[PATCH tip/core/rcu 11/12] rcu: Make RCU able to tolerate undefined CONFIG_RCU_FANOUT_LEAF

["Paul E. McKenney" <paulmck@linux.vnet.ibm.com>]

From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>

This commit introduces an RCU_FANOUT_LEAF C-preprocessor macro so
that RCU will build even when CONFIG_RCU_FANOUT_LEAF is undefined.
The RCU_FANOUT_LEAF macro is set to the value of CONFIG_RCU_FANOUT_LEAF
when defined, otherwise it is set to 32 for 32-bit systems and 64 for
64-bit systems.  This commit then makes CONFIG_RCU_FANOUT_LEAF depend
on CONFIG_RCU_EXPERT, so that Kconfig users won't be asked about
CONFIG_RCU_FANOUT_LEAF unless they want to be.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
---
 init/Kconfig             |  2 +-
 kernel/rcu/tree.c        |  8 ++++----
 kernel/rcu/tree.h        | 12 +++++++++++-
 kernel/rcu/tree_plugin.h |  6 +++---
 4 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/init/Kconfig b/init/Kconfig
index efb098ac159d..17285e8e555d 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -601,7 +601,7 @@ config RCU_FANOUT_LEAF
 	int "Tree-based hierarchical RCU leaf-level fanout value"
 	range 2 64 if 64BIT
 	range 2 32 if !64BIT
-	depends on TREE_RCU || PREEMPT_RCU
+	depends on (TREE_RCU || PREEMPT_RCU) && RCU_EXPERT
 	default 64 if 64BIT
 	default 32 if !64BIT
 	default 16
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index 6fb8e2f0ec19..0a6d46df2194 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -120,8 +120,8 @@ module_param(dump_tree, bool, 0444);
 /* Control rcu_node-tree auto-balancing at boot time. */
 static bool rcu_fanout_exact;
 module_param(rcu_fanout_exact, bool, 0444);
-/* Increase (but not decrease) the CONFIG_RCU_FANOUT_LEAF at boot time. */
-static int rcu_fanout_leaf = CONFIG_RCU_FANOUT_LEAF;
+/* Increase (but not decrease) the RCU_FANOUT_LEAF at boot time. */
+static int rcu_fanout_leaf = RCU_FANOUT_LEAF;
 module_param(rcu_fanout_leaf, int, 0444);
 int rcu_num_lvls __read_mostly = RCU_NUM_LVLS;
 /* Number of rcu_nodes at specified level. */
@@ -4071,7 +4071,7 @@ static void __init rcu_init_geometry(void)
 		jiffies_till_next_fqs = d;
 
 	/* If the compile-time values are accurate, just leave. */
-	if (rcu_fanout_leaf == CONFIG_RCU_FANOUT_LEAF &&
+	if (rcu_fanout_leaf == RCU_FANOUT_LEAF &&
 	    nr_cpu_ids == NR_CPUS)
 		return;
 	pr_info("RCU: Adjusting geometry for rcu_fanout_leaf=%d, nr_cpu_ids=%d\n",
@@ -4097,7 +4097,7 @@ static void __init rcu_init_geometry(void)
 	 */
 	if (nr_cpu_ids > rcu_capacity[RCU_NUM_LVLS - 1])
 		panic("rcu_init_geometry: rcu_capacity[] is too small");
-	else if (rcu_fanout_leaf < CONFIG_RCU_FANOUT_LEAF ||
+	else if (rcu_fanout_leaf < RCU_FANOUT_LEAF ||
 		 rcu_fanout_leaf > sizeof(unsigned long) * 8) {
 		WARN_ON(1);
 		return;
diff --git a/kernel/rcu/tree.h b/kernel/rcu/tree.h
index ecb259273139..da9f6adb5ff9 100644
--- a/kernel/rcu/tree.h
+++ b/kernel/rcu/tree.h
@@ -46,7 +46,17 @@
 # endif
 #endif /* #else #ifdef CONFIG_RCU_FANOUT */
 
-#define RCU_FANOUT_1	      (CONFIG_RCU_FANOUT_LEAF)
+#ifdef CONFIG_RCU_FANOUT_LEAF
+#define RCU_FANOUT_LEAF CONFIG_RCU_FANOUT_LEAF
+#else /* #ifdef CONFIG_RCU_FANOUT_LEAF */
+# ifdef CONFIG_64BIT
+# define RCU_FANOUT_LEAF 64
+# else
+# define RCU_FANOUT_LEAF 32
+# endif
+#endif /* #else #ifdef CONFIG_RCU_FANOUT_LEAF */
+
+#define RCU_FANOUT_1	      (RCU_FANOUT_LEAF)
 #define RCU_FANOUT_2	      (RCU_FANOUT_1 * RCU_FANOUT)
 #define RCU_FANOUT_3	      (RCU_FANOUT_2 * RCU_FANOUT)
 #define RCU_FANOUT_4	      (RCU_FANOUT_3 * RCU_FANOUT)
diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h
index 2e52502bfc95..a2f64e4fdb57 100644
--- a/kernel/rcu/tree_plugin.h
+++ b/kernel/rcu/tree_plugin.h
@@ -86,10 +86,10 @@ static void __init rcu_bootup_announce_oddness(void)
 		pr_info("\tAdditional per-CPU info printed with stalls.\n");
 	if (RCU_NUM_LVLS >= 4)
 		pr_info("\tFour(or more)-level hierarchy is enabled.\n");
-	if (CONFIG_RCU_FANOUT_LEAF != 16)
+	if (RCU_FANOUT_LEAF != 16)
 		pr_info("\tBuild-time adjustment of leaf fanout to %d.\n",
-			CONFIG_RCU_FANOUT_LEAF);
-	if (rcu_fanout_leaf != CONFIG_RCU_FANOUT_LEAF)
+			RCU_FANOUT_LEAF);
+	if (rcu_fanout_leaf != RCU_FANOUT_LEAF)
 		pr_info("\tBoot-time adjustment of leaf fanout to %d.\n", rcu_fanout_leaf);
 	if (nr_cpu_ids != NR_CPUS)
 		pr_info("\tRCU restricting CPUs from NR_CPUS=%d to nr_cpu_ids=%d.\n", NR_CPUS, nr_cpu_ids);
-- 
1.8.1.5