* [PATCH] spi: img-spfi: fix support for speeds up to 1/4th input clock
@ 2015-06-18 12:50 Sifan Naeem
2015-06-22 15:19 ` Mark Brown
0 siblings, 1 reply; 2+ messages in thread
From: Sifan Naeem @ 2015-06-18 12:50 UTC (permalink / raw)
To: broonie; +Cc: linux-spi, linux-kernel, abrestic, Sifan Naeem
Setting the Same Edge bit indicates to the spfi block to receive and
transmit data on the same edge of the spfi clock, which in turn
doubles the operating frequency of spfi.
The maximum supported frequency is limited to 1/4th of the spfi input
clock, but without this bit set the maximum would be 1/8th of the
input clock.
The current driver calculates the divisor with maximum speed at 1/4th
of the input clock, this would fail if the requested frequency is
higher than 1/8 of the input clock. Any requests for 1/8th of the
input clock would still pass.
Signed-off-by: Sifan Naeem <sifan.naeem@imgtec.com>
Fixes: 8543d0e72d43 ("spi: img-spfi: Limit bit clock to 1/4th of input clock")
Cc: <stable@vger.kernel.org> # 3.19+
---
drivers/spi/spi-img-spfi.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c
index 1eb107f..a277faf 100644
--- a/drivers/spi/spi-img-spfi.c
+++ b/drivers/spi/spi-img-spfi.c
@@ -40,6 +40,7 @@
#define SPFI_CONTROL_SOFT_RESET BIT(11)
#define SPFI_CONTROL_SEND_DMA BIT(10)
#define SPFI_CONTROL_GET_DMA BIT(9)
+#define SPFI_CONTROL_SE BIT(8)
#define SPFI_CONTROL_TMODE_SHIFT 5
#define SPFI_CONTROL_TMODE_MASK 0x7
#define SPFI_CONTROL_TMODE_SINGLE 0
@@ -491,6 +492,7 @@ static void img_spfi_config(struct spi_master *master, struct spi_device *spi,
else if (xfer->tx_nbits == SPI_NBITS_QUAD &&
xfer->rx_nbits == SPI_NBITS_QUAD)
val |= SPFI_CONTROL_TMODE_QUAD << SPFI_CONTROL_TMODE_SHIFT;
+ val |= SPFI_CONTROL_SE;
spfi_writel(spfi, val, SPFI_CONTROL);
}
--
1.7.9.5
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH] spi: img-spfi: fix support for speeds up to 1/4th input clock
2015-06-18 12:50 [PATCH] spi: img-spfi: fix support for speeds up to 1/4th input clock Sifan Naeem
@ 2015-06-22 15:19 ` Mark Brown
0 siblings, 0 replies; 2+ messages in thread
From: Mark Brown @ 2015-06-22 15:19 UTC (permalink / raw)
To: Sifan Naeem; +Cc: linux-spi, linux-kernel, abrestic
[-- Attachment #1: Type: text/plain, Size: 259 bytes --]
On Thu, Jun 18, 2015 at 01:50:54PM +0100, Sifan Naeem wrote:
> Setting the Same Edge bit indicates to the spfi block to receive and
> transmit data on the same edge of the spfi clock, which in turn
> doubles the operating frequency of spfi.
Applied, thanks.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-06-22 15:19 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-06-18 12:50 [PATCH] spi: img-spfi: fix support for speeds up to 1/4th input clock Sifan Naeem
2015-06-22 15:19 ` Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®