[PATCH v4 20/20] clk: tegra: pll: Fix issues with rates for VCO PLLs

[Rhyland Klein <rklein@nvidia.com>]

From: Andrew Bresticker <abrestic@chromium.org>

Without this change clk_get_rate would return the final output
rather than the VCO output as it would factor in the pdiv when
it shouldn't. This will cause problems for all dividers in the
subtree of the VCO PLL.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
---
v3:
  - Added fix for this bug which was found during testing

 drivers/clk/tegra/clk-pll.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index a8d5399bff1b..8464992852b4 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -723,6 +723,8 @@ static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 		spin_lock_irqsave(pll->lock, flags);
 
 	_get_pll_mnp(pll, &old_cfg);
+	if (pll->params->vco_out)
+		cfg.p = old_cfg.p;
 
 	if (old_cfg.m != cfg.m || old_cfg.n != cfg.n || old_cfg.p != cfg.p ||
 		old_cfg.sdm_data != cfg.sdm_data)
@@ -782,11 +784,15 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
 
 	_get_pll_mnp(pll, &cfg);
 
-	pdiv = _hw_to_p_div(hw, cfg.p);
-	if (pdiv < 0) {
-		WARN(1, "Clock %s has invalid pdiv value : 0x%x\n",
-			__clk_get_name(hw->clk), cfg.p);
+	if (pll->params->vco_out) {
 		pdiv = 1;
+	} else {
+		pdiv = _hw_to_p_div(hw, cfg.p);
+		if (pdiv < 0) {
+			WARN(1, "Clock %s has invalid pdiv value : 0x%x\n",
+				__clk_get_name(hw->clk), cfg.p);
+			pdiv = 1;
+		}
 	}
 
 	if (pll->params->set_gain)
@@ -1073,6 +1079,8 @@ static int clk_pllxc_set_rate(struct clk_hw *hw, unsigned long rate,
 		spin_lock_irqsave(pll->lock, flags);
 
 	_get_pll_mnp(pll, &old_cfg);
+	if (pll->params->vco_out)
+		cfg.p = old_cfg.p;
 
 	if (old_cfg.m != cfg.m || old_cfg.n != cfg.n || old_cfg.p != cfg.p)
 		ret = _program_pll(hw, &cfg, rate);
-- 
1.7.9.5