nan
2015-03-02 9:55 ` Wang Nan
2015-03-02 17:06 ` Andy Lutomirski
2015-03-04 23:51 ` [tip:x86/asm] x86/traps: Separate set_intr_gate() and clean up early_trap_init() tip-bot for Wang Nan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1424929779-13174-1-git-send-email-wangnan0@huawei.com \
--to=wangnan0@huawei.com \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lizefan@huawei.com \
--cc=luto@amacapital.net \
--cc=masami.hiramatsu.pt@hitachi.com \
--cc=mingo@redhat.com \
--cc=oleg@redhat.com \
--cc=rostedt@goodmis.org \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®