From: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>,
dan.carpenter@oracle.com, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 11/33] staging: rtl8192e: Remove RTLLIB_DEBUG_SCAN()
Date: Sat, 9 May 2015 23:18:59 +0200 [thread overview]
Message-ID: <1431206361-13736-12-git-send-email-mateusz.kulikowski@gmail.com> (raw)
In-Reply-To: <1431206361-13736-1-git-send-email-mateusz.kulikowski@gmail.com>
Use netdev_dbg() instead, remove duplicated logs.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
---
drivers/staging/rtl8192e/rtllib.h | 1 -
drivers/staging/rtl8192e/rtllib_rx.c | 101 ++++++++++++++++-------------------
drivers/staging/rtl8192e/rtllib_wx.c | 12 +++--
3 files changed, 54 insertions(+), 60 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtllib.h b/drivers/staging/rtl8192e/rtllib.h
index 4edbc87..f7b741e 100644
--- a/drivers/staging/rtl8192e/rtllib.h
+++ b/drivers/staging/rtl8192e/rtllib.h
@@ -703,7 +703,6 @@ do { \
#define RTLLIB_DL_ERR (1<<31)
#define RTLLIB_DEBUG_INFO(f, a...) RTLLIB_DEBUG(RTLLIB_DL_INFO, f, ## a)
-#define RTLLIB_DEBUG_SCAN(f, a...) RTLLIB_DEBUG(RTLLIB_DL_SCAN, f, ## a)
#define RTLLIB_DEBUG_STATE(f, a...) RTLLIB_DEBUG(RTLLIB_DL_STATE, f, ## a)
#define RTLLIB_DEBUG_MGMT(f, a...) RTLLIB_DEBUG(RTLLIB_DL_MGMT, f, ## a)
#define RTLLIB_DEBUG_FRAG(f, a...) RTLLIB_DEBUG(RTLLIB_DL_FRAG, f, ## a)
diff --git a/drivers/staging/rtl8192e/rtllib_rx.c b/drivers/staging/rtl8192e/rtllib_rx.c
index e553b1f..9b57c7e 100644
--- a/drivers/staging/rtl8192e/rtllib_rx.c
+++ b/drivers/staging/rtl8192e/rtllib_rx.c
@@ -2103,8 +2103,8 @@ int rtllib_parse_info_param(struct rtllib_device *ieee,
break;
case MFIE_TYPE_HT_CAP:
- RTLLIB_DEBUG_SCAN("MFIE_TYPE_HT_CAP: %d bytes\n",
- info_element->len);
+ netdev_dbg(ieee->dev, "MFIE_TYPE_HT_CAP: %d bytes\n",
+ info_element->len);
tmp_htcap_len = min_t(u8, info_element->len, MAX_IE_LEN);
if (tmp_htcap_len != 0) {
network->bssht.bdHTSpecVer = HT_SPEC_VER_EWC;
@@ -2130,8 +2130,8 @@ int rtllib_parse_info_param(struct rtllib_device *ieee,
case MFIE_TYPE_HT_INFO:
- RTLLIB_DEBUG_SCAN("MFIE_TYPE_HT_INFO: %d bytes\n",
- info_element->len);
+ netdev_dbg(ieee->dev, "MFIE_TYPE_HT_INFO: %d bytes\n",
+ info_element->len);
tmp_htinfo_len = min_t(u8, info_element->len, MAX_IE_LEN);
if (tmp_htinfo_len) {
network->bssht.bdHTSpecVer = HT_SPEC_VER_IEEE;
@@ -2146,8 +2146,8 @@ int rtllib_parse_info_param(struct rtllib_device *ieee,
break;
case MFIE_TYPE_AIRONET:
- RTLLIB_DEBUG_SCAN("MFIE_TYPE_AIRONET: %d bytes\n",
- info_element->len);
+ netdev_dbg(ieee->dev, "MFIE_TYPE_AIRONET: %d bytes\n",
+ info_element->len);
if (info_element->len > IE_CISCO_FLAG_POSITION) {
network->bWithAironetIE = true;
@@ -2169,8 +2169,8 @@ int rtllib_parse_info_param(struct rtllib_device *ieee,
break;
case MFIE_TYPE_COUNTRY:
- RTLLIB_DEBUG_SCAN("MFIE_TYPE_COUNTRY: %d bytes\n",
- info_element->len);
+ netdev_dbg(ieee->dev, "MFIE_TYPE_COUNTRY: %d bytes\n",
+ info_element->len);
rtllib_extract_country_ie(ieee, info_element, network,
network->bssid);
break;
@@ -2277,10 +2277,9 @@ static inline int rtllib_network_init(
}
if (network->mode == 0) {
- RTLLIB_DEBUG_SCAN("Filtered out '%s (%pM)' network.\n",
- escape_essid(network->ssid,
- network->ssid_len),
- network->bssid);
+ netdev_dbg(ieee->dev, "Filtered out '%s (%pM)' network.\n",
+ escape_essid(network->ssid, network->ssid_len),
+ network->bssid);
return 1;
}
@@ -2478,33 +2477,32 @@ static inline void rtllib_process_probe_response(
if (!network)
return;
- RTLLIB_DEBUG_SCAN(
- "'%s' ( %pM ): %c%c%c%c %c%c%c%c-%c%c%c%c %c%c%c%c\n",
- escape_essid(info_element->data, info_element->len),
- beacon->header.addr3,
- (le16_to_cpu(beacon->capability) & (1<<0xf)) ? '1' : '0',
- (le16_to_cpu(beacon->capability) & (1<<0xe)) ? '1' : '0',
- (le16_to_cpu(beacon->capability) & (1<<0xd)) ? '1' : '0',
- (le16_to_cpu(beacon->capability) & (1<<0xc)) ? '1' : '0',
- (le16_to_cpu(beacon->capability) & (1<<0xb)) ? '1' : '0',
- (le16_to_cpu(beacon->capability) & (1<<0xa)) ? '1' : '0',
- (le16_to_cpu(beacon->capability) & (1<<0x9)) ? '1' : '0',
- (le16_to_cpu(beacon->capability) & (1<<0x8)) ? '1' : '0',
- (le16_to_cpu(beacon->capability) & (1<<0x7)) ? '1' : '0',
- (le16_to_cpu(beacon->capability) & (1<<0x6)) ? '1' : '0',
- (le16_to_cpu(beacon->capability) & (1<<0x5)) ? '1' : '0',
- (le16_to_cpu(beacon->capability) & (1<<0x4)) ? '1' : '0',
- (le16_to_cpu(beacon->capability) & (1<<0x3)) ? '1' : '0',
- (le16_to_cpu(beacon->capability) & (1<<0x2)) ? '1' : '0',
- (le16_to_cpu(beacon->capability) & (1<<0x1)) ? '1' : '0',
- (le16_to_cpu(beacon->capability) & (1<<0x0)) ? '1' : '0');
+ netdev_dbg(ieee->dev,
+ "'%s' ( %pM ): %c%c%c%c %c%c%c%c-%c%c%c%c %c%c%c%c\n",
+ escape_essid(info_element->data, info_element->len),
+ beacon->header.addr3,
+ (le16_to_cpu(beacon->capability) & (1<<0xf)) ? '1' : '0',
+ (le16_to_cpu(beacon->capability) & (1<<0xe)) ? '1' : '0',
+ (le16_to_cpu(beacon->capability) & (1<<0xd)) ? '1' : '0',
+ (le16_to_cpu(beacon->capability) & (1<<0xc)) ? '1' : '0',
+ (le16_to_cpu(beacon->capability) & (1<<0xb)) ? '1' : '0',
+ (le16_to_cpu(beacon->capability) & (1<<0xa)) ? '1' : '0',
+ (le16_to_cpu(beacon->capability) & (1<<0x9)) ? '1' : '0',
+ (le16_to_cpu(beacon->capability) & (1<<0x8)) ? '1' : '0',
+ (le16_to_cpu(beacon->capability) & (1<<0x7)) ? '1' : '0',
+ (le16_to_cpu(beacon->capability) & (1<<0x6)) ? '1' : '0',
+ (le16_to_cpu(beacon->capability) & (1<<0x5)) ? '1' : '0',
+ (le16_to_cpu(beacon->capability) & (1<<0x4)) ? '1' : '0',
+ (le16_to_cpu(beacon->capability) & (1<<0x3)) ? '1' : '0',
+ (le16_to_cpu(beacon->capability) & (1<<0x2)) ? '1' : '0',
+ (le16_to_cpu(beacon->capability) & (1<<0x1)) ? '1' : '0',
+ (le16_to_cpu(beacon->capability) & (1<<0x0)) ? '1' : '0');
if (rtllib_network_init(ieee, beacon, network, stats)) {
- RTLLIB_DEBUG_SCAN("Dropped '%s' ( %pM) via %s.\n",
- escape_essid(info_element->data,
- info_element->len), beacon->header.addr3,
- is_beacon(frame_ctl) ? "BEACON" :
- "PROBE RESPONSE");
+ netdev_dbg(ieee->dev, "Dropped '%s' ( %pM) via %s.\n",
+ escape_essid(info_element->data, info_element->len),
+ beacon->header.addr3,
+ is_beacon(frame_ctl) ? "BEACON" : "PROBE RESPONSE");
goto free_network;
}
@@ -2567,10 +2565,10 @@ static inline void rtllib_process_probe_response(
/* If there are no more slots, expire the oldest */
list_del(&oldest->list);
target = oldest;
- RTLLIB_DEBUG_SCAN("Expired '%s' ( %pM) from network list.\n",
- escape_essid(target->ssid,
- target->ssid_len),
- target->bssid);
+ netdev_dbg(ieee->dev,
+ "Expired '%s' ( %pM) from network list.\n",
+ escape_essid(target->ssid, target->ssid_len),
+ target->bssid);
} else {
/* Otherwise just pull from the free list */
target = list_entry(ieee->network_free_list.next,
@@ -2578,22 +2576,20 @@ static inline void rtllib_process_probe_response(
list_del(ieee->network_free_list.next);
}
+ netdev_dbg(ieee->dev, "Adding '%s' ( %pM) via %s.\n",
+ escape_essid(network->ssid, network->ssid_len),
+ network->bssid,
+ is_beacon(frame_ctl) ? "BEACON" : "PROBE RESPONSE");
- RTLLIB_DEBUG_SCAN("Adding '%s' ( %pM) via %s.\n",
- escape_essid(network->ssid,
- network->ssid_len), network->bssid,
- is_beacon(frame_ctl) ? "BEACON" :
- "PROBE RESPONSE");
memcpy(target, network, sizeof(*target));
list_add_tail(&target->list, &ieee->network_list);
if (ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE)
rtllib_softmac_new_net(ieee, network);
} else {
- RTLLIB_DEBUG_SCAN("Updating '%s' ( %pM) via %s.\n",
- escape_essid(target->ssid, target->ssid_len),
- target->bssid,
- is_beacon(frame_ctl) ? "BEACON" :
- "PROBE RESPONSE");
+ netdev_dbg(ieee->dev, "Updating '%s' ( %pM) via %s.\n",
+ escape_essid(target->ssid, target->ssid_len),
+ target->bssid,
+ is_beacon(frame_ctl) ? "BEACON" : "PROBE RESPONSE");
/* we have an entry and we are going to update it. But this
* entry may be already expired. In this case we do the same
@@ -2643,7 +2639,6 @@ void rtllib_rx_mgt(struct rtllib_device *ieee,
case RTLLIB_STYPE_BEACON:
RTLLIB_DEBUG_MGMT("received BEACON (%d)\n",
WLAN_FC_GET_STYPE(le16_to_cpu(header->frame_ctl)));
- RTLLIB_DEBUG_SCAN("Beacon\n");
rtllib_process_probe_response(
ieee, (struct rtllib_probe_response *)header,
stats);
@@ -2658,7 +2653,6 @@ void rtllib_rx_mgt(struct rtllib_device *ieee,
case RTLLIB_STYPE_PROBE_RESP:
RTLLIB_DEBUG_MGMT("received PROBE RESPONSE (%d)\n",
WLAN_FC_GET_STYPE(le16_to_cpu(header->frame_ctl)));
- RTLLIB_DEBUG_SCAN("Probe response\n");
rtllib_process_probe_response(ieee,
(struct rtllib_probe_response *)header, stats);
break;
@@ -2666,7 +2660,6 @@ void rtllib_rx_mgt(struct rtllib_device *ieee,
RTLLIB_DEBUG_MGMT("received PROBE RESQUEST (%d)\n",
WLAN_FC_GET_STYPE(
le16_to_cpu(header->frame_ctl)));
- RTLLIB_DEBUG_SCAN("Probe request\n");
if ((ieee->softmac_features & IEEE_SOFTMAC_PROBERS) &&
((ieee->iw_mode == IW_MODE_ADHOC ||
ieee->iw_mode == IW_MODE_MASTER) &&
diff --git a/drivers/staging/rtl8192e/rtllib_wx.c b/drivers/staging/rtl8192e/rtllib_wx.c
index c2c5f0d..2812a77 100644
--- a/drivers/staging/rtl8192e/rtllib_wx.c
+++ b/drivers/staging/rtl8192e/rtllib_wx.c
@@ -281,11 +281,13 @@ int rtllib_wx_get_scan(struct rtllib_device *ieee,
ev = rtl819x_translate_scan(ieee, ev, stop, network,
info);
else
- RTLLIB_DEBUG_SCAN("Not showing network '%s ( %pM)' due to age (%lums).\n",
- escape_essid(network->ssid,
- network->ssid_len),
- network->bssid,
- (jiffies - network->last_scanned) / (HZ / 100));
+ netdev_dbg(ieee->dev,
+ "Network '%s ( %pM)' hidden due to age (%lums).\n",
+ escape_essid(network->ssid,
+ network->ssid_len),
+ network->bssid,
+ (jiffies - network->last_scanned) /
+ (HZ / 100));
}
spin_unlock_irqrestore(&ieee->lock, flags);
--
1.8.4.1
next prev parent reply other threads:[~2015-05-09 21:26 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-09 21:18 [PATCH v3 00/33] staging: rtl8192e: Fix more checkpatch.pl warnings Mateusz Kulikowski
2015-05-09 21:18 ` [PATCH v3 01/33] staging: rtl8192e: Declare ethernet addresses as __aligned(2) Mateusz Kulikowski
2015-05-09 22:29 ` Joe Perches
2015-05-12 19:44 ` Mateusz Kulikowski
2015-05-12 19:53 ` Joe Perches
2015-05-09 21:18 ` [PATCH v3 02/33] staging: rtl8192e: Fix PREFER_ETHER_ADDR_COPY warnings Mateusz Kulikowski
2015-05-10 13:19 ` Greg KH
2015-05-12 19:52 ` Mateusz Kulikowski
2015-05-12 21:19 ` Greg KH
2015-05-14 20:22 ` Mateusz Kulikowski
2015-05-09 21:18 ` [PATCH v3 03/33] staging: rtl8192e: Mark unaligned memcpy() Mateusz Kulikowski
2015-05-10 13:20 ` Greg KH
2015-05-12 20:05 ` Mateusz Kulikowski
2015-05-11 8:26 ` Dan Carpenter
2015-05-12 20:00 ` Mateusz Kulikowski
2015-05-13 8:22 ` Dan Carpenter
2015-05-14 20:29 ` Mateusz Kulikowski
2015-05-14 23:14 ` Dan Carpenter
2015-05-17 20:38 ` Mateusz Kulikowski
2015-05-18 9:09 ` Dan Carpenter
2015-05-09 21:18 ` [PATCH v3 04/33] staging: rtl8192e: Fix DEEP_INDENTATION warning in rtllib_parse_info_param() Mateusz Kulikowski
2015-05-10 7:49 ` Sudip Mukherjee
2015-05-12 21:01 ` Mateusz Kulikowski
2015-05-13 4:45 ` Sudip Mukherjee
2015-05-13 8:26 ` Dan Carpenter
2015-05-11 13:48 ` Dan Carpenter
2015-05-12 20:46 ` Mateusz Kulikowski
2015-05-09 21:18 ` [PATCH v3 05/33] staging: rtl8192e: Replace memcmp() with ether_addr_equal_unaligned() Mateusz Kulikowski
2015-05-09 21:18 ` [PATCH v3 06/33] staging: rtl8192e: Remove rtllib_crypt.[ch] Mateusz Kulikowski
2015-05-09 21:18 ` [PATCH v3 07/33] staging: rtl8192e: Replace RTLLIB_DEBUG(DL_ERR) with netdev_*() Mateusz Kulikowski
2015-05-10 7:53 ` Sudip Mukherjee
2015-05-12 20:43 ` Mateusz Kulikowski
2015-05-09 21:18 ` [PATCH v3 08/33] staging: rtl8192e: Remove RTLLIB_ERROR() and RTLLIB_WARNING() Mateusz Kulikowski
2015-05-09 21:18 ` [PATCH v3 09/33] staging: rtl8192e: Remove RTLLIB_DEBUG_WX() Mateusz Kulikowski
2015-05-09 21:18 ` [PATCH v3 10/33] staging: rtl8192e: Simplify rtllib_proces_probe_response() Mateusz Kulikowski
2015-05-09 21:18 ` Mateusz Kulikowski [this message]
2015-05-09 21:19 ` [PATCH v3 12/33] staging: rtl8192e: Remove RTLLIB_DEBUG_(FRAG|EAP|DROP|STATE|TX|RX)() Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 13/33] staging: rtl8192e: Remove RTLLIB_DEBUG_QOS() Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 14/33] staging: rtl8192e: Remove RTLLIB_DEBUG_MGMT() Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 15/33] staging: rtl8192e: Remove RTLLIB_DEBUG_INFO() Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 16/33] staging: rtl8192e: Remove RTLLIB_DEBUG() Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 17/33] staging: rtl8192e: Remove RTLLIB_DEBUG_DATA() Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 18/33] staging: rtl8192e: Remove remains of RTLLIB_*_DEBUG() (including proc entry) Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 19/33] staging: rtl8192e: Remove assert() macro Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 20/33] staging: rtl8192e: Fix PREFER_PR_LEVEL warnings Mateusz Kulikowski
2015-05-09 22:37 ` Joe Perches
2015-05-12 20:20 ` Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 21/33] staging: rtl8192e: Fix LONG_LINE warnings Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 22/33] staging: rtl8192e: Fix LONG_LING in rtllib_parse_info_param() Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 23/33] staging: rtl8192e: Remove unimplemented iwpriv handlers Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 24/33] staging: rtl8192e: Fix OOM_MESSAGE warnings Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 25/33] staging: rtl8192e: Remove unused rtl_crypto.h Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 26/33] staging: rtl8192e: Replace ?: with max_t Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 27/33] staging: rtl8192e: Replace ?: with min_t Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 28/33] staging: rtl8192e: Replace ?: with max Mateusz Kulikowski
2015-05-11 13:22 ` Dan Carpenter
2015-05-12 20:08 ` Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 29/33] staging: rtl8192e: Remove unneeded RT_TRACE(COMP_ERR,...) Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 30/33] staging: rtl8192e: rtl8192_phy_checkBBAndRF(): Don't check MAC Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 31/33] staging: rtl8192e: Replace RT_TRACE(COMP_ERR, ...) with netdev_* Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 32/33] staging: rtl8192e: Fix trivial LONG_LINE errors Mateusz Kulikowski
2015-05-09 21:19 ` [PATCH v3 33/33] staging: rtl8192e: rtl8192E_suspend(): Fix WOL reporting Mateusz Kulikowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431206361-13736-12-git-send-email-mateusz.kulikowski@gmail.com \
--to=mateusz.kulikowski@gmail.com \
--cc=dan.carpenter@oracle.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®