Re: Re: [PATCH 6/6] PM / devfreq: Set the min_freq and max_freq of devfreq device

[MyungJoo Ham <myungjoo.ham@samsung.com>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=utf-8, Size: 1149 bytes --]

[]
> > 
> > The value 0 is used for min/max_freq to declare
> > that min/max_freq is deactivated. Therefore, it is not
> > required to do so; they are not intended to show the hardware
> > configuration as well.
> 
> This case consider the devfreq device using OPP because devfreq_set_freq_table()
> get the number of OPP entry in OPP list before setting the min_freq/max_freq.
> If the devfreq device don't use the OPP entry, devfreq_set_freq_table()
> will return without any operation.
> 
> IMHO, when devfreq device uses the OPP table including the frequency,
> min_freq/max_freq should show the correct value as CPUFREQ framework.
> 

The side effect of this patch shows up when opp_disable() and opp_enable()
are used.

For example,
1. dev->opp_disable(2GHz); /* 2GHz is the fastest and 1.6 is the second */
2. init devfreq of dev; /* setting max_freq @ 1.6G by this patch */
3. dev->opp_enable(2GHz);
4. 2GHz is still not active because max_freq is now 1.6GHz.

Cheers,
MyungJoo.


ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥