* [PATCH v3 1/6] arm64: Juno: Fix the GIC node address label and the frequency of FAXI clock.
2015-05-22 11:13 [PATCH v3 0/6] arm64: Juno DT updates and new DT for Juno R1 Liviu Dudau
@ 2015-05-22 11:13 ` Liviu Dudau
2015-05-22 11:13 ` [PATCH v3 2/6] arm64: Juno: Split juno.dts into juno-base.dtsi and juno.dts Liviu Dudau
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Liviu Dudau @ 2015-05-22 11:13 UTC (permalink / raw)
To: Arnd Bergmann, Olof Johansson, Rob Herring, Jon Medhurst (Tixy),
Mark Rutland, Ian Campbell, Marc Zyngier, Catalin Marinas,
Will Deacon, Sudeep Holla, devicetree, LAKML, LKML
During the review of the Juno DT files I've noticed that the GIC
node label had two digits swapped leading to a different address
being shown in the /sys/devices fs.
Sudeep also pointed that public revisions of the Juno documentation
list a different frequency for the FAXI system than what the one
I've been using when creating the DT file. Verified with the firmware
people to be the correct value in the shipped systems.
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Jon Medhurst <tixy@linaro.org>
---
arch/arm64/boot/dts/arm/juno-clocks.dtsi | 4 ++--
arch/arm64/boot/dts/arm/juno.dts | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
index c9b89ef..25352ed 100644
--- a/arch/arm64/boot/dts/arm/juno-clocks.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
@@ -36,9 +36,9 @@
clock-output-names = "apb_pclk";
};
- soc_faxiclk: refclk533mhz {
+ soc_faxiclk: refclk400mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <533000000>;
+ clock-frequency = <400000000>;
clock-output-names = "faxi_clk";
};
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
index 5e9110a..7ab0713 100644
--- a/arch/arm64/boot/dts/arm/juno.dts
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -98,7 +98,7 @@
<0x00000008 0x80000000 0x1 0x80000000>;
};
- gic: interrupt-controller@2c001000 {
+ gic: interrupt-controller@2c010000 {
compatible = "arm,gic-400", "arm,cortex-a15-gic";
reg = <0x0 0x2c010000 0 0x1000>,
<0x0 0x2c02f000 0 0x2000>,
--
2.4.0
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH v3 2/6] arm64: Juno: Split juno.dts into juno-base.dtsi and juno.dts.
2015-05-22 11:13 [PATCH v3 0/6] arm64: Juno DT updates and new DT for Juno R1 Liviu Dudau
2015-05-22 11:13 ` [PATCH v3 1/6] arm64: Juno: Fix the GIC node address label and the frequency of FAXI clock Liviu Dudau
@ 2015-05-22 11:13 ` Liviu Dudau
2015-05-22 11:13 ` [PATCH v3 3/6] arm64: Juno: Add memory mapped timer node Liviu Dudau
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Liviu Dudau @ 2015-05-22 11:13 UTC (permalink / raw)
To: Arnd Bergmann, Olof Johansson, Rob Herring, Jon Medhurst (Tixy),
Mark Rutland, Ian Campbell, Marc Zyngier, Catalin Marinas,
Will Deacon, Sudeep Holla, devicetree, LAKML, LKML
Prepare the device tree for adding more boards based on Juno r0.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
---
arch/arm64/boot/dts/arm/juno-base.dtsi | 132 +++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/arm/juno.dts | 129 +-------------------------------
2 files changed, 133 insertions(+), 128 deletions(-)
create mode 100644 arch/arm64/boot/dts/arm/juno-base.dtsi
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
new file mode 100644
index 0000000..5c4c035
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -0,0 +1,132 @@
+ /*
+ * Devices shared by all Juno boards
+ */
+
+ gic: interrupt-controller@2c010000 {
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ reg = <0x0 0x2c010000 0 0x1000>,
+ <0x0 0x2c02f000 0 0x2000>,
+ <0x0 0x2c04f000 0 0x2000>,
+ <0x0 0x2c06f000 0 0x2000>;
+ #address-cells = <0>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ /include/ "juno-clocks.dtsi"
+
+ dma@7ff00000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0x7ff00000 0 0x1000>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_faxiclk>;
+ clock-names = "apb_pclk";
+ };
+
+ soc_uart0: uart@7ff80000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x7ff80000 0x0 0x1000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ i2c@7ffa0000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x7ffa0000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ i2c-sda-hold-time-ns = <500>;
+ clocks = <&soc_smc50mhz>;
+
+ dvi0: dvi-transmitter@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ };
+
+ dvi1: dvi-transmitter@71 {
+ compatible = "nxp,tda998x";
+ reg = <0x71>;
+ };
+ };
+
+ ohci@7ffb0000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0x7ffb0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_usb48mhz>;
+ };
+
+ ehci@7ffc0000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0x7ffc0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_usb48mhz>;
+ };
+
+ memory-controller@7ffd0000 {
+ compatible = "arm,pl354", "arm,primecell";
+ reg = <0 0x7ffd0000 0 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* last 16MB of the first memory area is reserved for secure world use by firmware */
+ reg = <0x00000000 0x80000000 0x0 0x7f000000>,
+ <0x00000008 0x80000000 0x1 0x80000000>;
+ };
+
+ smb {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 15>;
+ interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>;
+
+ /include/ "juno-motherboard.dtsi"
+ };
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
index 7ab0713..d7cbdd4 100644
--- a/arch/arm64/boot/dts/arm/juno.dts
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -91,33 +91,6 @@
};
};
- memory@80000000 {
- device_type = "memory";
- /* last 16MB of the first memory area is reserved for secure world use by firmware */
- reg = <0x00000000 0x80000000 0x0 0x7f000000>,
- <0x00000008 0x80000000 0x1 0x80000000>;
- };
-
- gic: interrupt-controller@2c010000 {
- compatible = "arm,gic-400", "arm,cortex-a15-gic";
- reg = <0x0 0x2c010000 0 0x1000>,
- <0x0 0x2c02f000 0 0x2000>,
- <0x0 0x2c04f000 0 0x2000>,
- <0x0 0x2c06f000 0 0x2000>;
- #address-cells = <0>;
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
@@ -134,105 +107,5 @@
<&A53_3>;
};
- /include/ "juno-clocks.dtsi"
-
- dma@7ff00000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0x7ff00000 0 0x1000>;
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_faxiclk>;
- clock-names = "apb_pclk";
- };
-
- soc_uart0: uart@7ff80000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0 0x7ff80000 0x0 0x1000>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- i2c@7ffa0000 {
- compatible = "snps,designware-i2c";
- reg = <0x0 0x7ffa0000 0x0 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <400000>;
- i2c-sda-hold-time-ns = <500>;
- clocks = <&soc_smc50mhz>;
-
- dvi0: dvi-transmitter@70 {
- compatible = "nxp,tda998x";
- reg = <0x70>;
- };
-
- dvi1: dvi-transmitter@71 {
- compatible = "nxp,tda998x";
- reg = <0x71>;
- };
- };
-
- ohci@7ffb0000 {
- compatible = "generic-ohci";
- reg = <0x0 0x7ffb0000 0x0 0x10000>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_usb48mhz>;
- };
-
- ehci@7ffc0000 {
- compatible = "generic-ehci";
- reg = <0x0 0x7ffc0000 0x0 0x10000>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_usb48mhz>;
- };
-
- memory-controller@7ffd0000 {
- compatible = "arm,pl354", "arm,primecell";
- reg = <0 0x7ffd0000 0 0x1000>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_smc50mhz>;
- clock-names = "apb_pclk";
- };
-
- smb {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 15>;
- interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>;
-
- /include/ "juno-motherboard.dtsi"
- };
+ #include "juno-base.dtsi"
};
--
2.4.0
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH v3 3/6] arm64: Juno: Add memory mapped timer node
2015-05-22 11:13 [PATCH v3 0/6] arm64: Juno DT updates and new DT for Juno R1 Liviu Dudau
2015-05-22 11:13 ` [PATCH v3 1/6] arm64: Juno: Fix the GIC node address label and the frequency of FAXI clock Liviu Dudau
2015-05-22 11:13 ` [PATCH v3 2/6] arm64: Juno: Split juno.dts into juno-base.dtsi and juno.dts Liviu Dudau
@ 2015-05-22 11:13 ` Liviu Dudau
2015-05-22 11:13 ` [PATCH v3 4/6] arm64: Juno: Add GICv2m support in device tree Liviu Dudau
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Liviu Dudau @ 2015-05-22 11:13 UTC (permalink / raw)
To: Arnd Bergmann, Olof Johansson, Rob Herring, Jon Medhurst (Tixy),
Mark Rutland, Ian Campbell, Marc Zyngier, Catalin Marinas,
Will Deacon, Sudeep Holla, devicetree, LAKML, LKML
Juno based boards have a memory mapped timer @ 0x2a810000. This
is disabled on r0 version of the board due to an SoC errata.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
---
arch/arm64/boot/dts/arm/juno-base.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 5c4c035..b7e862f 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -2,6 +2,21 @@
* Devices shared by all Juno boards
*/
+ memtimer: timer@2a810000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0 0x2a810000 0x0 0x10000>;
+ clock-frequency = <50000000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+ frame@2a830000 {
+ frame-number = <1>;
+ interrupts = <0 60 4>;
+ reg = <0x0 0x2a830000 0x0 0x10000>;
+ };
+ };
+
gic: interrupt-controller@2c010000 {
compatible = "arm,gic-400", "arm,cortex-a15-gic";
reg = <0x0 0x2c010000 0 0x1000>,
--
2.4.0
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH v3 4/6] arm64: Juno: Add GICv2m support in device tree.
2015-05-22 11:13 [PATCH v3 0/6] arm64: Juno DT updates and new DT for Juno R1 Liviu Dudau
` (2 preceding siblings ...)
2015-05-22 11:13 ` [PATCH v3 3/6] arm64: Juno: Add memory mapped timer node Liviu Dudau
@ 2015-05-22 11:13 ` Liviu Dudau
2015-05-22 11:13 ` [PATCH v3 5/6] arm64: Add DT support for Juno r1 board Liviu Dudau
2015-05-22 11:13 ` [PATCH v3 6/6] Documentation: bindings: Add DT bindings for ARM Juno boards Liviu Dudau
5 siblings, 0 replies; 7+ messages in thread
From: Liviu Dudau @ 2015-05-22 11:13 UTC (permalink / raw)
To: Arnd Bergmann, Olof Johansson, Rob Herring, Jon Medhurst (Tixy),
Mark Rutland, Ian Campbell, Marc Zyngier, Catalin Marinas,
Will Deacon, Sudeep Holla, devicetree, LAKML, LKML
Juno contains a GICv2m extension for handling PCIe MSI messages.
Add a node declaring the first frame of the extension.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
---
arch/arm64/boot/dts/arm/juno-base.dtsi | 35 ++++++++++++++++++++--------------
1 file changed, 21 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index b7e862f..e3ee960 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -23,10 +23,17 @@
<0x0 0x2c02f000 0 0x2000>,
<0x0 0x2c04f000 0 0x2000>,
<0x0 0x2c06f000 0 0x2000>;
- #address-cells = <0>;
+ #address-cells = <2>;
#interrupt-cells = <3>;
+ #size-cells = <2>;
interrupt-controller;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+ ranges = <0 0 0 0x2c1c0000 0 0x40000>;
+ v2m_0: v2m@0 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0 0 0 0x1000>;
+ };
};
timer {
@@ -129,19 +136,19 @@
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 15>;
- interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 &gic 0 0 0 68 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 1 &gic 0 0 0 69 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 2 &gic 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 3 &gic 0 0 0 160 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 4 &gic 0 0 0 161 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 5 &gic 0 0 0 162 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 6 &gic 0 0 0 163 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 7 &gic 0 0 0 164 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 8 &gic 0 0 0 165 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 9 &gic 0 0 0 166 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>;
/include/ "juno-motherboard.dtsi"
};
--
2.4.0
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH v3 5/6] arm64: Add DT support for Juno r1 board.
2015-05-22 11:13 [PATCH v3 0/6] arm64: Juno DT updates and new DT for Juno R1 Liviu Dudau
` (3 preceding siblings ...)
2015-05-22 11:13 ` [PATCH v3 4/6] arm64: Juno: Add GICv2m support in device tree Liviu Dudau
@ 2015-05-22 11:13 ` Liviu Dudau
2015-05-22 11:13 ` [PATCH v3 6/6] Documentation: bindings: Add DT bindings for ARM Juno boards Liviu Dudau
5 siblings, 0 replies; 7+ messages in thread
From: Liviu Dudau @ 2015-05-22 11:13 UTC (permalink / raw)
To: Arnd Bergmann, Olof Johansson, Rob Herring, Jon Medhurst (Tixy),
Mark Rutland, Ian Campbell, Marc Zyngier, Catalin Marinas,
Will Deacon, Sudeep Holla, devicetree, LAKML, LKML
This board is based on Juno r0 with updated Cortex A5x revisions
and board errata fixes. It also contains coherent ThinLinks ports
on the expansion slot that allow for an AXI master on the daughter
card to participate in a coherency domain.
Support for SoC PCIe host bridge will be added as a separate series.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
---
arch/arm64/boot/dts/arm/Makefile | 2 +-
arch/arm64/boot/dts/arm/juno-r1.dts | 116 ++++++++++++++++++++++++++++++++++++
2 files changed, 117 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/arm/juno-r1.dts
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
index 301a0da..c5c98b9 100644
--- a/arch/arm64/boot/dts/arm/Makefile
+++ b/arch/arm64/boot/dts/arm/Makefile
@@ -1,5 +1,5 @@
dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb
-dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
always := $(dtb-y)
diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
new file mode 100644
index 0000000..c627511
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-r1.dts
@@ -0,0 +1,116 @@
+/*
+ * ARM Ltd. Juno Platform
+ *
+ * Copyright (c) 2015 ARM Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "ARM Juno development board (r1)";
+ compatible = "arm,juno-r1", "arm,juno", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &soc_uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ A57_0: cpu@0 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A57_L2>;
+ };
+
+ A57_1: cpu@1 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x0 0x1>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A57_L2>;
+ };
+
+ A53_0: cpu@100 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A53_1: cpu@101 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x101>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A53_2: cpu@102 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x102>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A53_3: cpu@103 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x103>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A57_L2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ A53_L2: l2-cache1 {
+ compatible = "cache";
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&A57_0>,
+ <&A57_1>,
+ <&A53_0>,
+ <&A53_1>,
+ <&A53_2>,
+ <&A53_3>;
+ };
+
+ #include "juno-base.dtsi"
+
+};
+
+&memtimer {
+ status = "okay";
+};
--
2.4.0
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH v3 6/6] Documentation: bindings: Add DT bindings for ARM Juno boards.
2015-05-22 11:13 [PATCH v3 0/6] arm64: Juno DT updates and new DT for Juno R1 Liviu Dudau
` (4 preceding siblings ...)
2015-05-22 11:13 ` [PATCH v3 5/6] arm64: Add DT support for Juno r1 board Liviu Dudau
@ 2015-05-22 11:13 ` Liviu Dudau
5 siblings, 0 replies; 7+ messages in thread
From: Liviu Dudau @ 2015-05-22 11:13 UTC (permalink / raw)
To: Arnd Bergmann, Olof Johansson, Rob Herring, Jon Medhurst (Tixy),
Mark Rutland, Ian Campbell, Marc Zyngier, Catalin Marinas,
Will Deacon, Sudeep Holla, devicetree, LAKML, LKML
List the required properties and nodes used to describe the
ARM Juno boards.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
---
Documentation/devicetree/bindings/arm/arm-boards | 66 ++++++++++++++++++++++++
1 file changed, 66 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index b78564b..1a70997 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -157,3 +157,69 @@ Example:
};
};
+
+ARM Versatile Express Boards
+-----------------------------
+For details on the device tree bindings for ARM Versatile Express boards
+please consult the vexpress.txt file in the same directory as this file.
+
+ARM Juno Boards
+----------------
+The Juno boards are targeting development for AArch64 systems. The first
+iteration, Juno r0, is a vehicle for evaluating big.LITTLE on AArch64,
+with the second iteration, Juno r1, mainly aimed at development of PCIe
+based systems. Juno r1 also has support for AXI masters placed on the TLX
+connectors to join the coherency domain.
+
+Juno boards are described in a similar way to ARM Versatile Express boards,
+with the motherboard part of the hardware being described in a separate file
+to highlight the fact that is part of the support infrastructure for the SoC.
+Juno device tree bindings also share the Versatile Express bindings as
+described under the RS1 memory mapping.
+
+Required properties (in root node):
+ compatible = "arm,juno"; /* For Juno r0 board */
+ compatible = "arm,juno-r1"; /* For Juno r1 board */
+
+Required nodes:
+The description for the board must include:
+ - a "psci" node describing the boot method used for the secondary CPUs.
+ A detailed description of the bindings used for "psci" nodes is present
+ in the psci.txt file.
+ - a "cpus" node describing the available cores and their associated
+ "enable-method"s. For more details see cpus.txt file.
+
+Example:
+
+/dts-v1/;
+/ {
+ model = "ARM Juno development board (r0)";
+ compatible = "arm,juno", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ A57_0: cpu@0 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+
+ .....
+
+ A53_0: cpu@100 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+
+ .....
+ };
+
+};
--
2.4.0
^ permalink raw reply [flat|nested] 7+ messages in thread