From: tip-bot for Wang Nan <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: lizefan@huawei.com, masami.hiramatsu.pt@hitachi.com,
linux-kernel@vger.kernel.org, oleg@redhat.com,
luto@amacapital.net, hpa@zytor.com, bp@alien8.de,
mingo@kernel.org, rostedt@goodmis.org, wangnan0@huawei.com,
dave.hansen@linux.intel.com, tglx@linutronix.de
Subject: [tip:x86/asm] x86/traps: Separate set_intr_gate() and clean up early_trap_init()
Date: Wed, 4 Mar 2015 15:51:34 -0800 [thread overview]
Message-ID: <tip-5eca7453d61003bf886992388f8cb407e6f0d051@git.kernel.org> (raw)
In-Reply-To: <1425010789-13714-1-git-send-email-wangnan0@huawei.com>
Commit-ID: 5eca7453d61003bf886992388f8cb407e6f0d051
Gitweb: http://git.kernel.org/tip/5eca7453d61003bf886992388f8cb407e6f0d051
Author: Wang Nan <wangnan0@huawei.com>
AuthorDate: Fri, 27 Feb 2015 12:19:49 +0800
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Thu, 5 Mar 2015 00:47:29 +0100
x86/traps: Separate set_intr_gate() and clean up early_trap_init()
As early_trap_init() doesn't use IST, replace
set_intr_gate_ist() and set_system_intr_gate_ist() with their
standard counterparts.
set_intr_gate() requires a trace_debug symbol which we don't
have and won't use. This patch separates set_intr_gate() into two
parts, and uses base version in early_trap_init().
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: <dave.hansen@linux.intel.com>
Cc: <lizefan@huawei.com>
Cc: <masami.hiramatsu.pt@hitachi.com>
Cc: <oleg@redhat.com>
Cc: <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1425010789-13714-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
arch/x86/include/asm/desc.h | 7 ++++++-
arch/x86/kernel/traps.c | 20 ++++++++++++--------
2 files changed, 18 insertions(+), 9 deletions(-)
diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
index a94b82e..a0bf89f 100644
--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -376,11 +376,16 @@ static inline void _set_gate(int gate, unsigned type, void *addr,
* Pentium F0 0F bugfix can have resulted in the mapped
* IDT being write-protected.
*/
-#define set_intr_gate(n, addr) \
+#define set_intr_gate_notrace(n, addr) \
do { \
BUG_ON((unsigned)n > 0xFF); \
_set_gate(n, GATE_INTERRUPT, (void *)addr, 0, 0, \
__KERNEL_CS); \
+ } while (0)
+
+#define set_intr_gate(n, addr) \
+ do { \
+ set_intr_gate_notrace(n, addr); \
_trace_set_gate(n, GATE_INTERRUPT, (void *)trace_##addr,\
0, 0, __KERNEL_CS); \
} while (0)
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 4281988..9965bd1 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -926,16 +926,20 @@ dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code)
void __init early_trap_init(void)
{
/*
- * Don't set ist to DEBUG_STACK as it doesn't work until TSS is
- * ready in cpu_init() <-- trap_init(). Before trap_init(), CPU
- * runs at ring 0 so it is impossible to hit an invalid stack.
- * Using the original stack works well enough at this early
- * stage. DEBUG_STACK will be equipped after cpu_init() in
+ * Don't use IST to set DEBUG_STACK as it doesn't work until TSS
+ * is ready in cpu_init() <-- trap_init(). Before trap_init(),
+ * CPU runs at ring 0 so it is impossible to hit an invalid
+ * stack. Using the original stack works well enough at this
+ * early stage. DEBUG_STACK will be equipped after cpu_init() in
* trap_init().
+ *
+ * We don't need to set trace_idt_table like set_intr_gate(),
+ * since we don't have trace_debug and it will be reset to
+ * 'debug' in trap_init() by set_intr_gate_ist().
*/
- set_intr_gate_ist(X86_TRAP_DB, &debug, 0);
+ set_intr_gate_notrace(X86_TRAP_DB, debug);
/* int3 can be called from all */
- set_system_intr_gate_ist(X86_TRAP_BP, &int3, 0);
+ set_system_intr_gate(X86_TRAP_BP, &int3);
#ifdef CONFIG_X86_32
set_intr_gate(X86_TRAP_PF, page_fault);
#endif
@@ -1015,7 +1019,7 @@ void __init trap_init(void)
/*
* X86_TRAP_DB and X86_TRAP_BP have been set
- * in early_trap_init(). However, DEBUG_STACK works only after
+ * in early_trap_init(). However, ITS works only after
* cpu_init() loads TSS. See comments in early_trap_init().
*/
set_intr_gate_ist(X86_TRAP_DB, &debug, DEBUG_STACK);
prev parent reply other threads:[~2015-03-04 23:52 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-26 5:49 [PATCH v2] x86, traps: Enable DEBUG_STACK after cpu_init() for TRAP_DB/BP Wang Nan
2015-02-26 13:12 ` [tip:x86/asm] x86/traps: " tip-bot for Wang Nan
2015-02-26 15:12 ` Andy Lutomirski
2015-02-27 2:21 ` Wang Nan
2015-02-27 2:33 ` Andy Lutomirski
2015-02-27 3:28 ` [PATCH] x86, traps: early_trap_init() cleanup Wang Nan
2015-02-27 10:11 ` Borislav Petkov
2015-02-27 4:19 ` [PATCH v2] x86, traps: separate set_intr_gate() and cleanup early_trap_init() Wang Nan
2015-03-02 9:55 ` Wang Nan
2015-03-02 17:06 ` Andy Lutomirski
2015-03-04 23:51 ` tip-bot for Wang Nan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-5eca7453d61003bf886992388f8cb407e6f0d051@git.kernel.org \
--to=tipbot@zytor.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=lizefan@huawei.com \
--cc=luto@amacapital.net \
--cc=masami.hiramatsu.pt@hitachi.com \
--cc=mingo@kernel.org \
--cc=oleg@redhat.com \
--cc=rostedt@goodmis.org \
--cc=tglx@linutronix.de \
--cc=wangnan0@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome