From: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>,
dan.carpenter@oracle.com, joe@perches.com,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 11/35] staging: rtl8192e: Simplify rtllib_process_probe_response()
Date: Thu, 21 May 2015 17:53:24 +0200 [thread overview]
Message-ID: <1432223628-1664-12-git-send-email-mateusz.kulikowski@gmail.com> (raw)
In-Reply-To: <1432223628-1664-1-git-send-email-mateusz.kulikowski@gmail.com>
- Extract frame_ctl once and use it as variable.
- Drop endian conversion in is_beacon() function
(used in simplified function only)
- Simplify debug messages
- Invert STYPE checks in debug messages - it is valid
as only BEACON and PROBE_RESP are allowed
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
---
drivers/staging/rtl8192e/rtllib_rx.c | 37 +++++++++++++++---------------------
1 file changed, 15 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtllib_rx.c b/drivers/staging/rtl8192e/rtllib_rx.c
index 29c330a..b6de742 100644
--- a/drivers/staging/rtl8192e/rtllib_rx.c
+++ b/drivers/staging/rtl8192e/rtllib_rx.c
@@ -2461,9 +2461,9 @@ static inline void update_network(struct rtllib_network *dst,
dst->BssCcxVerNumber = src->BssCcxVerNumber;
}
-static inline int is_beacon(__le16 fc)
+static inline int is_beacon(u16 fc)
{
- return (WLAN_FC_GET_STYPE(le16_to_cpu(fc)) == RTLLIB_STYPE_BEACON);
+ return (WLAN_FC_GET_STYPE(fc) == RTLLIB_STYPE_BEACON);
}
static int IsPassiveChannel(struct rtllib_device *rtllib, u8 channel)
@@ -2504,6 +2504,7 @@ static inline void rtllib_process_probe_response(
short renew;
struct rtllib_network *network = kzalloc(sizeof(struct rtllib_network),
GFP_ATOMIC);
+ u16 frame_ctl = le16_to_cpu(beacon->header.frame_ctl);
if (!network)
return;
@@ -2532,12 +2533,9 @@ static inline void rtllib_process_probe_response(
if (rtllib_network_init(ieee, beacon, network, stats)) {
RTLLIB_DEBUG_SCAN("Dropped '%s' ( %pM) via %s.\n",
escape_essid(info_element->data,
- info_element->len),
- beacon->header.addr3,
- WLAN_FC_GET_STYPE(
- le16_to_cpu(beacon->header.frame_ctl)) ==
- RTLLIB_STYPE_PROBE_RESP ?
- "PROBE RESPONSE" : "BEACON");
+ info_element->len), beacon->header.addr3,
+ is_beacon(frame_ctl) ? "BEACON" :
+ "PROBE RESPONSE");
goto free_network;
}
@@ -2545,8 +2543,7 @@ static inline void rtllib_process_probe_response(
if (!rtllib_legal_channel(ieee, network->channel))
goto free_network;
- if (WLAN_FC_GET_STYPE(le16_to_cpu(beacon->header.frame_ctl)) ==
- RTLLIB_STYPE_PROBE_RESP) {
+ if (WLAN_FC_GET_STYPE(frame_ctl) == RTLLIB_STYPE_PROBE_RESP) {
if (IsPassiveChannel(ieee, network->channel)) {
netdev_info(ieee->dev,
"GetScanInfo(): For Global Domain, filter probe response at channel(%d).\n",
@@ -2579,7 +2576,7 @@ static inline void rtllib_process_probe_response(
else
ieee->current_network.buseprotection = false;
}
- if (is_beacon(beacon->header.frame_ctl)) {
+ if (is_beacon(frame_ctl)) {
if (ieee->state >= RTLLIB_LINKED)
ieee->LinkDetectInfo.NumRecvBcnInPeriod++;
}
@@ -2616,22 +2613,18 @@ static inline void rtllib_process_probe_response(
RTLLIB_DEBUG_SCAN("Adding '%s' ( %pM) via %s.\n",
escape_essid(network->ssid,
network->ssid_len), network->bssid,
- WLAN_FC_GET_STYPE(
- le16_to_cpu(beacon->header.frame_ctl)) ==
- RTLLIB_STYPE_PROBE_RESP ?
- "PROBE RESPONSE" : "BEACON");
+ is_beacon(frame_ctl) ? "BEACON" :
+ "PROBE RESPONSE");
memcpy(target, network, sizeof(*target));
list_add_tail(&target->list, &ieee->network_list);
if (ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE)
rtllib_softmac_new_net(ieee, network);
} else {
RTLLIB_DEBUG_SCAN("Updating '%s' ( %pM) via %s.\n",
- escape_essid(target->ssid,
- target->ssid_len), target->bssid,
- WLAN_FC_GET_STYPE(
- le16_to_cpu(beacon->header.frame_ctl)) ==
- RTLLIB_STYPE_PROBE_RESP ?
- "PROBE RESPONSE" : "BEACON");
+ escape_essid(target->ssid, target->ssid_len),
+ target->bssid,
+ is_beacon(frame_ctl) ? "BEACON" :
+ "PROBE RESPONSE");
/* we have an entry and we are going to update it. But this
* entry may be already expired. In this case we do the same
@@ -2652,7 +2645,7 @@ static inline void rtllib_process_probe_response(
}
spin_unlock_irqrestore(&ieee->lock, flags);
- if (is_beacon(beacon->header.frame_ctl) &&
+ if (is_beacon(frame_ctl) &&
is_same_network(&ieee->current_network, network,
(network->ssid_len ? 1 : 0)) &&
(ieee->state == RTLLIB_LINKED)) {
--
1.8.4.1
next prev parent reply other threads:[~2015-05-21 16:03 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-21 15:53 [PATCH v4 00/35] staging: rtl8192e: Fix more checkpatch.pl warnings Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 01/35] staging: rtl8192e: accept const MAC address Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 02/35] staging: rtl8192e: Declare ethernet addresses as __aligned(2) Mateusz Kulikowski
2015-05-25 13:53 ` Dan Carpenter
2015-05-26 20:25 ` Mateusz Kulikowski
2015-05-26 21:04 ` Joe Perches
2015-05-27 0:22 ` Dan Carpenter
2015-05-21 15:53 ` [PATCH v4 03/35] staging: rtl8192e: Fix PREFER_ETHER_ADDR_COPY warnings Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 04/35] staging: rtl8192e: Mark unaligned memcpy() Mateusz Kulikowski
2015-05-25 13:55 ` Dan Carpenter
2015-05-21 15:53 ` [PATCH v4 05/35] staging: rtl8192e: Fix DEEP_INDENTATION warning in rtllib_parse_info_param() Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 06/35] staging: rtl8192e: Replace memcmp() with ether_addr_equal_unaligned() Mateusz Kulikowski
2015-05-25 14:03 ` Dan Carpenter
2015-05-25 17:37 ` Joe Perches
2015-05-26 19:55 ` Mateusz Kulikowski
2015-05-26 19:24 ` Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 07/35] staging: rtl8192e: Remove rtllib_crypt.[ch] Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 08/35] staging: rtl8192e: Replace RTLLIB_DEBUG(DL_ERR) with netdev_*() Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 09/35] staging: rtl8192e: Remove RTLLIB_ERROR() and RTLLIB_WARNING() Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 10/35] staging: rtl8192e: Remove RTLLIB_DEBUG_WX() Mateusz Kulikowski
2015-05-21 15:53 ` Mateusz Kulikowski [this message]
2015-05-21 15:53 ` [PATCH v4 12/35] staging: rtl8192e: Remove RTLLIB_DEBUG_SCAN() Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 13/35] staging: rtl8192e: Remove RTLLIB_DEBUG_(FRAG|EAP|DROP|STATE|TX|RX)() Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 14/35] staging: rtl8192e: Remove RTLLIB_DEBUG_QOS() Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 15/35] staging: rtl8192e: Remove RTLLIB_DEBUG_MGMT() Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 16/35] staging: rtl8192e: Remove RTLLIB_DEBUG_INFO() Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 17/35] staging: rtl8192e: Remove RTLLIB_DEBUG() Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 18/35] staging: rtl8192e: Remove RTLLIB_DEBUG_DATA() Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 19/35] staging: rtl8192e: Remove remains of RTLLIB_*_DEBUG() (including proc entry) Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 20/35] staging: rtl8192e: Remove assert() macro Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 21/35] staging: rtl8192e: Fix PREFER_PR_LEVEL warnings Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 22/35] staging: rtl8192e: Fix LONG_LINE warnings Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 23/35] staging: rtl8192e: Fix LONG_LING in rtllib_parse_info_param() Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 24/35] staging: rtl8192e: Remove unimplemented iwpriv handlers Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 25/35] staging: rtl8192e: Fix OOM_MESSAGE warnings Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 26/35] staging: rtl8192e: Remove unused rtl_crypto.h Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 27/35] staging: rtl8192e: Replace ?: with max_t Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 28/35] staging: rtl8192e: Replace ?: with min_t Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 29/35] staging: rtl8192e: Replace ?: with max Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 30/35] staging: rtl8192e: Remove unneeded RT_TRACE(COMP_ERR,...) Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 31/35] staging: rtl8192e: rtl8192_phy_checkBBAndRF(): Don't check MAC Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 32/35] staging: rtl8192e: Replace RT_TRACE(COMP_ERR, ...) with netdev_* Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 33/35] staging: rtl8192e: Fix trivial LONG_LINE errors Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 34/35] staging: rtl8192e: rtl8192E_suspend(): Fix WOL reporting Mateusz Kulikowski
2015-05-21 15:53 ` [PATCH v4 35/35] staging: rtl8192e: Fix SPACING error Mateusz Kulikowski
2015-05-31 3:03 ` [PATCH v4 00/35] staging: rtl8192e: Fix more checkpatch.pl warnings Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432223628-1664-12-git-send-email-mateusz.kulikowski@gmail.com \
--to=mateusz.kulikowski@gmail.com \
--cc=dan.carpenter@oracle.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=joe@perches.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®